Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.
Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;
Calibration gas means a gas mixture used to calibrate gas analysers.
Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).
Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.
Net metering system means a facility for the production of electrical energy that does all of the following:
smart metering system means an electronic system that can measure energy consumption, providing more information than a conventional meter, and can transmit and receive data for information, monitoring and control purposes, using a form of electronic communication;
Meters shall have the meaning set forth in Section 4.6(a) hereof.
Metering System means the meters and other applicable devices/instruments installed and used for measurement of Electricity, delivered from the Electricity generated by Units comprising the Facility, as per the specifications provided in Schedule C and shall comprise of the Main Meter and the Back Up Meter;
Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;
Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.
technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;
Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.
Attachment point means a point on the network at which network assets are connected to assets owned by another person.
medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;
Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.
Saturated zone or "zone of saturation" means that part of the earth's crust in which all voids are filled with water.
Destination Point means the delivery point(s) on Carrier’s System where Product is delivered to Shipper, as such points are specified in Section III of this tariff.
Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.
Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.
Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.
Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.
Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.
Meter means, unless otherwise qualified, a device that measures and registers the integral of an electrical quantity with respect to time.
Delivery System means the design and construction
Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.