CUBIC FOOT OF definition

CUBIC FOOT OF. GAS" is the unit of volume for purposes of measurement hereunder, except for gross heating value, and means one cubic foot of gas at a temperature of 60 DEG. F. and at a pressure of 14.73 pounds per square inch absolute. For purposes of measurement, the atmospheric pressure shall be assumed to remain constant at 13 pounds per square inch absolute.
Sample 1Sample 2
CUBIC FOOT OF. “ means the volume of gas contained in one cubic foot of space at a standard pressure base of 14.73 pounds per square inch absolute and a standard temperature base of sixty degrees Fahrenheit (60°F).
Sample 1

Examples of CUBIC FOOT OF in a sentence

  • CUBIC FOOT OF GAS shall mean that amount of gaseous hydrocarbons contained in a cubic foot of space at a base temperature of 60 degrees Fahrenheit and an absolute pressure of 14.65 lbs.

  • CUBIC FOOT OF GAS (standard) - The amount of gas which would occupy one cubic foot when at a temperature of 60 degrees Fahrenheit, saturated with water vapor and under a pressure equivalent to that of 30 inches of mercury.

  • This sector’s employment multiplier shows that it can create an additional 2,032 jobs for every 1 billion of investments.

  • THE AGGREGATE INPUT RATING OF ALL UNVENTED APPLIANCES INSTALLED IN A ROOM OR SPACE MAY NOT EXCEED 20 BTU PER HOUR PER CUBIC FOOT OF VOLUME OF THE ROOM OR SPACE.

  • BASIC FORMULA = 1 CUBIC FOOT OF NITROGEN PER CASE Nitrogen Xxxxx Ni160-LT350 = 3478 cubic feet of nitrogen when full.

  • OF ACQ PER CUBIC FOOT OF WOOD, AND EACH PIECE SHALL BEAR THE THIRD PARTY QUALITY MARK, "GROUND CONTACT USE".

  • INSULATION AND OUTER PROTECTIVE JACKET INSULATION SHALL BE MINIMUM THREE AND ONE-HALF (3-1/2") FOR 12.75" O.D. STEEL PIPE AND MINIMUM THREE INCHES (3") FOR 16" O.D. STEEL PIPE OF A MINIMUM DENSITY OF 2 POUNDS PER CUBIC FOOT OF POLYURETHANE FOAM FACTORY APPLIED TO COMPLETELY FILL THE SPACE BETWEEN THE PIPE AND THE OUTER WEATHERPROOF JACKET.

  • OF ACQ PER CUBIC FOOT OF WOOD, AND EACH PIECE SHALL BEAR THE THIRD PARTY QUALITY MARK, "ABOVE GRADE USE".

  • The term "critical notice" shall mean a notice, in accordance with NAESB Standards, which pertains to informationon Pipeline conditions that affect scheduling or adversely affect scheduled Gas flow.1.8 CUBIC FOOT OF GAS.

Related to CUBIC FOOT OF

  • Cubic Foot means a volume of Gas occupying a space of one cubic foot at a temperature of 60°F and at the applicable Base Pressure.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Psig means pounds per square inch gauge.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Psia means pounds per square inch absolute.

  • Net weight means the weight of the goods themselves without packing materials and packing containers of any kind;

  • Cubic Metre means the volume of gas which occupies one cubic metre when such gas is at a temperature of 15 degrees Celsius, and at a pressure of 101.325 kilopascals absolute;

  • Gallon means a United States gallon of two hundred thirty-one cubic inches of liquid at 60º Fahrenheit, and at the equivalent vapor pressure of the liquid.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • MSCF means one thousand standard cubic feet.

  • Total Floor Area means, the sum total of the total areas of all floors in a building or structure whether at above or below grade measured between the exterior faces of the exterior walls of the building or structure or from the centre line of a common wall separating two uses or from the outside edge of a floor where the outside edge of the floor does not meet an exterior or common wall, and;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • MMcf means one million cubic feet.

  • Gross weight means the aggregate weight of a vehicle or combination of vehicles and the load

  • Vapor tight means equipment that allows no loss of vapors. Compliance with vapor-tight requirements can be determined by checking to ensure that the concentration at a potential leak source is not equal to or greater than 100 percent of the lower explosive limit (LEL) when measured with a combustible gas detector, calibrated with propane, at a distance of 1 inch (2.54 cm) from the source.

  • Density means the permitted number of dwelling units per

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • PVC means Price variation clause

  • Ton means a ton of two thousand two hundred and forty (2,240) lbs. net dry weight;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.