Boiler installation definition

Boiler installation means the installation of a boiler, including all connected piping, valves, fittings, flanges, firing equipment, controls, appurtenances, and auxiliaries. The term includes the field assembly of boilers.

Examples of Boiler installation in a sentence

  • We will contact You on the anniversary of the Boiler installation.

  • Before Boiler installation, examine roughing-in for concrete equipment bases, anchor-bolt sizes and locations.

  • Boiler installation When handling and storing of the product you must be careful to avoid any breaches of boiler.

  • Boiler installation shall be accomplished within acceptable A.S.M.E. piping practices and requirements and in strict accordance with the boiler manufacturer’s recommenda- tions and instructions.

  • Boiler installation in the test room shall be in accordance with the setup and apparatus requirements of section 6 of appendix N to subpart B of 10 CFR part 430.(B) Establishing flow rate andtemperature rise.

  • Boiler installation in the test room shall be in accordance with the setup and apparatus requirements of section 6 of appendix N to subpart B of 10 CFR part 430.

  • The main parts of each combustion plant line will be constructed in the following order: • Boiler installation; • Scrubber installation; • Bag filter installation; • Flue gas installation; • Furnace installation; • Piping installation; and • Wiring and insulation installation.

  • Boiler installation includes connection to the hydraulic system, exhaust system, and the performance of all low-voltage electrical connections (sensors, thermostats) and high-voltage electrical connections (pumps, four-way valve actuator), filling of the heating system with the heating agent, deaereation of heat receivers, pumps, and distributors.

  • Boiler installation in the test room shall be in accordance with the setup and apparatus requirements by section 6.0 of appendix N to subpart B of 10 CFR part 430.(B) Activation of controls.

  • Boiler installation must conform to Commonwealth of Massachusetts code 248 CMR which includes but is not limited to:• Installation by licensed plumber or gas fitter.

Related to Boiler installation

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • Customer’s Installation means an Electrical Installation and includes Distributed Generation, if Distributed Generation is connected to a Customer's Installation; "Customer’s Premises" means the land and buildings owned or occupied by a Customer, and any land over which the Customer has an easement or right to pass electricity, including:

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • electrical installation means an electrical installation as defined in the Regulations;

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Installation Site means the site at which the Product is originally installed.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Removable Installations means any items listed on Exhibit F attached hereto and any items agreed by Landlord in writing to be included on Exhibit F in the future, (y) “Tenant’s Property” means Removable Installations and, other than Installations, any personal property or equipment of Tenant that may be removed without material damage to the Premises, and (z) “Installations” means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • offshore installation means any installation which is intended for underwater exploitation of mineral resources or exploration with a view to such exploitation;

  • Installation Works means, as the context so requires,

  • Building Equipment shall have the meaning set forth in the Security Instrument.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.