Contract-Related Capacity definition

Contract-Related Capacity means the design capacity of the Facility to be used to generate the Contract Amount, as set forth on Exhibit 3.
Sample 1Sample 2Sample 3

Examples of Contract-Related Capacity in a sentence

  • In the event that Seller determines that the Facility shall be incapable of providing the Contract Amount upon Commercial Operation, Seller may request that COMPANY agree to a downsizing of the Facility under which the Facility would provide a lesser amount of AECs. COMPANY shall review any downsizing request and, in COMPANY’s sole discretion and subject to Section 6.1, may approve a downsizing of the Facility and a revised Contract Amount and Contract-Related Capacity.

  • Seller shall give prompt written notice to COMPANY of any material modifications to the Facility after the Effective Date and a brief description of the reasons for the modifications and confirmation that such modifications shall not affect the general location of the Facility or the Contract Amount, except that Seller may modify or revise the Contract Amount and Contract-Related Capacity in accordance with Section 4.5.

  • In the event that Seller determines that the Facility shall be incapable of providing the Contract Amount upon Commercial Operation, Seller may request that PECO agree to a downsizing of the Facility under which the Facility would provide a lesser amount of AECs. PECO shall review any downsizing request and, in PECO’s sole discretion and subject to Section 6.1, may approve a downsizing of the Facility and a revised Contract Amount and Contract-Related Capacity.

  • In the event that Seller determines that the Facility shall be incapable of providing the Contract Amount upon Commercial Operation, Seller may request that PECO agree to a downsizing of the Facility under which the Facility would provide a lesser amount of AECs. PECO shall review any downsizing request and, in XXXX’s sole discretion and subject to Section 6.1, may approve a downsizing of the Facility and a revised Contract Amount and Contract-Related Capacity.

Related to Contract-Related Capacity

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8. Financial Close:

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Daily Unforced Capacity Obligation means the capacity obligation of a Load Serving Entity during the Delivery Year, determined in accordance with Reliability Assurance Agreement, Schedule 8, or, as to an FRR entity, in Reliability Assurance Agreement, Schedule 8.1. Day-ahead Congestion Price: “Day-ahead Congestion Price” shall mean the Congestion Price resulting from the Day-ahead Energy Market. Day-ahead Energy Market:

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.