Knife coating definition

Knife coating means the application of a coating material to a substrate by means of drawing the substrate beneath a knife that spreads the coating evenly over the full width of the substrate.
Knife coating means the application of a coating material to
Knife coating means the application of a coating material to a substrate by means of drawing the substrate beneath a blade that spreads the coating evenly over the width of the substrate. "Roller coating" the coating material is applied to the moving fabric, in a direction opposite to the movement of the

Examples of Knife coating in a sentence

  • Knife coating, a) Floating knife,b) Knife over roller, c) Knife over the blanketb.

  • Table IEmission Limits of VOCs for Paper, Film and Foil Surface Coatings if Potential VOC Emissions from a Single Line, Prior to Control, are 25 Tonsper Year or MoreWeight of VOC per Weight of Coating Solids, as AppliedRACT LimitsPaper, Film, and Foil Surface(1) Rotogravure coating.(2) Reverse roll coating.(3) Knife coating.

  • For the purpose of this Rule, the following definitions apply: (1) "Knife coating" means the application of a coating material to a substrate by means of drawing the substrate beneath a knife that spreads the coating evenly over the full width of the substrate.

  • Knife coating is relatively inexpensive, but it is not appropriate for coating unstable materials, such as some knit goods, or when a high degree of accuracy in the coating thickness is required.

  • Calendaring, Flexible film laminating, Knife coating, Roller coating, Nip coating, Cast coating, Extrusion coating, Spray coating, Foam coating, UV-Cured coating and Powder Coating are the techniques used for coating depending on the type of adhesives or polymeric material[15].


More Definitions of Knife coating

Knife coating means the application of a coating material to a
Knife coating means the application of a coating material to a substrate by means of drawing the substrate beneath a blade that spreads the coating evenly over the width of the substrate. "Paper coating" means uniform distribution of coatings put
Knife coating means the application of a coating material to a substrate by means of drawing the substrate beneath a knife that spreads the coating evenly over the full width of the substrate.4 TITLE 7 NATURAL RESOURCES & ENVIRONMENTAL CONTROL DELAWARE ADMINISTRATIVE CODE
Knife coating means the application of a coating material to a substrate by means of
Knife coating means the application of a coating material to "Major Source" means, to the extent provided by the federal a substrate by means of drawing the substrate beneath a blade that Clean Air Act as applicable to these rules:

Related to Knife coating

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • Nuclear coating means any protective coating used to seal porous surfaces, such as steel or concrete, that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long term (service life) cumulative radiation exposure (ASTM D4082-83**), relatively easy to decontaminate (ASTM D4256-83**), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM 3912-80**). General protective requirements are outlined by the Department of Energy (formerly United States Atomic Energy Commission Regulatory Guide 1.54**).

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Undercoating means any aerosol product designed to impart a protective, non-paint layer to the undercarriage, trunk interior, and/or firewall of motor vehicles to prevent the formation of rust or to deaden sound. “Undercoating” includes, but is not limited to, rubberized, mastic, or asphaltic products.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • factory means any premises including the precincts thereof—

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.

  • Prosthesis means an artificial substitute for a missing body part.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Laser means any device excepting a Class 1 device which can be made to produce or amplify electromagnetic radiation in the wave length range from 100 nanometres to 1 millimetre primarily by the process of controlled stimulated emission.

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Architectural coating means a coating applied to stationary structures and their appurtenances, to mobile homes, to pavements, or to curbs.

  • Physiotherapist means a person who is a) duly registered with the Supplementary Medical Professions Council of Hong Kong pursuant to the Supplementary Medical Professions Ordinance (Cap. 359 of the Laws of Hong Kong) or in relation to jurisdictions outside of Hong Kong, a body of equivalent standing; and b) legally authorised for practising physiotherapy in the locality where the treatment is provided to an Insured, but in no circumstance shall include the Insured, the Policyholder, an insurance intermediary or an employer, employee, Immediate Family Member or business partner(s) of the Policyholder and/or the Insured(s).

  • Seaplane means an aeroplane capable normally of taking off from and alighting solely on water;