DEVIATION ORDER means any order given by the Engineer-in-Charge to effect an alteration, addition or deduction, which does not radically affect the scope and nature of the contract.
Medication order means a written or verbal order from a
Suspension Order means a notice issued by OCCL directing a licensee to stop providing child care as of a specific date. While the license is suspended, a licensee may not provide child care.
Variation Order means any written order, identified as such issued to the Contractor by the Employer under Sub Clause 31.1.
Corporation Order mean, respectively, the written request or order signed in the name of the Corporation by its Chairman of the Board of Directors, its Vice Chairman of the Board of Directors, its President or a Vice President, and by its Treasurer, an Assistant Treasurer, its Secretary or an Assistant Secretary, and delivered to the Trustee.
Prescription order means any of the following:
confiscation order means an order made under—
adoption order (“gorchymyn mabwysiadu”) means an adoption order within the meaning of section 72(1) of the Adoption Act 1976 or section 46(1) of the Adoption and Children Act 2002;
Sanction Order means the Court Order to be sought by the Participating CCAA Parties from the Court as contemplated under the Plan which, inter alia, approves and sanctions the Plan and the transactions contemplated thereunder, pursuant to section 6(1) of the CCAA, substantially in the form of Schedule “E” or otherwise in form and content acceptable to the Participating CCAA Parties, the Monitor and the Parent, in each case, acting reasonably;
Administration Order means the order of the Court dated 27 September 2020 placing inter alia the Group DOCA Companies into ADGM administration;
protection order means an order made in terms of section 18;
Subscription Order means a request from an Authorised Participant delivered to the Issuer to issue ETP Securities.
Interim Compensation Order means the Order Establishing Procedures for Interim Compensation and Reimbursement of Expenses for Professionals [D.I. 2066].
Confirmation Order means the order of the Bankruptcy Court confirming the Plan pursuant to section 1129 of the Bankruptcy Code.
Redemption Order means a Redemption Order in the form attached to the LS Operating Procedures Agreement, or such other form as may be acceptable to the Issuer in its sole discretion.
Redemption Order Date shall have the meaning assigned thereto in Section 7.1(b).
Written Order means a written order signed by the General Manager or properly authorized representative or agent, mailed to the Contractor at the address designated in the firm's Bid, or to such other address as may be designated in writing as its official place of business.
Authentication Order has the meaning specified in Section 2.01 hereof.
Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].
Pressure demand respirator means a positive pressure atmosphere-supplying respirator that admits breathing air to the facepiece when the positive pressure is reduced inside the facepiece by inhalation.
Class Distribution Order means an order entered by the Court authorizing and directing that the Net Settlement Fund be distributed, in whole or in part, to Authorized Claimants.
Stop Work Order means the written Notice, delivered in accordance with this Agreement, by which the State may require the Contractor to stop all, or any part, of the Work of this Agreement, for the period set forth in the Stop Work Order. The Stop Work Order shall be specifically identified as such and shall indicate that it is issued pursuant to the Stop Work provision in this Exhibit B.
Batch Load Demand Resource means a Demand Resource that has a cyclical production process such that at most times during the process it is consuming energy, but at consistent regular intervals, ordinarily for periods of less than ten minutes, it reduces its consumption of energy for its production processes to minimal or zero megawatts.
Partnership Order means, respectively, a written request or order signed in the name of the Partnership by the Chairman of the Board, the President or a Vice President of the General Partner, and by the Treasurer, an Assistant Treasurer, the Controller, an Assistant Controller, the Secretary or an Assistant Secretary of the General Partner, and delivered to the Trustee, or if the Partnership shall change its form of entity to other than a limited partnership, by Persons or officers, members, agents and others holding positions comparable to those of the foregoing nature, as applicable.
Gasoline dispensing facility means any site where gasoline is dispensed to motor vehicle gasoline tanks from stationary storage tanks.
Logging supervisor means the individual who provides personal supervision of the utilization of sources of radiation at the well site.