DSR Capacity definition

DSR Capacity means the demand side response capacity (otherwise known as “flexible capacity”), available at the Customer Premises from time to time, for either demand increase or reduction, or generation increase or reduction, or charging and discharging of storage, which may result in energy export, available to be despatched via the Gridimp Solution.
Sample 1

Examples of DSR Capacity in a sentence

  • By no later than the date falling 10 Working Days prior to the commencement of the first Bidding Window, an Applicant for a Prequalified DSR CMU may issue a notification to the Delivery Body nominating the capacity (in MW) that it wishes to bid into the Capacity Auction with respect to that DSR CMU provided that such capacity is no greater than .the product (in MW to three decimal places) of the DSR Capacity of such DSR CMU and the De-rating Factor (“the original derated capacity”).

  • By no later than the date falling 10 Working Days prior to the commencement of the first Bidding Window, an Applicant for a Prequalified DSR CMU may issue a notification to the Delivery Body nominating the capacity (in MW) that it wishes to bid into the Capacity Auction with respect to that DSR CMU provided that such capacity is no greater than the product (in MW to three decimal places) of the DSR Capacity of such DSR CMU and the De-rating Factor (“the original derated capacity”).

  • Suppose the social payoff to worker i is affine with respect to the externality he imposes on the others, and logistic in the externality they impose on him.

  • Product of: (a) for a Generating CMU or an Interconnector CMU, its Connection Capacity; or (b) for a DSR CMU, its DSR Capacity; and the De- rating Factor, provided that the De-rated Capacity of a Pre-Refurbishment CMU must not exceed the De-rated Capacity of the related Refurbishing CMU; and2.

  • This view is only partially validated in our regressions which reveal a negative coefficient (see Models(11) in tables 9, 11, and 13).

  • National Grid has 5 days from receipt of meter data from the Settlement Body to calculate:• Baseline Demand (over the 6-week baseline period); • the DSR evidenced (which can be zero); and • the Proven DSR Capacity 5.

  • One further minor amendment has been added in line with NGET’s consultation response confirming that in the event of a Joint DSR Test demonstrating that a Capacity Committed DSR CMU has a Proven DSR Capacity of less than 2MW, the General Eligibility Criteria set out in the Regulation are not met.

  • Aggregators don’t need prior permission from suppliers to enter these markets and they can aggregate small loads from across the country (Exeter University, 2019, Barriers to Independent Aggregators in Europe).• Ancillary services are procured via bilateral contracts between the Supplier and the SO Capacity Market Most of the awarded DSR Capacity Market contracts have been negotiated via aggregators(Business Green, 2018).

  • De-rated Capacity is currently defined as: “for any CMU and Capacity Auction, an amount (in MW to three decimal places) equal to the product of: (a) for a Generating CMU or an Interconnector CMU, its Connection Capacity; or (b) for a DSR CMU, its DSR Capacity; and the De-rating Factor, provided that the De-rated Capacity of a Pre-Refurbishment CMU must not exceed the De-rated Capacity of the related Refurbishing CMU”.

  • CMUs are classified as follows: generators and interconnectors that arecurrently operational (‘Existing’), generators investing in an existing asset (‘Refurbishing’) and new generators and interconnectors (‘New Build’).5 Except for the TAs which are only for DSR Capacity Market Units.6 The Electricity Capacity Regulations 2014 and the Capacity Market Rules.

Related to DSR Capacity

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.