BTUH definition

BTUH means British Thermal Unit per hour of heat;
View Source
BTUH means British thermal units per hour.
View Source
BTUH means BTUH/per Sq. Ft. of Store Floor Area and shall be the calculated peak design total heat gain as determined in accordance with ASHRAE procedures. Tenant's outdoor air or exhaust that is derived via the Landlord's system, and total heat gain from the roof, lights, fan motors and other items, shall be included in calculating the BTUH/per Sq. Ft. factor of this section for purposes of determining the capacity multiplier. The peak total heat gain shall be calculated using the same sun time hour as is used by Landlord in determining the peak building heat gain. (Typically 1600 hours).
View Source

Examples of BTUH in a sentence

  • Heat load requiring dissipation: 750‐10,000 BTU/H per cabinet (assume three cabinets per room).

  • Heavy Commercial is defined as (I) commercial refrigeration equipment greater than 25 tons; or, (II) commercial HVAC equipment greater than 25 tons, 75 HP, 1000 LBS, 10000 CFM, 300000 BTU/H, 300 KBH, 500 Gallons, or 95 kW.

  • The design internal heat load per station is: 1,200 BTUH - PC equipment per station; 300 BTUH sensible, people; heat load from lights per actual locations; external heat loads per actual locations.

  • CUSTOMER NAME: CUSTOMER SERVICE ADDRESS: Please describe the secondary heating system installed at this address including the type of heat, the efficiency rating, and the rated British Thermal Units per hour (BTUH).

  • Mechanical Plans Show HVAC system layout Show fire damper and fire/smoke damper locations, location of fuel-fired equipment, including type and size of flues, BTUH input, gas pipe sizes Provide kitchen exhaust hood size/fire protection, smoke control systems, as applicable  Q.

  • Each unit shall be FH248C, 120,000 BTUH sensible @ 72 degrees db, 45% RH room.

  • Residential systems must meet or exceed the following efficiency requirements and must be within the following capacity requirements: ▪ A/C systems: minimum 15 SEER/12 EER, up to 64,999 BTUH ▪ Heat pump systems: minimum 15 SEER/12 EER/8.5 HSPF, up to 64,999 BTUH The following additional requirements must also be met: ▪ All systems must be AHRI-matched, as evidenced by the appropriate AHRI rating.

  • R+D lab BTUH output is 18,600 AC Zone 2: cGMP and R+D Shipping and Storage (might only be possible if these two are adjacent) cGMP S+S BTUH output is 37,360 R+D S+S BTUH output is 6,520 cGMP and R+D lab: Consider wired connection for data entry stations for more reliable database access.

  • CXR- clinical grounds only Echocardiogram - Presence of a murmur may require an echo (e.g. clinically severe AS), but this is unlikely to happen preoperatively at BTUH and should not delay surgery.

  • Mechanical Plans Show HVAC system layout Show fire damper and fire/smoke damper locations, location of fuel-fired equipment, including type and size of flues, BTUH input, gas pipe sizes Provide kitchen exhaust hood size/fire protection, smoke control systems, as applicable ❑ Q.


More Definitions of BTUH

BTUH means British thermal unit per hour.
View Source