Building Dimensions definition

Building Dimensions. Building dimensions are approximately 90' deep x 402' wide. TYPE OF BUILDING: Building is a four (4) story, conventional steel frame, with a combination of architectural brick, glass, Exterior Insulation Finish System skin and/or precast. The roof will be a ballasted membrane roof. The final design and color template will be mutually acceptable. SITEWORK CONSTRUCTION ASSUMPTIONS:
View Source
Building Dimensions. 200' x 490' Clear Height: 24' min. (except 29' min. over call area). Bay Spacing 40' x 50' minimum General Design and - In accordance with all applicable codes and Accessibility ordinances. Accessibility shall meet Title 24 (California) and ADA Standards (Federal) without regard to tenant's specific use. Site Work Trucking and - Shall be concrete or asphalt. Design to a Access Roads truck index of 6.0 or higher, which shall accommodate heavy truck loads and have a minimum life expectancy of 15 years. Concrete Apron - 60' wide x 6" minimum thickness with minimum #4 reinforcement bars at 18" minimum on center each way over sub base section per soils engineer recommendation. Grade at dock high truck doors not to exceed 3%. Signing - One monument or building sign to be reasonably approved by tenant. Drainage - Design to provide gravity flow drainage off of site.
View Source

Examples of Building Dimensions in a sentence

  • Building Dimensions - The applicant has requested a variation to exceed the maximum building dimension of 64 metres established in the LUB for the Centre-2 Zone.

  • Address ▇▇▇ ▇▇▇▇ ▇▇▇▇▇ ▇▇▇▇▇▇, ▇▇▇ ▇▇▇▇, ▇▇ ▇▇▇▇▇ Location North side of West 128th Street between Lenox Avenue (▇▇▇▇▇▇▇ ▇ Boulevard) and ▇▇▇▇ ▇▇▇▇▇▇▇ ▇▇▇▇▇▇ ▇▇ Boulevard (Seventh Avenue) Block & Lot 1913/25 Lot SF ± 2,498 Lot Size 25' x 99.92' Total Building SF ± 6,000 Building Dimensions 25' x 60' Description Four-story plus lower-level, walk-up apartment building with a fenced-in and landscaped rear yard.

  • Specifically, the Floor Area, Building Dimensions, Streetwall Stepback, Tower Side Yard Setback, and Balcony variations are provided to ensure a built form that permits the density allowed for the site (which is established under Policies F-11(d), F-11(l), and Map 13); ▇▇▇ ▇▇▇▇▇▇▇ Park Setback variation is to ensure Policy F-11(d)(iv) is met, which requires appropriate setbacks from Martins Park.