CIVIL CONSTRUCTION WORK Sample Clauses

CIVIL CONSTRUCTION WORK. The civil construction work may comprise variety of works such as dredging, reclamation, construction of breakwaters, berths, development of back-up area for storage of cargo/containers, approach roads, railways sidings, operational buildings/offices, maintenance workshop, drainage, water supply, environmental protection works and other amenities. The Concessionaire is required to undertake all tests required as per IS/ ISO/IEC standards to ensure that the construction work carried out by him meets not only the functional requirements of the project but also conforms to the required quality as per the standards. In addition, the Concessionaire shall also comply with the provisions of specifications published by the Indian Road Congress, RDSO of Ministry of Railways and provisions of Shore Protection Manual (CERC) of US Army Corps of Engineers, as may be pertinent to the Project. In respect of implementing the Project, the Concessionaire shall refer to and as relevant comply with the design and construction standards specified in the following paragraphs. Indian Standards for Construction of Ports and Harbours IS 4651 – Part – 1 – 1974 Code of practice for planning and design of ports and harbours: Part 1 Site investigation IS 4651–Part 2–1989 Code of practice for planning and design of ports and harbours Part 2 Earth pressure IS 4651-Part III-1974 Code of practice for planning and design of ports and harbours: Part III: Loading IS 4651- Part 4 -1989 Code of practice for planning and design of ports and harbours: Part 4: General Design consideration. IS 4651-Part 5-1980: Code of practice for planning and design of ports and harbours Part:5 Layout and functional requirements IS7314: 1974 Glossary of terms relating to port and harbour engineering IS 9527: Part 1: 1981 Code of practice for design and construction of port and harbour structures: Part 1 Concrete monoliths IS 9527: Part 3:: 1983 Code of practice for design and construction of port and harbour structure: Part 3 Sheet pile walls IS 9527: Part 4: 1980 Code of practice for design and construction of port and harbour structure: Part 4 Cellular Sheet pile structures IS 9527: Part 6: 1989 Code of practice for design and construction of port and harbour structures: Part 6 Block work IS 10020: Part 4: 1981 Recommendations for design and construction of port and harbour components Part 4 Slipways. IS 9556: 1980 Code of Practice for design and construction of diaphragm walls Indian Standards for Foundation ...
Sample 1
AutoNDA by SimpleDocs
CIVIL CONSTRUCTION WORK. Civil construction work is understood to be the modality of hiring manpower to be used to carry out the services or execute the construction, demolition, or remodeling tasks as per PO.01.03.001. (Contracting Providers - Civil Construction).
Sample 1

Related to CIVIL CONSTRUCTION WORK

  • Contract Construction 6.27.1 The parties acknowledge that each party and its counsel have reviewed this CONTRACT and that the normal rule of construction to the effect that any ambiguities are to be resolved against the drafting party shall not be employed in the interpretation of this CONTRACT or any amendment or exhibits hereto.

  • Neutral Construction The parties to this Agreement agree that this Agreement was negotiated fairly between them at arm's length and that the final terms of this Agreement are the product of the parties' negotiations. Each party represents and warrants that it has sought and received legal counsel of its own choosing with regard to the contents of this Agreement and the rights and obligations affected hereby. The parties agree that this Agreement shall be deemed to have been jointly and equally drafting by them, and that the provisions of this Agreement therefore should not be construed against a party or parties on the grounds that such party or parties drafted or was more responsible for the drafting of any such provision(s).

  • Legal Construction If one or more of the provisions contained in this Agreement shall for any reason be held invalid, illegal, or unenforceable in any respect, such invalidity, illegality, or unenforceability shall not affect any other provisions and this Agreement shall be construed as if it did not contain the invalid, illegal, or unenforceable provision.

  • General Construction 20.2.1. Binding Nature.............................................. 20.2.2. Entire Agreement............................................ 20.2.3. Governing Law............................................... 20.2.4. Indulgences Not Waivers..................................... 20.2.5. Titles Not to Affect Interpretation......................... 20.2.6.

  • Law; Construction This Agreement and any claim, counterclaim or dispute of any kind or nature whatsoever arising out of or in any way relating to this Agreement (“Claim”), directly or indirectly, shall be governed by, and construed in accordance with, the internal laws of the State of New York.

  • Project Construction The Contractor agrees to provide continuous on-site supervision on each Job Order, while progress on the project is being accomplished. The Contractor’s Project Manager will ensure:

  • Commencement and Completion of Construction The Company shall begin Construction Activities no later than January 1, 2014 (“Commencement Date”) and secure a final Certificate of Compliance by August 27, 2015 (hereinafter, “Completion Date”).

  • Pre-Construction Phase Employer’s Liability, Workers’ Compensation, Comprehensive General Liability and Comprehensive Automobile Liability in the amounts as set forth in the UGSC.

  • DAF Construction The DAF shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Developer and Connecting Transmission Owner agree on another mutually acceptable deadline, the Developer shall deliver to the Connecting Transmission Owner and NYISO “as- built” drawings, information and documents for the DAF, such as: a one-line diagram, a site plan showing the Large Generating Facility and the DAF, plan and elevation drawings showing the layout of the DAF, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Developer’s step-up transformers, the facilities connecting the Large Generating Facility to the step-up transformers and the DAF, and the impedances (determined by factory tests) for the associated step-up transformers and the Large Generating Facility. The Developer shall provide to, and coordinate with, Connecting Transmission Owner and NYISO with respect to proposed specifications for the excitation system, automatic voltage regulator, Large Generating Facility control and protection settings, transformer tap settings, and communications, if applicable.

  • PRE-CONSTRUCTION PHASE SERVICES The Pre-Construction Phase shall be deemed to commence upon the date specified in a written Notice to Proceed with Pre-Construction Phase Services issued by Owner and shall continue through completion of the Construction Documents and procurement of all major Subcontractor agreements. Contractor is not entitled to reimbursement for any costs incurred for Pre-Construction Phase Services performed before issuance of the written Notice to Proceed. Pre-Construction Phase Services may overlap Construction Phase Services. Contractor shall perform the following Pre-Construction Phase Services:

Time is Money Join Law Insider Premium to draft better contracts faster.