Hour Meter definition

Hour Meter means the equipment in the Equipment which is used to measure the amount of use.
Sample 1Sample 2
Hour Meter means the equipment in the Goods which is used to measure the amount of use by reference to hours.
Sample 1Sample 2
Hour Meter means and refer to a manufactured instrument for accurately measuring and recording elapsed pumping times in hours and tenths of an hour.
Sample 1Sample 2

Examples of Hour Meter in a sentence

  • The cab instrument panel (Dash) shall contain as a minimum an Electronic Fuel Gauge, Engine Hour Meter, Oil Pressure Gauge, Temperature Gauge, Ammeter or Voltmeter and an Engine Tachometer.

  • The minimum Billing Demand under this Rate Schedule shall be 50 kWs. DETERMINATION OF AVERAGE POWER FACTOR The Average Power Factor for the month shall be determined by computation from the registration of a Watt-Hour Meter, and a reactive volt-ampere-hour meter, by dividing the registration of the Watt- Hour Meter by the square root of the sum of the square of the registration of the Watt-Hour Meter and the square of the registration of the reactive volt-ampere-hour meter.

  • Hour Meter: Displays the elapsed run time in days, hours, and minutes.

  • Certified copy of the notification of readings of Service Hour Meter applicable for the particular month.

  • Pressing ENTER on the 25th screen, the program will advance to the next parameter (Hour Meter) since that is the end of the available memory.

  • PCS adds the current of the two sensors and controls the loads so that the current does not exceed 20 amps.Generator: PCS senses power to the Gen Hour Meter to determine this mode of operation.

  • Engine Hour Meter, “VDO”, “HOBBS” or equal analog type, to be back-lit.

  • BuCor shall install a Kilowatt Hour Meter with ERC seal and meter test report to determine actual energy consumption including wiring components (wires & conduits, fitting accessories, switches, etc.).

  • Instrument Panel Gauges shall consist of the following: 7-Digit Odometer (million-mile), Speedometer, Tachometer, Transmission Temp gauge, Voltmeter, Oil Pressure gauge, Coolant Temp gauge, Fuel gauge and Hour Meter.

  • Check the Hour Meter, Speedometer and Kilometer readings and notify any defects and determine any correction factor on the statement-cum-bill in case the readings are found to be defective.


More Definitions of Hour Meter

Hour Meter means an instrument that measures and records the actual hours of operation of the vehicle or device to which the instrument is attached.
Sample 1

Related to Hour Meter

  • Master Meter means the meter controlled by the licensed distributor and used for settlement of the master bill with the master consumer;

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Net meter means an appropriate energy meter capable of recording both import & export of electricity or a pair of meters one each for recording the import and export of electricity as the case may be;

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Non-Retail Behind The Meter Generation means Behind the Meter Generation that is used by municipal electric systems, electric cooperatives, or electric distribution companies to serve load.

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • interval meter means a meter that measures and records electricity use on an hourly or sub-hourly basis;

  • Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Hot Weather Alert means the notice provided by PJM to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for extreme hot and/or humid weather conditions which may cause capacity requirements and/or unit unavailability to be substantially higher than forecast are expected to persist for an extended period. IDR Transfer Agreement:

  • Basic generation service or "BGS" means electric generation

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • smart metering system means an electronic system that can measure energy consumption, providing more information than a conventional meter, and can transmit and receive data for information, monitoring and control purposes, using a form of electronic communication;

  • CAISO-Approved Meter means any revenue quality, electric energy measurement meter furnished by Seller, that (a) is designed, manufactured and installed in accordance with the CAISO’s metering requirements, or, to the extent that the CAISO’s metering requirements do not apply, Prudent Electrical Practices, and (b) includes all of the associated metering transformers and related appurtenances that are required in order to measure the net electric energy output from the Generating Facility.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Open type traction battery means a type of battery requiring liquid and generating hydrogen gas released to the atmosphere.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • Alarm system means equipment and devices assembled for the purpose of:

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.