Check Meter definition

Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.
Check Meter means the Buyer revenue-quality meter section or meter(s), which Buyer may require at its discretion, as set forth in Section 3.08(b) and will include those devices normally supplied by Buyer or Seller under the applicable utility Electric Service Requirements.
Check Meter means a meter, which shall be connected to the same core of the Current Transformer (CT) and Voltage Transformer (VT) to which main meter is connected and shall be used for accounting and billing of electricity in case of failure of main meter;

Examples of Check Meter in a sentence

  • Check Meter CTs can be used for other purposes provided that such Check Meter CTs comply with the accuracy requirements in paragraph 2.2 of these TSRs.

  • The Generator must carry out a Proving Test on both the Main Meter and the Check Meter following a change to any of the Key Meter Technical Details (set out in paragraph 6.3(B) above).

  • Where a Main Meter or Check Meter has failed either a Subsequent Metering Calibration Test or a Subsequent Metering Calibration Re-Test, the Generator must promptly replace that Main Meter or Check Meter in accordance with paragraph 9 of this MOF.


More Definitions of Check Meter

Check Meter means the SCE revenue-quality meter section or meter, which SCE may require at its discretion, as set forth in Section 3.08(b), and which will include those devices normally supplied by SCE or Seller under the applicable utility electric service requirements.
Check Meter means Import and Export Meter for performing a check on the accuracy of the Bill Meter.
Check Meter means a meter connected to the same core of the Current Transformer (CT) and Voltage Transformer (VT) to which main meter is connected;
Check Meter means a redundant revenue quality meter which is identical to and of equal accuracy to the primary revenue quality meter connected at the same metering point which must be certified in accordance with the ISO Tariff and this Protocol.
Check Meter means the Meter that the Generator is required to calibrate, install, commission and maintain pursuant to and in accordance with the MOF and the TSRs in respect of each Main Meter to measure Metered Volume (excluding, where the Facility is a Dual Scheme Facility, the Imported Input Electricity);
Check Meter means any subsidiary device used to verify the readings taken by a meter;
Check Meter means a meter or other composite measurement device which is used by a master meter operator and which is used to determine gas consumption by end-users served by the master meter operator.