E.164 definition

E.164 means the ITU-T Recommendation E.164: The International Public Telecommunication Numbering Plan, 2010.
Sample 1Sample 2Sample 3
E.164 means the E.164 numbering structure as defined by the International Telecommunication Union - Telecommunication Standardization Sector (ITU-T).
Sample 1Sample 2Sample 3
E.164 means the main ITU-T Recommendation on numbering entitled “The international public telecommunication numbering plan.”
Sample 1Sample 2

Examples of E.164 in a sentence

  • The E.164 addresses are 15 decimal digits long and include a country code, area or city code, and a local number.2.4 The Authority reserves the right to require the Licensee to comply with additional safety and security safeguards to enhance security measures for public and national safety.

  • Test in accordance with ASTM E164 and AWS D1.1 for 100 percent of all full penetration welds, braced and moment frame column splices, and a minimum of 20 percent of all other partial penetration column splices, at random.

  • According to the Constitutional Court of the Czech Republic “ in the Charter, the right to respect for private life is not guaranteed in one all-encompassing article (as is the case with Article 8 of the Convention).

  • Welding Ultrasonic Testing: Test in accordance with ASTM E164 and AWS D1.1 for 100 percent of all full penetration welds, braced and moment frame column splices, and a minimum of 20 percent of all other partial penetration column splices, at random.

  • Go to Systems > Navigator and locate or create the folder to which you want the systems added.2. Click Add Systems.3. Go to the Pre-register Systems tab.4. Select the primary identifier to use for the systems; a MAC address, IP address, or serial number for legacy systems.5. For each system, add the primary identifier.You may also choose to add a System Name, H.323 ID, E.164 Alias, SIP URI, and a Password if required.

  • Mealling, "The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM)", RFC 3761, April 2004.

  • Ultrasonically test all penetration welds in accordance with ASTM E164.

  • Select the number of bridge addresses up to a maximum of 25.b. Specify whether the bridge allows H.323, SIP or both.c. Specify the E.164 Alias, H.323 ID and/or SIP URI for pre-configured conference on the bridge.

  • Translation of E.164 number / private number to IP address allotted to any device and vice versa, by the licensee to show compliance with IANA numbering scheme is not permitted.

  • ITU–T Recommendation E.164.1 (‘‘ITU–T E.164.1’’), ‘‘Series E: Overall Network Operation, Telephone Service, Service Operation and Human Factors: International Operation—Numbering Plan of the International Telephone Service: Criteria and Procedures for the Reservation, Assignment, and Rec- lamation of E.164 Country Codes and Associated Identification Codes (ICs)’’ (09/2008), IBR approved for § 80.1101.


More Definitions of E.164

E.164 means the ITU-T numbering plan for the world-wide public switched telephone network (PSTN).
Sample 1
E.164 means the ITU-T Recommendation in The International Public Telecommunication Numbering Plan, 2010;
Sample 1

Related to E.164

  • PM10 means particulate matter with an aerodynamic diameter less than or equal to a nominal 10 micrometers as measured by the applicable reference method or an equivalent method.

  • Pistol means any firearm with a barrel less than sixteen inches in length, or is designed to be held and fired by the use of a single hand.

  • Front Yard means a yard extending across the full width of a lot between the front lot line of the lot and the nearest wall of the nearest main building or structure on the lot;

  • NI 45-102 means National Instrument 45-102 – Resale of Securities.

  • MARPOL 73/78 means the International Convention for the Prevention of Pollution from Ships, 1973, as amended by the Protocol of 1978 relating thereto and by any other amendment in force thereafter;

  • Y1 is the year, expressed as a number, in which the first day of the Interest Period falls;

  • NI 51-102 means National Instrument 51-102 – Continuous Disclosure Obligations;

  • MI 11-102 means Multilateral Instrument 11-102 – Passport System;

  • PM2.5 means particulate matter with an aerodynamic diameter less than or equal to a nominal 2.5 micrometers as measured by a reference method based on 40 CFR Part 50 Appendix L and designated in accordance with 40 CFR Part 53 or by an equivalent method designated in accordance with 40 CFR Part 53.

  • Xxxxxxx Xxx 0000 means the Xxxxxxx Xxx 0000 and any subordinate legislation made under that Act from time to time together with any guidance or codes of practice issued by the relevant government department concerning the legislation.

  • NI 81-102 means National Instrument 81-102 – Investment Funds.

  • N1 means the number of calendar days in the relevant Interest Period; “d” means the number of calendar days in the relevant Interest Period; “Margin” has the meaning specified in the Final Terms;

  • NI 45-106 means National Instrument 45-106 – Prospectus Exemptions;

  • Expanded polystyrene means blown polystyrene and expanded

  • L1 means the lowest tender or lowest bid or the lowest quotation received in a tender, bidding process or other procurement solicitation as adjudged in the evaluation process as per the tender or other procurement solicitation.

  • IIA means the Israeli Innovation Authority (previously known as the Office of Chief Scientist of the Ministry of Economy and Industry of Israel or the OCS).

  • MI 61-101 means Multilateral Instrument 61-101 – Protection of Minority Security Holders in Special Transactions;

  • NI 44-102 means National Instrument 44-102 – Shelf Distributions;

  • NI 62-104 means National Instrument 62-104 Take-Over Bids and Issuer Bids adopted by the Canadian securities regulatory authorities, as now in effect or as the same may from time to time be amended, re-enacted or replaced;

  • NI 52-109 means National Instrument 52-109 – Certification of Disclosure in Issuers’ Annual and Interim Filings;

  • Enamel means a coat of colored material, usually opaque, that is applied as a protective topcoat over a basecoat, primer, or a previously applied enamel coat. In some cases, another finishing material may be applied as a topcoat over the enamel.

  • MI 62-104 means Multilateral Instrument 62-104 Take-Over Bids and Issuer Bids;

  • GAC10 means granular activated carbon filter beds with an empty-bed contact time of 10 minutes based on average daily flow and a carbon reactivation frequency of every 180 days, except that the reactivation frequency for GAC10 used as a best available technology for compliance with MCLs under subsection 9.2.1.2 shall be 120 days.

  • Y2 is the year, expressed as a number, in which the day immediately following the last day of the Interest Period falls;

  • Floodproofing means any combination of structural and nonstructural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitation facilities, structures, and their contents.

  • N2 means, in respect of each Interest Period, the number of Calculation Days during such Interest Period, as determined by the Calculation Agent.