Directional signals definition

Directional signals means an electrical or mechanical signal device capable of clearly indicating an intention to turn either to the right or to the left and which shall be visible from both the front and rear.
Sample 1Sample 2Sample 3

Examples of Directional signals in a sentence

  • Directional signals meeting the requirements of this chapter shall be used or lamps meeting these requirements, mounted so as to comply with turn signal installa- tion.(am) In addition to any other lamps authorized under this sub- section, a motor truck having a gross vehicle weight rating of more than 26,000 pounds may be equipped with a 360−degree flashing or rotating amber light mounted at the highest practicable point.

  • If as and when IWAI feels that for effective achievements of the covered objects of the contract, it is desirable that any Technical manpower, Data entry operator and other allied manpower of the Agency has to be removed and/or changed, the IWAI had the right to issue instruction to the effect to the Agency who shall abide by the same.

  • Directional signals to be complete with front and rear lights, self-canceling control lever on the steering column, Hazard lights and Daytime running lights.

  • Directional signals shall be connected in a manner so as to permit “4-way” flash.

  • Jan Schall, associate professor, sociology, to travel to Oxford, England, April 10-27, 2008, for evaluation of the Oxford, England Spring Semester Study Abroad Program.

  • Directional signals shall meet all federal, state and local motor vehicle standards.

  • Directional signals and stop/tail lights shall be LED based on industry standards.

  • Directional signals shall be operated by a foot switch mounted on the floor of the left side of operator near high beam control switch.

  • Directional signals meeting the requirements of this chapter shall be used or lamps meeting these requirements, mounted so as to comply with turn signal installa- tion.(b) Whenever any vehicle other than an automobile, which is equipped as permitted in par.

  • Directional signals include mirrors, flashlights, laser lights, shielded IR lights, chem-lights and specially shaped IR reflectors.

Related to Directional signals

  • Directional sign means a sign that contains only directional information regarding and the identification of 1 of the following:

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Common Channel Signaling (“CCS”) is a method of digitally transmitting call set-up and network control data over a digital signaling network fully separate from the public switched telephone network that carries the actual call.

  • Digital Signal Level 3 or "DS3" means the 44.736 Mbps third-level signal in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS3 is defined as the third level of multiplexing.

  • Digital Signal Level 1 (DS-1 means the 1.544 Mbps first level signal in the time division multiplex hierarchy.

  • Digital Signal Level 0 or "DS0" means the 64 Kbps zero-level signal in the time-division multiplex hierarchy.

  • Digital Signal Level 1 or "DS1" means the 1.544 Mbps first-level signal in the time-division multiplex hierarchy. In the time-division multiplexing hierarchy of the telephone network, DS1 is the initial level of multiplexing. There are twenty-eight (28) DS1s in a DS3.

  • Connectivity means the provision of a Permanent Separated Bicycle Lane system that reflects desired routes between all major origins and destinations in the city.

  • Digital Signal Level means one of several transmission rates in the time-division multiplex hierarchy.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Digital Signal Level 0 (DS-0 means the lowest-level signal in the time division multiplex digital hierarchy, and represents a voice-grade channel operating at either the 56 Kbps or 64 Kbps transmission bit rates. There are twenty-four (24) DS-0 channels in a DS-1.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Instructional materials means relevant instructional

  • Digital Signal Level 3 (DS-3 means the 44.736 Mbps third level signal in the time division multiplex hierarchy.

  • Common Channel Signaling (CCS means an out-of-band, packet-switched, signaling network used to transport supervision signals, control signals, and data messages. It is a special network, fully separate from the transmission path of the public switched network. Unless otherwise agreed by the Parties, the CCS protocol used by the Parties shall be SS7.

  • Interconnection Regulations means the Telecommunication (Broadcasting and Cable) Services Interconnection (Addressable Systems) Regulations, 2017 (as amended).

  • Instructional material means instructional content that is provided to a student, regardless of its format, including printed or representational materials, audiovisual materials, and materials in electronic or digital formats (such as materials accessible through the Internet). The term does not include academic tests or academic assessments. 20 USC §1232h(c)(6)(A).

  • Communication technology means an electronic device or process that:

  • Safety Management System means a systematic approach to managing safety, including the necessary organizational structures, accountabilities, policies and procedures;

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Digital Signature means authentication of any electronic record by a subscriber by means of an electronic method or procedure in accordance with the provisions of section 3;

  • Wall sign means either a sign applied with paint or similar substance on the surface of a wall or a sign attached essentially parallel to and extending not more than 24 inches from the wall of a building with no copy on the sides or edges.

  • Interoperability means the ability of a CenturyLink OSS Function to process seamlessly (i.e., without any manual intervention) business transactions with CLEC's OSS application, and vice versa, by means of secure exchange of transaction data models that use data fields and usage rules that can be received and processed by the other Party to achieve the intended OSS Function and related response. (See also Electronic Bonding.)

  • Multiple Bill/Single Tariff means the billing method used when Switched Exchange Access Services is jointly provided by the Parties. As described in the MECAB document, each Party will render a bill in accordance with its own tariff for that portion of the service it provides. Each Party will bill its own network access service rates.

  • Terrestrial means to live on or grow from land.