Deceleration rate definition

Deceleration rate means the total rate of reduction in the linear speed of the vehicle induced by the application of the service brake, the road loads, and the non-friction torque from the electric machine.
Sample 1Sample 2Sample 3

Examples of Deceleration rate in a sentence

  • On brake- equipped systems, disabling the amplifier by a hardware or software command starts the following sequence of events.• The motor begins to decelerate (at Abort Deceleration rate in position mode or Fast Stop Ramp rate in velocity mode).

  • For the site access, the criteria used for calculating the ‘y’ distances are: • Speed: 85%ile observed speeds; • Driver reaction time: 2 seconds; and • Deceleration rate: 0.25g.

  • Deceleration rate: Maintain a constant deceleration rate of 3.0 m/s 2 (9.9 fps 2).

  • Immediately after completion ofthe second hot performance stop, drive 1.5 km (0.93 mi) at 50 km/h (31.1 mph) before the first cooling stop.* * * * * S7.15.3. * * *(d) Deceleration rate: Maintain aconstant deceleration rate of 3.0 m/s 2(9.8 fps2).* * * * * S7.16.3. * * *(c) Pedal force: The average pedal force shall not be greater than theaverage pedal force recorded during the shortest GVWR cold effectiveness stop.* * * * *Issued on July 18, 1995.

  • TRITONE can also provide the safety performance measures such as Deceleration rate to avoid a crash, Time to Collision, Crash Potential Index, Post Encroachment Time, Proportion of stopping distance.

  • Deceleration rate on the runway is approximately three times greater than in the air.Height of the airplane over the runway threshold also has a significant effect on total landing distance.

  • The formula used in this work to calculate SSD is also used by AASTHO (2004) and DER-SP (2006) in which𝑆𝑆𝐷 = 0,278 × 𝑉 × 𝑡 + 𝑉29,81254×(()+𝑖)(2)where: SSD: Stopping Sight Distance (m),𝑉: Velocity (km/h),𝑡: Perception and reaction time (s),𝑎: Deceleration rate (m/s2), and𝑖: Longitudinal slope of the road (%).

  • This scripting language was used in the HyperDrive to collect the different types of dynamic data: Deceleration rate, Time to collision to pedestrian, distance to the nearest pedestrian.CHAPTER 4: EXPERIMENTAL DESIGN This chapter is to present the design of the proposed study.

  • The recent improvements NN and other paradigms are to be brought to implementable stage in environmental data analysis.

  • Deceleration rate limits shall not apply to movement into battle positions or short halts.[8695]Ownvehicle steady state turn rate shall be 175 +/-5 percent mils/second for all ownvehicle speeds.

Related to Deceleration rate

  • Reset Reference Rate means in respect of a Reset Period, the gross redemption yield (as calculated by the Agent Bank on the basis set out by the United Kingdom Debt Management Office in the paper “Formulae for Calculating Gilt Prices from Yields”, page 5, Section One: Price/Yield Formulae “Conventional Gilts”; Double dated and Undated Gilts with Assumed (or Actual) Redemption on a Quasi-Coupon Date (published 8 June 1998, as amended or updated from time to time) or if such basis is no longer in customary market usage at such time, in accordance with generally accepted market practice at such time, on a semi-annual compounding basis (rounded up (if necessary) to four decimal places) of the Benchmark Gilt in respect of that Reset Period, with the price of the Benchmark Gilt for the purpose of determining the gross redemption yield being the arithmetic average (rounded up (if necessary) to the nearest 0.001 per cent. (0.0005 per cent. being rounded upwards)) of the bid and offered prices of such Benchmark Gilt quoted by the Reset Reference Banks at 11.00 a.m. (London time) on the Reset Determination Date in respect of such Reset Period on a dealing basis for settlement on the next following dealing day in London. Such quotations shall be obtained by or on behalf of the Issuer and provided to the Agent Bank. If at least four quotations are provided, the Reset Reference Rate will be determined by reference to the rounded arithmetic mean of the quotations provided, eliminating the highest quotation (or, in the event of equality, one of the highest) and the lowest quotation (or, in the event of equality, one of the lowest). If only two or three quotations are provided, the Reset Reference Rate will be determined by reference to the rounded arithmetic mean of the quotations provided. If only one quotation is provided, the Reset Reference Rate will be determined by reference to the rounded quotation provided. If no quotations are provided, the Reset Reference Rate will be the previous Reset Reference Rate or (in the case of the first Reset Period) 1.581 per cent., where:

  • Compounded Daily SOFR means, in relation to a Floating Rate Interest Period, the rate of return of a daily compound interest investment (with SOFR as reference rate for the calculation of interest) during the related Observation Period and will be calculated by the Calculation Agent on the related Interest Determination Date as follows: Where:

  • Treasury Rate means, with respect to any redemption date, the rate per annum equal to the semi-annual equivalent yield to maturity of the Comparable Treasury Issue, assuming a price for the Comparable Treasury Issue (expressed as a percentage of its principal amount) equal to the Comparable Treasury Price for such redemption date.

  • Compounded Daily XXXXX means, in relation to an Interest Period, the rate of return of a daily compound interest investment (with the daily Sterling overnight reference rate as reference rate for the calculation of interest) and will be calculated by the Fiscal Agent or the Calculation Agent, as applicable, as follows, and the resulting percentage will be rounded, if necessary, to the fifth decimal place, with 0.000005 being rounded upwards: Where: