DRAWINGS OR PLANS definition

DRAWINGS OR PLANS. Drawings" or "Plans" means all drawings, plans, depictions, and designs either provided by CES, or prepared by Contractor, and required for the construction, erection, installation and completion of the Work.
DRAWINGS OR PLANS means only those drawings specifically referred to as such in these documents or in any Addendum which show the scope, extent and character of the Work to be furnished and performed the by CONTRACTOR and which have been prepared or approved by the ENGINEER. Shop Drawings are not Drawings as so defined. Drawings issued after the execution of the Contract to explain further, to illustrate, or to show changes in the Work will be known as "Supplementary Drawings" and shall be binding upon the CONTRACTOR with the same force as the Plans.
DRAWINGS OR PLANS means the drawings or plans referred to in the specification and any modification of work drawings approved in writing by the Engineer and such other drawings may from time to time be furnished or approved by the Engineer.

Examples of DRAWINGS OR PLANS in a sentence

  • FBC(2014) 105.3.1.5 SUBMIT TWO SETS OF DRAWINGS OR PLANS FROM A QUALIFIED LICENSED DESIGN PROFESSIONAL ADDRESSING ALL THE SCOPES OF WORK FOR ALL STRUCTURAL MODIFICATIONS AND ALTERATIONS TO THE BUILDING STRUCTURE AND BUILDING SYSTEMS, EXTERIOR AND INTERIOR.

  • FBC(2014) 105.3.1.5 SUBMIT TWO SETS OF DRAWINGS OR PLANS FROM A QUALIFIED LICENSED DESIGN PROFESSIONAL ADDRESSING ALL THE SCOPE OF WORK FOR ALL STRUCTURAL MODIFICATIONS AND ALTERATIONS TO THE BUILDING STRUCTURE AND BUILDING SYSTEMS, EXTERIOR AND INTERIOR.

  • UNLESS OTHERWISE SPECIFICALLY STATED (SEE SECTION 2.10), DRAWINGS OR PLANS FOR A PROPOSED IMPROVEMENT MUST BE SUBMITTED TO THE LRDRC AND THE WRITTEN APPROVAL OF THE LRDRC OBTAINED BEFORE THE IMPROVEMENTS ARE MADE.Drawings digitally submitted must be high resolution.

  • UNLESS OTHERWISE SPECIFICALLY STATED, DRAWINGS OR PLANS FOR A PROPOSED IMPROVEMENT MUST BE SUBMITTED TO THE ARCHITECTURAL REVIEW COMMITTEE AND THE WRITTEN APPROVAL OF THE ARCHITECTURAL REVIEW COMMITTEE MUST BE OBTAINED BEFORE THE IMPROVEMENTS ARE MADE.These Standards and Procedures contain both rules and informational direction.

  • DRAWINGS OR PLANS: "Drawings" or "Plans" means all drawings, plans, depictions, and designs either provided by CES, or prepared by Contractor, and required for the construction, erection, installation and completion of the Work.

  • OUTLETS: REPLACEMENT OF RECEPTACLES SHALL COMPLY WITH 406.4 (D)(1) THRU (D)(6) GFI'S REQUIRED AS PER NEC 108.8 OUTLET SPACING AS REQUIRED UNDER NEC 210.52 FBC(2014) 105.3.1.5 SUBMIT TWO SETS OF DRAWINGS OR PLANS FROM A QUALIFIED LICENSED DESIGN PROFESSIONAL ADDRESSING ALL THE SCOPES OF WORK FOR ALL STRUCTURAL MODIFICATIONS AND ALTERATIONS TO THE BUILDING STRUCTURE AND BUILDING SYSTEMS, EXTERIOR AND INTERIOR.

  • Memory Model: Release ConsistencyIn order to combat long network latencies, many distributed shared memory or shared object systems have adopted some form of relaxed consistency.

  • FBC(2014) 107.1.1 SUBMIT TWO SETS OF DRAWINGS OR PLANS FROM A QUALIFIED LICENSED DESIGN PROFESSIONAL ADDRESSING ALL THE SCOPES OF WORK FOR ALL STRUCTURAL MODIFICATIONS AND ALTERATIONS TO THE BUILDING STRUCTURE AND BUILDING SYSTEMS, EXTERIOR AND INTERIOR.


More Definitions of DRAWINGS OR PLANS

DRAWINGS OR PLANS means the official drawings or exact reproductions which show the location, character, dimensions and details of the Airport and the Work to be done and which are considered a part of the Contract, supplementary to the Specifications.
DRAWINGS OR PLANS means all (a) drawings furnished by the Owner and/or Architect as a basis for the award of Contract and for construction of the Project; (b) supplementary drawings furnished by the Owner and/or Architect to clarify and to define in greater detail the intent of the Contract drawings and specifications; (c) drawings submitted by the successful Contractor as may be required after the Contract is awarded; (d) drawings furnished by the Owner and/or Architect to the Contractor during the progress of the Work; and (e) engineering data and drawings submitted by the Contractor during the progress of the Work, provided such drawings are acceptable to the Architect and Owner.

Related to DRAWINGS OR PLANS

  • The DRAWINGS / MAPS means the drawing/map or drawings/maps mentioned in NIT and any modifications of them approved by the Employer or any further Working drawings/maps or sketches by the Employer or any further working drawings/maps or sketches which may be furnished or approved in writing by the Employer.

  • Drawings means the drawings prepared by the Architects and issued by the Engineer and referred to in the specifications and any modifications of such drawings as may be issued by the Engineer from time to time ‘Contract value shall mean value of the entire work as stipulated in the letter of acceptance of tender subject such additions there to or deductions there from as may be made under the provide herein after contained.

  • Approved Plans means a stock option or similar plan for the benefit of employees or others which has been approved by the stockholders of the Acquiror.

  • Prior Plans means, collectively, the Company’s 2006 Long-Term Incentive Plan, as amended, 2009 Long-Term Incentive Plan, 2012 Long-Term Incentive Plan and 2013 Long-Term Incentive Plan. Awards granted under the Prior Plans continue to be governed under the terms of those Prior Plans.

  • Contract Drawings means those drawings specifically entitled as such and listed in the Specifications or in any Addendum, or any drawings furnished by the Commissioner, pertaining or supplemental thereto.

  • Sub-Plans means any sub-plan to the Plan that has been adopted by the Board or the Committee for the purpose of permitting the offering of Awards to employees of certain Designated Foreign Subsidiaries or otherwise outside the United States of America, with each such sub-plan designed to comply with local laws applicable to offerings in such foreign jurisdictions. Although any Sub-Plan may be designated a separate and independent plan from the Plan in order to comply with applicable local laws, the Absolute Share Limit and the other limits specified in Section 5(b) shall apply in the aggregate to the Plan and any Sub-Plan adopted hereunder.

  • Unfunded Pension Liabilities means the excess of a Plan’s benefit liabilities under Section 4001(a)(16) of ERISA, over the current value of that Plan’s assets, determined in accordance with the assumptions used by the Plan’s actuaries for funding the Plan pursuant to Section 412 of the Code for the applicable plan year.

  • Final Plans with respect to any particular work or improvement means Plans which (i) have received final approval from all governmental authorities required to approve such Plans prior to completion of the work or improvements and (ii) contain sufficient specificity to permit the completion of the work or improvement.

  • benefit liabilities has the meaning specified in section 4001 of ERISA and the terms “current value” and “present value” have the meaning specified in section 3 of ERISA.

  • Unfunded Benefit Liabilities means with respect to any Plan at any time, the amount (if any) by which (i) the present value of all benefit liabilities under such Plan as defined in Section 4001(a)(16) of ERISA, exceeds (ii) the fair market value of all Plan assets allocable to such benefits, all determined as of the then most recent valuation date for such Plan (on the basis of assumptions prescribed by the PBGC for the purpose of Section 4044 of ERISA).

  • Unfunded Pension Liability means the excess of a Pension Plan’s benefit liabilities under Section 4001(a)(16) of ERISA, over the current value of that Pension Plan’s assets, determined in accordance with the assumptions used for funding the Pension Plan pursuant to Section 412 of the Code for the applicable plan year.

  • Administrative Plans means investment plans offered by the Management Company and approved by the Commission, where such plans allow investors a specific investment strategy in any one or a combination of Schemes managed by the Management Company in accordance with the conditions specified by SECP.

  • Equity Plans meanss the stock option and incentive plans adopted and maintained by the Company from time to time.

  • Awards means, collectively, Options, Purchased Stock, Bonus Stock, Stock Appreciation Rights, Phantom Stock, Restricted Stock, Performance Awards, or Other Stock or Performance Based Awards.

  • This Plan means, in a COB provision, the part of the contract providing the health care benefits to which the COB provision applies and which may be reduced because of the benefits of other plans. Any other part of the contract providing health care benefits is separate from this plan. A contract may apply one COB provision to certain benefits, such as dental benefits, coordinating only with similar benefits, and may apply another COB provision to coordinate other benefits.

  • Working Drawings means the final working drawings approved by Landlord, as amended from time to time by any approved changes thereto, and “Work” means all improvements to be constructed in accordance with and as indicated on the Working Drawings, together with any work required by governmental authorities to be made to other areas of the Building as a result of the improvements indicated by the Working Drawings. Landlord’s approval of the Working Drawings shall not be a representation or warranty of Landlord that such drawings are adequate for any use or comply with any Law, but shall merely be the consent of Landlord thereto. Tenant shall, at Landlord’s request, sign the Working Drawings to evidence its review and approval thereof. After the Working Drawings have been approved, Tenant shall cause the Work to be performed in accordance with the Working Drawings.

  • Plan 3 means the teachers' retirement system, plan 3

  • Record Drawings means a reproducible set of Construction Documents into which the Architect has incorporated: (a) clarifications, sketches and other Modifications made by the Architect during the Construction Phase; and (b) significant changes in the Work made during construction as shown on the Trade Contractor’s As-Built Drawings.

  • Construction Plans means plans, drawings, specifications and related documents, and construction schedules for the construction of the Work, together with all supplements, amendments or corrections approved by the City in accordance with the Municipal Code and this Agreement.

  • Plan A means the 1997 Incentive Stock Option Plan;

  • Building Plans mean the general building plans and specifications in respect of the Development or in respect of any part or parts of the Development prepared by the Authorized Person and approved by the Building Authority and includes any approved amendments thereto;

  • Old Plans has the meaning set forth in Section 6.8(b).

  • Shop Drawings means drawings, submitted to the PHA by the Contractor, subcontractor, or any lower tier subcontractor, showing in detail (1) the proposed fabrication and assembly of structural elements and (2) the installation (i.e., form, fit, and attachment details) of materials of equipment. It includes drawings, diagrams, layouts, schematics, descriptive literature, illustrations, schedules, performance and test data, and similar materials furnished by the Contractor to explain in detail specific portions of the work required by the contract. The PHA may duplicate, use, and disclose in any manner and for any purpose shop drawings delivered under this contract.

  • Canadian Pension Plans means each pension plan required to be registered under Canadian federal or provincial law that is maintained or contributed to by a Credit Party for its employees or former employees, but does not include the Canada Pension Plan or the Quebec Pension Plan as maintained by the Government of Canada or the Province of Quebec, respectively.

  • Approved Plan means plan for the building or lay out plan approved by the Authority in accordance with prescribed regulations.

  • Compensation Plans shall have the meaning set forth in Section 3.8(b).