Bulk density definition

Bulk density means the weight of solids, air and water per unit volume. Bulk density is expressed in kilograms per cubic metre (kg/m3), in general. The void spaces in the cargo may be filled with air and water.
Sample 1Sample 2Sample 3
Bulk density means the mass of a unit volume of powder, usually expressed in grams per cubic centimetre (g/cm3) or kilograms per cubic metre (kg/m3). It is determined by a specific method. Apparent density is an alternative, but less commonly used, term for bulk density. (See also density).
Sample 1Sample 2
Bulk density means dry weight per unit of volume.
Sample 1Sample 2

Examples of Bulk density in a sentence

  • Land EnvironmentSoil Texture pH ElectricalConductivity Bulk density PorosityTotal organic carbon N, P, K, Zinc, Cd Chloride, Alkali metal, permeability, Water holding capacity, Cu,Iron as Fe, Moisture8 sample from project sit as well as nearby agriculture land.(soil samples has been collected as per BIS specifications)Season wiseCollected and analyzed as per soil analysis reference book, M.I. Jackson and soil analysis reference book byC.A. BlackOnce in a year.

  • Aggregates: Classification – Particle shape & texture – Bond, strength & other mechanical properties – Specific gravity, Bulk density, porosity, adsorption & moisture content – Bulking of sand –Deleterious substance – Soundness – Alkali aggregate reaction – Thermal properties – Sieve analysis – Fineness modulus – Grading curves – Grading of fine & coarse Aggregates – Gap graded and well graded aggregate as per relevant IS code – Maximum aggregate size.

  • Void ratio, Porosity, Bulk density, Moisture content, Degree of saturation, Liquid limit, Plastic limit, etc.

  • Bulk density is expressed in kilograms per cubic metre (kg/m3), in general.

  • When a cargo is dangerous goods as defined in the IMDG Code, as defined in regulation VII/1.1 of the SOLAS Convention, refer to 4.1.1. Bulk density means the weight of solids, air and water per unit volume.

  • Bulk density assigned on a block per block basis using the correlation between measured density values and base metal grade5.

  • Bulk density results by marsh type, marsh location, and core depth 30Table 9.

  • Bulk density was 3.1 t/m3 for Vein 1 and 2 and 2.8 t/m3 for Main Below Dike and Lower Deep veins.

  • Bulk density of asteroid 243 Ida from the orbit of its satellite Dactyl.

  • Bulk density was not significantly different averaged across the six sites where we were able to measure it in A horizons, but it was lower at three in the annual grass A horizons, higher in one, and equal to sagebrush A horizons at two of the sites.

Related to Bulk density

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Bulk plant means a motor fuel storage and distribution facility that is not a terminal and from

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Density means the permitted number of dwelling units per

  • bulk cargo means any quantity of alumina or the usual bulk materials used in an alumina industry and being bauxite or alumina for shipment or materials consigned for use by the Company or by any subsidiary Company or by any associated Company in connection with its operations in that industry;

  • High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).

  • Bulk means material that is stored or transported in a loose, unpackaged liquid, powder, or granular form capable of being conveyed by a pipe, bucket, chute, or belt system.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Bulk carrier means a ship which is intended primarily to carry dry cargo in bulk, including such types as ore carriers as defined in SOLAS chapter XII, regulation 1, but excluding combination carriers.

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Bulk drug substance means any substance that is represented for use, and that, when used in the

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Fabrication means making up data or results and recording or reporting them.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Biomass means the biodegradable fraction of products, waste and residues from biological origin from agriculture (including vegetal and animal substances), forestry and related industries including fisheries and aquaculture, as well as the biodegradable fraction of industrial and municipal waste;

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.

  • Hot Weather Alert means the notice provided by PJM to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for extreme hot and/or humid weather conditions which may cause capacity requirements and/or unit unavailability to be substantially higher than forecast are expected to persist for an extended period. IDR Transfer Agreement:

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Cannabis plant means any plant of the genus Cannabis;

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Scale means the height, width and length of each building proposed within the development in relation to its surroundings;

  • Geothermal fluid means water in any form at temperatures greater than 120