Baseline risk assessment definition

Baseline risk assessment means the portion of a risk assessment which addresses the potential adverse human health and environmental effects under both current and planned future conditions caused by the presence of a contaminant in the absence of any control, remediation, or mitigation measures.
Sample 1Sample 2Sample 3
Baseline risk assessment means a document to assess whether the ground water plume
Sample 1
Baseline risk assessment means a document to assess whether the ground water plume at a mill site and vicinity site(s) have the potential to adversely affect public health or the environment.
Sample 1

Examples of Baseline risk assessment in a sentence

  • Baseline risk assessment was conducted and is attached as Appendix I.

  • Regulation 4- Baseline risk assessment for an intended construction work, Construction Regulation 5(1)(a)- H&S Specification, Construction.

  • Baseline risk assessment, which is specific and incorporates the working at height risk assessment, as well as the site-specific risk assessment, has been completed for the work to be conducted.

  • The SBOM is a compilation of instructions, operational and stability limitations, procedures, regulations, and guidelines derived from the particulars of each small boat, the Baseline risk assessment, and the Mission Based risk assessment.

  • Baseline risk assessment for both human health and the environment is summarized in section 7.

  • Operational Management of Escalation Baseline risk assessment should have been undertaken between care home providers and the County’s Commissioning team for each care home (core provider performance practice) Nursing and residential care home managers will contact the County’s Commissioning team to update their risk assessment when there is a change (i.e. 2 or more residents presenting with COVID-19 symptoms; more than 10% reduction in staff availability).

  • Baseline risk assessment must be developed following a new propulsion hazard or safety risk surfacing, depending on the seriousness of the new hazard or risk as described in this publication.

  • Listed below are key elements of our program and graduate school policies & procedures that are in place at Bowie State University.

  • Each DISCOM shall maintain mechanisms put in place under previous or ongoing ADB projects with adequate resources to collect and analyze energy and demand data.

  • T2.2-08 Evaluation Schedule - Health and Safety ManagementTenderers to submit required documents or required information to ensure SHE compliance in terms of scope of work – Critical Elements numbers 1, 2 and 3 Baseline risk assessment which as a minimum includes these critical elements:1.

Related to Baseline risk assessment

  • Risk assessment means a programme to determine any risk associated with any hazard at a construction site, in order to identify the steps needed to be taken to remove, reduce or control such hazard;

  • Phase I assessment as described in, and meeting the criteria of, (i) Chapter 5 of the FNMA Multifamily Guide or any successor provisions covering the same subject matter in the case of a Specially Serviced Mortgage Loan as to which the related Mortgaged Property is multifamily property or (ii) the American Society for Testing and Materials in the case of Specially Serviced Mortgage Loan as to which the related Mortgaged Property is not multifamily property.

  • Comprehensive assessment means the gathering of relevant social, psychological, medical and level of care information by the case manager and is used as a basis for the development of the consumer service plan.

  • Environmental and Social Impact Assessment or “ESIA” means a site-specific report, to be prepared in accordance with the parameters laid down in the ESMF (as hereinafter defined) and acceptable to the Association, identifying and assessing the potential environmental and social impacts of the activities to be undertaken for the Project, evaluating alternatives, and designing appropriate mitigation, management, and monitoring measures.

  • Impact Assessment has the meaning given to it in Clause 22.1.3 (Variation Procedure);

  • conformity assessment means the process demonstrating whether the requirements of this Regulation relating to a device have been fulfilled;

  • Needs assessment In this section, LEAs are asked to describe the impact of the pandemic on their students, examine disproportionate impacts on specific student groups, and highlight the LEA’s promising practices in supporting students’ needs since March 2020.

  • Own risk and solvency assessment means a confidential internal assessment, appropriate to the nature, scale, and complexity of an insurer or insurance group, conducted by that insurer or insurance group of the material and relevant risks associated with the insurer or insurance group's current business plan, and the sufficiency of capital resources to support those risks.

  • Baseline area means any intra- state area (and every part thereof) des- ignated as attainment or unclassifiable under section 107(d)(1)(A)(ii) or (iii) of the Act in which the major source or major modification establishing the minor source baseline date would con- struct or would have an air quality im- pact for the pollutant for which the baseline date is established, as follows: equal to or greater than 1 μg/m3 (an- nual average) for SO2, NO2, or PM10; or equal or greater than 0.3 μg/m3 (annual average) for PM2.5.(ii) Area redesignations under section 107(d)(1)(A)(ii) or (iii) of the Act cannot intersect or be smaller than the area of impact of any major stationary source or major modification which:

  • Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Site Assessment means an environmental assessment report for the Mortgaged Property prepared at Borrower’s expense by a qualified environmental consultant engaged by Borrower, or by Lender on behalf of Borrower, and approved by Lender, and in a manner reasonably satisfactory to Lender, based upon an investigation relating to and making appropriate inquiries to evaluate the risks associated with Mold and any existence of Hazardous Materials on or about the Mortgaged Property, and the past or present discharge, disposal, release or escape of any such substances, all consistent with the most current version of the ASTM 1527 standard (or any successor standard published by ASTM) and good customary and commercial practice.

  • Environmental Impact Assessment means a systematic examination conducted to determine whether or not a programme, activity or project will have any adverse impacts on the environment;

  • Phase I Environmental Assessment A “Phase I assessment” as described in, and meeting the criteria of, the ASTM, plus a radon and asbestos inspection.

  • Medical assessment means an assessment of a patient’s medical condition secured by our Assistance Company working in conjunction with the Medical Evacuation Provider’s medical director and in collaboration with the attending physician. The Assistance Company in collaboration with the Medical Evacuation Provider, will utilize the assessment to determine at its sole discretion whether a Plan Holder is fit to fly; the most appropriate means to provide medical evacuation; the medical personnel who will be accompanying the patient on the transport; and to confirm the medical facility closest to one’s home can meet their medical needs. If the patient’s medical facility of choice is unable to provide the high level of medical care required by the patient, arrangements will be made to transport the patient to the appropriate medical facility closest to their home, or closest to patient's preferred medical facility in the US when possible.

  • conformity assessment body means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

  • Phase 1 means the first implementation phase of this section, beginning June 1, 2018 and ending May 31, 2022.

  • Risk and needs assessment means an actuarial tool scientifically proven to identify specific factors and needs that are related to delinquent and noncriminal misconduct;

  • Environmental Assessment Act means the Environmental Assessment Act, R.S.O. 1990, c.E.18.

  • Data Protection Impact Assessment means an assessment by the Controller of the impact of the envisaged processing on the protection of Personal Data;

  • Acoustic Assessment Report means the report, prepared in accordance with Publication NPC-233 and Appendix A of the Basic Comprehensive User Guide,by HGC Engineering and dated August 22, 2008 submitted in support of the application, that documents all sources of noise emissions and Noise Control Measures present at the Facility and includes all up-dated Acoustic Assessment Reports as required by the Documentation Requirements conditions of this Certificate to demonstrate continued compliance with the Performance Limits following the implementation of any Modification.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • Phase I means the first part of the tuition incentive assistance program defined as the academic period of 80 semester or 120 term credits, or less, leading to an associate degree or certificate.

  • Environmental Assessment means an assessment of the presence, storage or release of any hazardous or toxic substance, pollutant or contaminant with respect to the collateral securing a Shared-Loss Loan that has been fully or partially charged off.

  • Phase I Environmental Site Assessment is an assessment of the environmental condition of the Property performed in accordance with the American Society of Testing and Materials (ASTM) Standard E1527-05 “Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process,” or any successor to such ASTM Standard which is active at the time of the assessment.

  • Geotechnical engineer means a professional engineer registered with the Association of Professional Engineers, Geologists, and Geophysicists of the Northwest Territories and whose principal field of specialization is the design and construction of earthworks in a permafrost environment;