Fabrication plant definition

Fabrication plant means a plant to manufacture fuel elements or other components containing nuclear material and includes the plant’s storage and analytical sections.
Sample 1Sample 2Sample 3
Fabrication plant means a plant to manufacture fuel elements or other components containing nuclear material and includes the plant's storage and analytical sections.
Sample 1
Fabrication plant shall have the meaning set forth in Recital A hereof.
Sample 1

Examples of Fabrication plant in a sentence

  • Fabrication plant has annual approval for methods and materials to be used.See Shop Drawing.Fabrication at other locations may be approved, after facilities inspection, contact HQ.

  • Supervisor should have good knowledge of Fabrication plant activities.

  • The annual physical inventory verification at the CERCA HEU Fabrication plant in Romans-sur-Isère (France) was carried out in November and was globally satisfactory.

  • Failure to furnish all information required in Bidding Documents or to submit a bid not substantially responsive to the Bidding Documents in every respect shall be at the bidder’s risk, resulting in the rejection of its bid.

  • However, there will be 2-shift operation in a day for assistance during fabrication of jobs in Fabrication plant.

  • Fabrication plant inspections if required will be billed portal to portal at the current IRS rate.

  • The conduct of the election itself shall be as provided in Uniform Local Union Constitution, Article VI, Sections 3 and 4.

  • The Zanibo brand name is in the market for past 5 years, and now the company has decided to opt for the D2C platform from past couple of years.

  • Airport Rd.N IH - 35Berry CreekSH 195 Figure 4.6 Location and layout of the Georgetown PPCP pilot project4.4.1 Construction Procedures The following Figures provided by CTR, UT-Austin from Figures 4.7 to 4.38 illustrate the construcion, fabrication, and installation procedure.Panel Fabrication Figure4.7. The Precast Prestressed Concrete Panels Fabrication plant Figure 4.8 Looking down the side (left) and from the top (right) of the casting bed Figure 4.9 Schematic Diagram of Base Panel Figure 4.10.

  • Contact information shall be made available to the Matcor Metal Fabrication plant being supplied.

Related to Fabrication plant

  • Fabrication means making up data or results and recording or reporting them.

  • Construction Plant means appliances, machinery with necessary supply to up keep and maintenance of the works or temporary works but dose not include materials or other things intended to form part of the permanent work.

  • Cannabis plant means any plant of the genus Cannabis;

  • Plant means the machinery and apparatus intended to form or forming part of the Works.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Fabricating means to make, build, create, produce, or assemble components or property to work in a new or different manner.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Cannabis processing facility means a person that:

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Transportation project means any project that the department is authorized by law to undertake including but not limited to a highway, tollway, bridge, mass transit, intelligent transportation system, traffic management, traveler information services, or any other project for transportation purposes.

  • cogeneration means the simultaneous generation in one process of thermal energy and electrical or mechanical energy;

  • Cogeneration facility means a power plant in which the heat or steam is also used for industrial or commercial heating or cooling purposes and that meets Federal Energy Regulatory Commission standards for qualifying facilities under the Public Utility Regulatory Policies Act of 1978 (16

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Manufacturing means all activities related to the manufacture of a Compound, including planning, purchasing, manufacture, processing, compounding, storage, filling, packaging, waste disposal, labeling, leafleting, testing, quality assurance, sample retention, stability testing, release, dispatch and supply, as applicable.

  • Weapons system supplier means any prime contractor or first tier subcontractor engaged in, or having a known prospective interest in the development, production or analysis of any of the weapon systems, as well as any major component or subassembly of such system.

  • Pressurized gas duster means a pressurized product labeled to remove dust from a surface solely by means of mass air or gas flow, including surfaces such as photographs, photographic film negatives, computer keyboards, and other types of surfaces that cannot be cleaned with solvents. “Pressurized Gas Duster” does not include “Dusting Aid.”

  • Cannabis testing facility means an entity registered by

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Data Processing Equipment means any equipment, computer hardware, or computer software (and the lease or licensing agreements related thereto) other than Personal Computers, owned or leased by the Failed Bank at Bank Closing, which is, was, or could have been used by the Failed Bank in connection with data processing activities.

  • Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.

  • Ethanol means a high octane gasoline blend stock that is used to make various grades of gasoline.

  • The Works/Project means the works to be executed or done under this contract.