Annual inspections definition

Annual inspections means the official, first use in a twelve (12) month period, inspection made by an inspector, for the following purposes:
Sample 1Sample 2Sample 3
Annual inspections means the official, first use in a twelve (12) month period, inspection made by an inspector, for the purpose of determining if the amusement device is in safe operating condition for use in that twelve (12) month period and for the purposes of applying the regulated amusement device operating permit.
Sample 1Sample 2

Examples of Annual inspections in a sentence

  • Annual inspections for all municipal facilities not requiring industrial stormwater permit coverage are required for municipal facilities performing maintenance activities on mechanical equipment, facilities with fueling stations, facilities involved in waste storage, transfer or recycling, facilities with material stockpiles, and facilities storing fertilizers or pesticides.

  • Annual inspections shall be made of all backflow prevention assemblies and air gaps to determine whether they are operable.

  • Annual inspections shall be conducted in accordance with 310 CMR 15.300(5).

  • Annual inspections must be documented in writing on the form provided by the State Department of Education.

  • Annual inspections shall begin within one year of filing date of the deed for the stormwater control structure.

  • Annual inspections shall be performed within 12 months after April 14, 2011, and during the same month in each year thereafter.

  • Annual inspections will take place to ensure that appropriate maintenance will be carried out in the future.

  • Annual inspections, re- certifications, and fees are required in subsequent years.

  • Annual inspections as required by law will be coordinated by the Public Works Dept.

  • Annual inspections conducted by a university commissioned inspector shall be performed in accordance with the Act and the university’s memorandum of agreement.

Related to Annual inspections

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Final Inspection means the process and procedure described in UGC Section 12.1.

  • Lead inspection means a surface-by-surface investigation to determine the presence of lead- based paint and the provisions of a report explaining the results of the investigation.

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Inspections has the meaning set forth in Section 4.1.2.

  • External inspection means an inspection that does not involve examination of the internal surfaces of the pressure parts of the boiler.

  • Special inspector means an inspector holding a Washington commission identified under RCW 70.79.130.

  • Surveys has the meaning set forth in Section 4(o) above.

  • Home inspection report means a written report that is

  • Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.

  • Building Inspector means a person licensed to carry out completed residential building inspections under the Queensland Building and Construction Commission Regulations 2003;

  • Installation inspector means a person who, by reason of his knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems.

  • Certificate of inspection means an unsworn statement,

  • Site evaluation means a comprehensive analysis of soil and site conditions for an OWTS.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Detailed Specifications means the specifications for materials and works as specified in PWD BSR/ issued under the authority of PWD/ or as implied/added to or superseded by the special conditions.

  • Geotechnical engineer means a professional engineer registered with the Association of Professional Engineers, Geologists, and Geophysicists of the Northwest Territories and whose principal field of specialization is the design and construction of earthworks in a permafrost environment;

  • Electrical Inspector means a person appointed as such by the Appropriate Government under sub-section (1) of Section 162 of the Electricity Xxx 0000 and also includes Chief Electrical Inspector;

  • Independent Engineering Report means a report, in form and substance satisfactory to the Administrative Agent and each of the Lenders, prepared by an Independent Engineer, addressed to the Administrative Agent and the Lenders with respect to the Oil and Gas Properties owned by the Borrower or its Subsidiaries (or to be acquired by the Borrower or any of its Subsidiaries, as applicable) which are or are to be included in the Borrowing Base, which report shall (a) specify the location, quantity, and type of the estimated Proven Reserves attributable to such Oil and Gas Properties, (b) contain a projection of the rate of production of such Oil and Gas Properties, (c) contain an estimate of the net operating revenues to be derived from the production and sale of Hydrocarbons from such Proven Reserves based on product price and cost escalation assumptions specified by the Administrative Agent and the Lenders, and (d) contain such other information as is customarily obtained from and provided in such reports or is otherwise reasonably requested by the Administrative Agent or any Lender.

  • Geotechnical report or "geotechnical analysis" means a scientific study or evaluation conducted by a qualified expert that includes a description of the ground and surface hydrology and geology, the affected land form and its susceptibility to mass wasting, erosion, and other geologic hazards or processes, conclusions and recommendations regarding the effect of the proposed development on geologic conditions, the adequacy of the site to be developed, the impacts of the proposed development, alternative approaches to the proposed development, and measures to mitigate potential site-specific and cumulative geological and hydrological impacts of the proposed development, including the potential adverse impacts to adjacent and down-current properties. Geotechnical reports shall conform to accepted technical standards and must be prepared by qualified professional engineers or geologists who have professional expertise about the regional and local shoreline geology and processes.

  • Environmental Review means the Federal

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Phase I Report means, with respect to any Facility, a report that (i) conforms to the ASTM Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process, E 1527, (ii) was conducted no more than six months prior to the date such report is required to be delivered hereunder, by one or more environmental consulting firms reasonably satisfactory to Administrative Agent, (iii) includes an assessment of asbestos-containing materials at such Facility, (iv) is accompanied by (a) an estimate of the reasonable worst-case cost of investigating and remediating any Hazardous Materials Activity identified in the Phase I Report as giving rise to an actual or potential material violation of any Environmental Law or as presenting a material risk of giving rise to a material Environmental Claim, and (b) a current compliance audit setting forth an assessment of Holdings’, its Subsidiaries’ and such Facility’s current and past compliance with Environmental Laws and an estimate of the cost of rectifying any non-compliance with current Environmental Laws identified therein and the cost of compliance with reasonably anticipated future Environmental Laws identified therein.

  • The Inspecting Officer means the person specified in the contract for the purpose of Inspection of stores or work under the contract and includes his authorised representative;

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Examination Criteria means the loan classification criteria employed by, or any applicable regulations of, the Assuming Institution’s Chartering Authority at the time such action is taken, as such criteria may be amended from time to time.