Distance Measurement definition

Distance Measurement means measuring distance from a GPS receiver on a Course to a feature on the Course using GPS.
Sample 1Sample 2Sample 3
Distance Measurement description" : "For statistical purposes, a distance measurement is necessary which requires data from a GPS sensor. This data is needed for the evaluation software and therefore stored in memory." }, ...] Return explanation This service returns a list of similar requirements to the given requirement (input requirement). The requirements in the list follow the same format as the input requirement.
Sample 1
Distance Measurement description": "For statistical purposes, a distance measurement is necessary which needs data from a GPS sensor. This data is needed for the evaluation software and therefore stored in memory." }, { "id": "2", "title": "Data-Storage Function", "description": "For evaluation purposes, the data should be stored in the internal memory. The memory is used for saving the measured information such as the distance, the height, the average heart rate, and the calorie consumption. The stored data in the memory will then be used by the evaluation software." }] Response example [{"id": 1, "popularity": 0.72}, {"id": 2, "popularity": 0.28}]
Sample 1

Examples of Distance Measurement in a sentence

  • Time and Distance Measurement, False Start Control For capturing the results of the competition: • Fully Automatic Timing and Photo Finish System must be used.

  • The location and mileages of all signs shall be determined utilizing a Distance Measurement Instrument (DMI) or Global Positioning System (GPS).

  • P.R.J. Saey et al., “A Long Distance Measurement of Radioxenon in Yellowknife, Canada, in Late October 2006,” Geophysical Research Letters, vol.

  • In difficult terrain, the alignment may have to be negotiated through a series of short chords, preferably, the traverse should be done with a theodolite with Electronic Distance Measurement (EDM) and all angles measured with double reversal method.

  • In these cases, the front bib (with the transponder) will be handed out at the Call Room.Video Distance Measurement (VDM) will be used as the official measurement system to determine the results in the horizontal jumps.

  • One Chief Measurement Judge (Scientific) and one or more assistants shall be appointed when Electronic or Video Distance Measurement or other scientific measurement device is to be used.

  • The location and mileages of all signs shall be determined utilizing a Distance Measurement Instrument (DMI).

  • Video Distance Measurement: For the video system, there shall be two designated officials operating the system who shall jointly agree on the marking of the impact point.

  • Kim, et al., Intermolecular Distance Measurement with TNT Suppressor on the M13 Bacteriophage-Based F¨orster Resonance Energy Transfer System, Sci.

  • In these cases the front bib (with the transponder) will be handed out at the Call Room.Video Distance Measurement (VDM) will be used as the official measurement system to determine the results in the horizontal jumps.


More Definitions of Distance Measurement

Distance Measurement description": "For statistical purposes, a distance measurement is necessary which needs data from a GPS sensor. This data is needed for the evaluation software and therefore stored in memory." }, { "id": 3, "title": "GPS", "description": "To capture position data, a GPS sensor should be used. Through the measured position and time information, the speed and the distance can be measured." }, { "id": 4, "title": "Speed Measurement", "description": "As evaluation after a workout, the average speed must be shown. The following statistics should be displayed: average speed and maximum speed. For measuring the average and maximum speed, time and distance have to be measured, and a storage unit for storing the data is necessary." }, { "id": 5, "title": "Ideal BMI", "description": "Based on the data on height, weight, body fat, age and gender, the watch should be able to calculate the ideal BMI for a user." }, { "id": 6, "title": "Infrared", "description": "In order to be able to connect the watch with a computer, WLAN, Bluetooth, and infrared modules must be available." }, { "id": 7, "title": "Data-Storage Function", "description": "For evaluation purposes, the data should be stored in the internal memory. The memory is used for saving the measured information such as the distance, the height, the average heart rate, and the calorie consumption. The stored data in the memory will then be used by the evaluation software." }, { "id": 8, "title": "Time Measurement", "description": "The clock must have an internal timer which is used for saving the current time and the measured time during a workout. This time information is then stored in memory and used for further evaluation of the data." } ]
Sample 1
Distance Measurement text" : "For statistical purposes, a distance measurement is necessary which requires data from a GPS sensor. This data is needed for the evaluation software and therefore stored in memory.", “effort”: 5, “created_at”: 2018-04-22 }, ...] Return explanation This service returns a list of similar requirements to the given requirement (input requirement). To increase the precision the similarity calculation has access to all requirements stored in the database. The requirements in the list follow the same format as the input requirement.
Sample 1

Related to Distance Measurement

  • Performance Measurement Period has the meaning set forth in Section 3.1(e)(ii).

  • Performance Measure means one or more of the following selected by the Committee to measure Company, Affiliate, and/or business unit performance for a Performance Period, whether in absolute or relative terms (including, without limitation, terms relative to a peer group or index): basic, diluted, or adjusted earnings per share; sales or revenue; earnings before interest, taxes, and other adjustments (in total or on a per share basis); basic or adjusted net income; returns on equity, assets, capital, revenue or similar measure; economic value added; working capital; total shareholder return; and product development, product market share, research, licensing, litigation, human resources, information services, mergers, acquisitions, sales of assets of Affiliates or business units. Each such measure shall be, to the extent applicable, determined in accordance with generally accepted accounting principles as consistently applied by the Company (or such other standard applied by the Committee) and, if so determined by the Committee, and in the case of a Performance Compensation Award, to the extent permitted under Code Section 162(m), adjusted to omit the effects of extraordinary items, gain or loss on the disposal of a business segment, unusual or infrequently occurring events and transactions and cumulative effects of changes in accounting principles. Performance Measures may vary from Performance Period to Performance Period and from Participant to Participant, and may be established on a stand-alone basis, in tandem or in the alternative.

  • Performance Measures means measures as described in Article 12 on which the performance goals are based and which are approved by the Company’s shareholders pursuant to this Plan in order to qualify Awards as Performance-Based Compensation.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Measurement means metered volumes at a custody transfer meter through a turbine, Coriolis, or such other meter.

  • ROIC means Return on Invested Capital and represents a ratio of Adjusted net income to Average Invested Capital. The Company believes this is a useful profitability measure as it excludes non-cash expenses (income) from both the numerator and denominator.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Minimum Level (ML means the concentration at which the entire analytical system must give a recognizable signal and an acceptable calibration point. The ML is the concentration in a sample that is equivalent to the concentration of the lowest calibration standard analyzed by a specific analytical procedure, assuming that all the method-specified sample weights, volumes and processing steps have been followed.

  • Motor-driven cycle means every motorcycle that has a gasoline engine that (i) displaces less than

  • Barrier Level means the Barrier Level as specified in § 1 of the Product and Underlying Data.

  • Working level month (WLM) means an exposure to 1 working level for 170 hours (2,000 working hours per year divided by 12 months per year is approximately equal to 170 hours per month).

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Corrective Measure The contractor shall repair and deficiencies which do not meet the performance guideline.

  • Quantitative fit test or "QNFT" means an assessment of the adequacy of respirator fit by numerically measuring the amount of leakage into the respirator.

  • Performance Metrics means criteria established by the Administrator relating to any of the following, as it may apply to an individual, one or more business units, divisions, or Affiliates, or on a company-wide basis, and in absolute terms, relative to a base period, or relative to the performance of one or more comparable companies, peer groups, or an index covering multiple companies:

  • Digital Signal Level 1 or "DS1" means the 1.544 Mbps first-level signal in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS1 is the initial level of multiplexing. There are twenty-eight (28) DS1s in a DS3.

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • COVID-19 Measures means any quarantine, “shelter in place,” “stay at home,” workforce reduction, social distancing, shut down, closure, sequester or any other Law, directive, guidelines or recommendations by any Governmental Authority (including the Centers for Disease Control and the World Health Organization) in each case in connection with, related to or in response to COVID-19, including the Coronavirus Aid, Relief, and Economic Security Act (CARES) or any changes thereto.

  • Digital Signal Level 3 (DS-3 means the 44.736 Mbps third level signal in the time division multiplex hierarchy.

  • Digital Signal Level 1 (DS-1 means the 1.544 Mbps first level signal in the time division multiplex hierarchy.

  • Maximum Concentration Level Assessment means the Maximum Concentration Level Assessment for the purposes of a Basic Comprehensive Certificate of Approval, described in the Basic Comprehensive User Guide, prepared by a Toxicologist using currently available toxicological information, that demonstrates that the concentration at any Point of Impingement for a Compound of Concern that does not have a Ministry Point of Impingement Limit is not likely to cause an adverse effect as defined by the EPA. The concentration at Point of Impingement for a Compound of Concern must be calculated in accordance with O. Reg. 419/05.

  • Severity Level means the actual impact of a Defect on a user’s operational environment as further described in the table below.

  • Weighting with respect to an Underlying means the weighting in relation to the relevant Underlying as specified in the table in the definition of such Underlying.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Over-Riding Nomination Criteria means the criteria set out in clause 4.2.