Kilowatts definition

Kilowatts means 1,000 watts of electrical energy. “Loblaw” means Loblaw Companies Limited.
Sample 1Sample 2
Kilowatts or "KW" means 1,000 watts of electrical power;
Sample 1Sample 2
Kilowatts means peak power, which is the highest rated kilovoltage of a CT system mul- tiplied by the maximum rated amperage multiplied by the “power factor” or power conversion effi- ciency of a system as established by the manufacturer.
Sample 1

Examples of Kilowatts in a sentence

  • This Confidential Information Memorandum (“CIM”) is being delivered to prospective purchasers to assist them in deciding whether they wish to acquire the Property.

  • The customer’s aggregated new Maximum Demand must be in excess of 1,000 Kilowatts with a minimum of a 70% load factor.

  • The purpose of this Net Energy Metering (NEM) Application and Interconnection Agreement for Solar and/or Wind Electric Generating Facilities of 30 Kilowatts or Less (Agreement) is to allow Customer to interconnect with Pacific Gas and Electric Company’s (PG&E) Distribution System, subject to the provisions of this Agreement and PG&E’s Electric Schedule Net Energy Metering (NEM).

  • K = Kilowatts of capacity the qualifying facility contracts to provide.

  • QFs with a peak generating capacity of 1,000 kW and under may choose to utilize Net Metering as specified in NH RSA 362-A:9 and in PART Puc 900 Net Metering For Customer-Owned Renewable Energy Generation Resources of 1,000 Kilowatts or Less, and/or pursuant to the applicable alternative net energy metering tariff described in vi or vii below.

  • Max running amps X operating voltage = running kilowatts (then) Running Kilowatts x 4= Starting Kilowatts required to start the compressors drive motor.

  • Rate (Kilowatts): Nearest 1/10th of a kilowatt through 1000 kW; nearest kilowatt above 1000 kW.

  • For projects generating electricity, a written statement from the distribution utility that the interconnection between the project and the distribution utility complies with the applicable interconnection, testing, and operational requirements, though not necessarily the net metering requirements, of Puc 900, “Net Metering for Customer-Owned Renewable Energy Generation Resources of 1,000 Kilowatts or Less,” or in the alternative, Puc 307.06.

  • DEMAND CHARGE: A Demand Charge is a rate applied to a customer's billing demand expressed in Kilowatts (kW).

  • Residential Electric Space Heating units will be so staged to permit no more than 15 Kilowatts to be switched at one time by heating controls.


More Definitions of Kilowatts

Kilowatts or “kW” means kilowatt.
Sample 1
Kilowatts means peak power, which is the highest rated kilovoltage of a CT X-ray system multiplied by the maximum rated am­ perage multiplied by the power factor.
Sample 1

Related to Kilowatts

  • Kilowatt-hour or “kWh” shall mean three decimal six million (3.6 10E6) Joule

  • Ton means a ton of two thousand two hundred and forty (2,240) lbs. net dry weight;

  • kWh means kilowatt-hour.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • kW means kilowatt.

  • Tonne means metric tonne (1000 kilograms.)

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • kVA means kilovolt-ampere or kilovolt-amperes;

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Psig means pounds per square inch gauge.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Cubic Metre means the volume of gas which occupies one cubic metre when such gas is at a temperature of 15 degrees Celsius, and at a pressure of 101.325 kilopascals absolute;

  • Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • MWh means megawatt-hour.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • MW means megawatt.

  • MMBtu means one million British Thermal Units.

  • MMcf means one million cubic feet.

  • Gallon means a United States gallon of two hundred thirty-one cubic inches of liquid at 60º Fahrenheit, and at the equivalent vapor pressure of the liquid.

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Exceedance means a condition that is detected by monitoring that provides data in terms of an emission limitation or standard and that indicates that emissions (or opacity) are greater than the applicable emission limitation or standard (or less than the applicable standard in the case of a percent reduction requirement) consistent with any averaging period specified for averaging the results of the monitoring.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.