Available School Capacity definition

Available School Capacity means that portion of total public School Capacity that remains available for the Development Proposal after the following are subtracted: Current Student Enrollment; those student stations reserved by a Finding of Available School Capacity in the applicable School Concurrency Service Area; and those student stations reserved for Exempt Development.
Sample 1Sample 2
Available School Capacity the ability of a School Concurrency Service Area to accommodate the students generated by a proposed development at the adopted Level of Service standards. Available School Capacity shall be derived using the following formula for each School Type: Available School Capacity = (School Capacity x Adopted Level of Service¹) – (Enrollment ²+ Reserved Capacity) Where: ¹Adopted Level of Service = the ratio, expressed as a percentage, of Enrollment to School Capacity as jointly adopted by the School Board and Local Governments. ²Enrollment = Student enrollment as counted in the most recent official October count. Capacity Commitment Agreement: an executed Capacity Enhancement Agreement, whether individually or as part of a consortium of Capacity Enhancement Agreements, containing commitments to fund wholly or partially the construction of public school facilities to provide School Capacity at identified public schools required to serve the affected Residential Developments, as more fully set out in a Resolution of the School Board to be adopted within thirty (30) days from the date the School Board executes this Agreement.
Sample 1

Examples of Available School Capacity in a sentence

  • The board will also continue to consider legal student transfers.

  • If the School Concurrency Application is complete and the submission requirements have been met, the Director will forward the School Concurrency Application to the School District Designee for review and a finding with regard to Available School Capacity.

  • The notice must state the reasons for the denial and any actions that the applicant may take voluntarily to receive a Finding of Available School Capacity.

  • Determine whether or not Available School Capacity exists and whether the Applicant would like to explore Proportionate Share Mitigation options.

  • In those marine portions of any Wildlife Management Area designated an ‘‘idle speed only/no wake’’ zone in appendix III to this subpart, operating a vessel at a speed greater that idle speed only/no wake.

  • The agreement shall provide mitigation that is at least proportionate to the demand for Public School Facilities to be created by the additional or new residential units in the Development Proposal, and for which there is no Available School Capacity.

  • The School District Designee will measure Available School Capacity for each school level, based on the School Capacity of the Concurrency Service Area in which a Development Proposal is located.

  • Further, the School Board shall review and provide a determination on all School Concurrency Determination Applications for the impact of the projected Residential Development on Available School Capacity.

  • From the definitions stated above, the common thread is that Organisational Commitment is highlighted by how an employee identifies with the organisation.

  • If such mitigation has been proposed and agreed to, the School Board shall render a School Concurrency Recommendation documenting that Available School Capacity is or will be available for the Residential Development, once the mitigation measures have been memorialized in an enforceable and binding agreement with the Applicable Local Government, the School Board and the Applicant in a manner consistent with the applicable Land Development Regulations governing developer agreements.

Related to Available School Capacity

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • firm capacity means Natural Gas transmission Capacity contractually guaranteed as uninterruptible by the TSO according to this Agreement.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Available RP Capacity Amount means (i) the amount of Restricted Payments that may be made at the time of determination pursuant to Sections 7.06(d), (g), (h) and (l) minus (ii) the sum of the amount of the Available RP Capacity Amount utilized by the Borrower or any Restricted Subsidiary to (A) make Restricted Payments in reliance on Sections 7.06 (g), (h) or (l), (B) incur Liens pursuant to Section 7.01(bb), (C) make Investments pursuant to Section 7.02(n), (D) incur Indebtedness pursuant to Section 7.03(y) and (E) make prepayments, redemptions, purchases, defeasances and other payments in respect of Junior Financings prior to their scheduled maturity utilizing the Available RP Capacity Amount pursuant to Section 7.13 plus (iii) the aggregate principal amount of Indebtedness prepaid prior to or substantially concurrently at such time, solely to the extent such Indebtedness (A) was secured by Liens pursuant to Section 7.01(bb) or (B) was incurred pursuant to Section 7.03(y) and not secured pursuant to Section 7.01(bb) (it being understood that the amount under this clause (iii) shall only be available for use under Sections 7.01(bb) and/or 7.03(y), as applicable).

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;