Initial Spare Parts definition

Initial Spare Parts means the initial supply of Parts which Seller will deliver to Buyer under Part 3.7 as specifically identified in Appendix K.
Sample 1Sample 2
Initial Spare Parts means the equipment and parts initially required for the maintenance and operation of the Project described in Section 2.6.
Sample 1
Initial Spare Parts. Means the Spare Parts purchased in the framework of the Initial Order.
Sample 1

Examples of Initial Spare Parts in a sentence

  • Seller shall submit to Purchaser for Purchaser’s Written Approval a recommended list of Initial Spare Parts at least two (2) months prior to the scheduled Asset Transfer Date.

  • Purchaser may require Seller to purchase additional Initial Spare Parts, provided that the Purchase Price shall be increased by the supplier-invoiced cost thereof.

  • All Initial Spare Parts supplied hereunder shall be new and properly packaged for storage and shall be subject to the warranty provisions in Article 8.

  • Seller shall use all reasonable efforts to secure the lowest pricing obtainable for such additional Initial Spare Parts.

  • All Initial Spare Parts supplied hereunder shall be new and properly packaged for storage and shall be subject to the warranty provisions in Article 9 herein.

  • The Purchaser may require the Seller to purchase additional Initial Spare Parts, provided that the Purchase Price shall be increased by the supplier-invoiced cost thereof to the extent the total cost of all Initial Spare Parts exceeds the amount specified in the previous sentence.

  • The Seller shall use all reasonable efforts to secure the lowest pricing obtainable for such additional Initial Spare Parts.

  • The Seller shall submit to the Purchaser for the Purchaser’s Written Approval a recommended list of Initial Spare Parts at least six (6) months prior to the Closing Date.

  • CONSULTANT will review and recommend to BPCL for approval the quantity of Initial Spare Parts which, in the opinion of CONSULTANT, will be adequate for first 24 months of operation and maintenance from start-up.

  • Provision of Initial Spare Parts and Consumables: Four (4) pieces Guide Rollers; Three (3) Sets of Belts as Installed in the unit;  Three (3) Sets of Vehicle Lights Assembly as Installed in the unit; Two (2) Sets of Windshield Wipers as Installed in the unit; and Other Parts and Consumables needed for the first Preventive Maintenance Service as prescribed in the maintenance manual.


More Definitions of Initial Spare Parts

Initial Spare Parts has the meaning set forth in Section 2.4.
Sample 1
Initial Spare Parts means those Parts identified as such in Exhibit E.
Sample 1
Initial Spare Parts means such spare parts as are reasonably expected to be necessary for the first twelve (12) months of operation of a Typhoon Unit;
Sample 1
Initial Spare Parts means an initial supply of components for the Covered Units, as more specifically identified in Exhibit 3 and owned and maintained by MCV for use as described in Article 6. Upon delivery to the Site the Initial Spare Parts shall be redesignated Mandatory Spare Parts.
Sample 1

Related to Initial Spare Parts

  • Spare Parts has the meaning assigned to such term in the Pledge and Security Agreement.

  • Cultivation site means a location where cannabis is planted, grown, harvested, dried, cured, graded, or trimmed, or a location where any combination of those activities occurs.

  • Large municipal separate storm sewer system means all municipal separate storm sewers that are either:

  • Spares means a part or a sub-assembly or assembly for substitution which is ready to replace an identical or similar part or sub-assembly or assembly including a component or an accessory;

  • Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.

  • Harvest lot means a specifically identified quantity of marijuana that is, cultivated utilizing the same growing practices and harvested within a 72 hour period at the same location and cured under uniform conditions.

  • Provisioning center means a licensee that is a commercial entity located in Michigan that purchases marihuana from a grower or processor and sells, supplies, or provides marihuana to registered qualifying patients, directly or through the patients' registered primary caregivers. Provisioning center includes any commercial property where marihuana is sold at retail to registered qualifying patients or registered primary caregivers. A noncommercial location used by a primary caregiver to assist a qualifying patient connected to the caregiver in accordance with the Michigan Medical Marihuana Act, MCL 333.26421 et seq., is not a provisioning center for purposes of this article.

  • Commissioning Period means, with respect to each Subproject, the period commencing upon the first delivery of Feed Gas to the Subproject in accordance with Sections 4.8 and 11.1 of the Agreement continuing through achievement of RFSU, commissioning, Start Up, Performance Testing and achievement of Substantial Completion for such Subproject.

  • Commissioning Date means that date when construction of the contemplated Project is complete, and the Maintenance Term commences;

  • Training Agreement means an agreement registered under the provisions of the Industrial and Commercial Training Act 1985.

  • Juvenile correctional center, "JCC," or "facility" means a public or private facility, operated by or under contract with the Department of Juvenile Justice, where 24-hour per day care is provided to residents under the direct care of the department.

  • municipal spatial development framework means a municipal spatial development framework adopted by the Municipality in terms of Chapter 5 of the Municipal Systems Act;

  • Small municipal separate storm sewer system or "small MS4" means all separate storm sewers that are (i) owned or operated by the United States, a state, city, town, borough, county, parish, district, association, or other public body (created by or pursuant to state law) having jurisdiction over disposal of sewage, industrial wastes, stormwater, or other wastes, including special districts under state law such as a sewer district, flood control district or drainage district, or similar entity, or an Indian tribe or an authorized Indian tribal organization, or a designated and approved management agency under § 208 of the CWA that discharges to surface waters and (ii) not defined as "large" or "medium" municipal separate storm sewer systems or designated under 4VAC50-60-380 A 1. This term includes systems similar to separate storm sewer systems in municipalities, such as systems at military bases, large hospital or prison complexes, and highway and other thoroughfares. The term does not include separate storm sewers in very discrete areas, such as individual buildings.

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Technical Specifications means the detailed requirements for the Work furnished by the Architect and set forth in Book 3 of the Contract Documents.

  • Transportation project means any project that the department is authorized by law to undertake including but not limited to a highway, tollway, bridge, mass transit, intelligent transportation system, traffic management, traveler information services, or any other project for transportation purposes.

  • Project Start Date means the first Milestone Start Date specified in Schedule B;

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • fall prevention equipment means equipment used to prevent persons from falling from a fall risk position, inducing personal equipment, a body harness, lanyards, lifelines or physical equipment such as guard-rails, screens, barricades, anchorages or similar equipment;

  • Stand Alone System Upgrade Facilities means System Upgrade Facilities that a Developer may construct without affecting day-to-day operations of the New York State Transmission System during their construction. NYISO, the Connecting Transmission Owner and the Developer must agree as to what constitutes Stand Alone System Upgrade Facilities and identify them in Appendix A to this Agreement.

  • Installation Site means the site at which the Product is originally installed.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Aircraft means any machine that can derive support in the atmosphere from the reactions of the air other than the reactions of the air against the earth’s surface;

  • Fixed wing turbine powered aircraft means an aircraft that:

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.