Annular or Casing Injection/Disposal Well definition

Annular or Casing Injection/Disposal Well means a well into which fluids are injected between the surface casing and the well bore, the surface casing and the production casing, and/or the production casing and the tubing, or a well into which fluids are injected which does not have production casing, tubing and packer.

Related to Annular or Casing Injection/Disposal Well

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • Injection Point means the Electric Interconnection Point.

  • Horizontal well means a well bore drilled laterally at an angle of at least eighty (80) degrees to the vertical or with a horizontal projection exceeding one hundred (100) feet measured from the initial point of penetration into the productive formation through the terminus of the lateral in the same common source of supply.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Injection means the pressurized placement of septage waste below the surface of soil.

  • Residual disinfectant concentration means the concentration of disinfectant measured in mg/L in a representative sample of water.

  • stratigraphic test well means a drilling effort, geologically directed, to obtain information pertaining to a specific geologic condition. Ordinarily, such wells are drilled without the intention of being completed for hydrocarbon production. They include wells for the purpose of core tests and all types of expendable holes related to hydrocarbon exploration. Stratigraphic test wells are classified as (i) "exploratory type" if not drilled into a proved property; or (ii) "development type", if drilled into a proved property. Development type stratigraphic wells are also referred to as "evaluation wells".

  • Test Well means a well constructed for the purpose of obtaining information needed to design a well prior to its construction. Test wells are cased and can be converted to observation or monitoring wells and under certain circumstances to production wells

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Disposal area means 1 or more of the following at a location as defined by the boundary identified in its construction permit or engineering plans approved by the department:

  • State-certified production means a qualified production

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • iron ore concentrates means products (whether in pellet or other form) resulting from secondary processing but does not include metallised agglomerates;

  • Casing means a pipe or tubing of appropriate material, of varying diameter and weight, lowered into a borehole during or after drilling in order to support the sides of the hole and thus prevent the walls from caving, to prevent loss of drilling mud into porous ground, or to prevent water, gas, or other fluid from entering or leaving the hole.

  • CO2 means carbon dioxide.

  • Definite quantity contract means a fixed price contract that provides for a

  • Dry well means a type of infiltration practice that allows storm water run-off to flow directly into the ground via a bored or otherwise excavated opening in the ground surface.

  • Deep well means a well located and constructed in such a manner that there is a continuous layer of low permeability soil or rock at least 5 feet thick located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Underground injection means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)

  • Geothermal fluid means water in any form at temperatures greater than 120

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Pressurized gas duster means a pressurized product labeled to remove dust from a surface solely by means of mass air or gas flow, including surfaces such as photographs, photographic film negatives, computer keyboards, and other types of surfaces that cannot be cleaned with solvents. “Pressurized Gas Duster” does not include “Dusting Aid.”

  • Cannabis testing facility means an entity registered by

  • Blendstock means and includes any petroleum product component of motor fuel, such as naphtha, reformate, or toluene; or any oxygenate that can be blended for use in a motor fuel.

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by: