Hydrostatic pressure testing wastewater definition

Hydrostatic pressure testing wastewater means waters used to test the structural integrity of new tanks and pipelines, and tanks and pipelines which have been used to hold or transfer drinking water, sewage, petroleum, or natural gas.
Sample 1Sample 2Sample 3
Hydrostatic pressure testing wastewater means waters used to test the structural integrity of new tanks and pipelines, and tanks and pipelines which have been used to hold or transfer drinking water, sewage, petroleum, or natural gas. This does not include Potable water system maintenance or sampling wastewaters as defined in this general permit. Tanks previously holding petroleum based products must be cleaned in accordance with the American Petroleum Institute Standard 2015 dated January 1, 2018 (Requirements for Safe Entry and Cleaning of Petroleum Storage Tanks, Eighth Edition).
Sample 1Sample 2Sample 3
Hydrostatic pressure testing wastewater means waters used to test the structural integrity of new tanks and pipelines, and tanks and pipelines which have been used to hold or transfer sewage, petroleum, or natural gas. This does not include Potable water system maintenance or sampling wastewaters as defined in this general permit. Tanks previously holding petroleum based products must be cleaned in accordance with the American
Sample 1

Examples of Hydrostatic pressure testing wastewater in a sentence

  • III(10)Submit to Electorate: Council shall certify such ordinance or resolution to the Board of Elections to be submitted to the electors at the election more than 60 days after approval Art.

  • So far, GFATM has awarded and approved many proposals to support national plans in fighting AIDS, tuberculosis, and malaria inmany countries.The idea of an international funding mechanism to fight these diseases crys- tallized at the Okinawa G8 Summit in July 2000.

  • Water Quality – DEEP Comment: Hydrostatic pressure testing wastewater discharges resulting from this project are authorized as “potable water system maintenance wastewaters” under the Comprehensive General Permit for Discharges to Surface Water and Groundwater (Comprehensive General Permit).

Related to Hydrostatic pressure testing wastewater

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Aquatic invasive species means any invasive, prohibited,

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Process Wastewater means any water which, during manufacturing or processing, comes into direct contact with or results from the production or use of any raw material, intermediate product, finished product, by-product, or waste product.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Cannabis testing facility means an entity registered by

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Negative pressure respirator (tight fitting) means a respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Emission control system means the electronic engine management controller and any emission related component in the exhaust or evaporative system which supplies an input to or receives an output from this controller.

  • Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:

  • Wastewater treatment plant means a facility designed and constructed to receive, treat, or store waterborne or liquid wastes.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Invasive plant species means species of plants not historically found in California that spread outside cultivated areas and can damage environmental or economic resources. Invasive species may be regulated by county agricultural agencies as noxious species. Lists of invasive plants are maintained at the California Invasive Plant Inventory and USDA invasive and noxious weeds database.

  • Septic tank means a water tight tank designed to receive sewage and to effect the adequate decomposition of organic matter in sewage by bacterial action;

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Transportation project means any project that the department is authorized by law to undertake including but not limited to a highway, tollway, bridge, mass transit, intelligent transportation system, traffic management, traveler information services, or any other project for transportation purposes.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.