EXHIBIT 10-6
WAIVER AND CONSENT
Dated as of: August 2, 2005
Reference is hereby made to the Loan and Security Agreement, dated
as of December 18, 2003 (as heretofore amended or otherwise modified and as
further amended, modified, supplemented, extended, renewed, restated or
replaced, the "Loan Agreement"), by and among Lexington Precision Corporation
("LPC") and Lexington Rubber Group, Inc. ("LRG"), as Borrowers (LPC and LRG,
each a "Borrower" and, collectively, the "Borrowers"), the lenders from time to
time party thereto (the "Lenders"), and Ableco Finance LLC, in its capacity as
agent for the Lenders (in such capacity, the "Agent"), and other agreements,
documents and instruments at any time executed and/or delivered in connection
therewith (all of the foregoing, including the Loan Agreement, as the same now
exist or may hereafter be amended, modified, supplemented, extended, renewed,
restated or replaced, being collectively referred to herein as the "Financing
Agreements"). Capitalized terms used but not otherwise defined herein shall have
the meanings given to them in the Loan Agreement.
LPC is entering into an Equipment Purchase Agreement with Premier
Tool & Die Cast Corp. or an affiliate thereof ("Buyer"), dated as of August 2,
2005 (the "Purchase Agreement") providing for the sale of certain assets
(collectively, the "Purchased Assets") consisting of all inventory of LPC's
Lexington Die Casting Division for a purchase price of approximately $92,000
(the "Inventory Purchase Price") and the equipment listed on Schedule I attached
hereto, located at LPC's Lexington Die Casting Division in Lakewood, New York,
for an aggregate purchase price of $2,560,000 (the "Equipment Purchase Price"),
of which $2,360,000 ("Initial Payment") shall be paid in cash at closing and
$200,000 shall be paid by Buyer's delivery of a promissory note (the "Note")
which shall be payable on April 30, 2008
For good and valuable consideration, the receipt and sufficiency of
which is hereby acknowledged, the Agent, the Lenders and the Borrowers hereby
agree as follows:
1. Consents. Subject to the terms and conditions contained
herein and notwithstanding anything to the contrary set forth in the Loan
Agreement or any other Financing Agreement, the Agent and the Lenders
hereby consent to:
(a) the sale of the Purchased Assets to Buyer in
accordance with the terms and conditions of the Purchase Agreement as in
effect on the date hereof;
(b) the execution by the Borrowers of the Waiver and
Consent, dated of even date herewith, among the Borrowers, the Working
Capital Agent and the Working Capital Lenders (the "Working Capital
Consent"); and
(c) the sale or disposition of the Real Property located
on Xxxxxxx Drive in LaGrange, Georgia (the "LaGrange Property"); provided,
that, (A) the net cash proceeds of such sale or disposition shall be at
least $1,500,000, (B) all of the net cash proceeds of such sale or
disposition shall be paid to Agent for application to the Obligations in
accordance with Section 2.4(c)(ii) of the Loan Agreement, (C) such sale or
disposition and application of proceeds shall occur on or before December
31, 2005, and (D) except as Agent may otherwise agree in writing, as of
the date of such sale or disposition and after giving effect thereto, no
Default or Event of Default shall have occurred and be continuing.
2. Release. The Agent, with the consent of the Lenders, agrees
to execute and deliver to LPC, simultaneously with this Waiver and
Consent, a release of liens in the form attached hereto as Exhibit A (the
"Release"). The Borrowers hereby acknowledge and consent to the Release.
3. Conditions Precedent. The consents contained herein shall
only be effective upon the satisfaction of each of the following
conditions precedent in a manner reasonably satisfactory to the Agent:
(a) the Working Capital Agent shall have received in
cash or other immediately available funds, the sum of $2,452,000 in
respect of the Initial Payment and the Inventory Purchase Price, from or
on behalf of Buyer, for application by the Working Capital Agent to the
Working Capital Debt as set forth in Section 5 of the Working Capital
Consent;
(b) the Agent shall have received counterparts of this
letter agreement, duly authorized, executed and delivered by the
Borrowers;
(c) the Agent shall have received, in form and substance
reasonably satisfactory to the Agent, true, correct and complete copies of
the following documents, each duly authorized, executed and delivered by
the parties thereto: the Purchase Agreement and the Note, together with
all schedules and exhibits to each of the foregoing (such documents,
collectively, the "Purchase Documents"); and
(d) the Agent shall have received a fully executed copy
of the Working Capital Consent.
4. Covenants.
(a) The Borrowers shall deliver to the Working Capital
Agent (or its counsel), within five (5) Business Days of the closing of
the transactions pursuant to the Purchase Agreement, the original Note,
together with an allonge, or other appropriate instrument of transfer,
undated and executed in blank.
(b) The Borrowers shall cause all amounts at any time
payable to any Borrower pursuant to the Note to be paid by Buyer directly
to the Working Capital Agent for application to the Working Capital Debt
and the Obligations as follows: first, to the outstanding principal amount
of the WC Term Loans, until paid in full, and thereafter, in accordance
with Section 2.4(c) of the Loan Agreement.
(c) The Borrowers shall not effect or consent to any
amendment or other modification of any Purchase Document without the prior
written consent of the Agent.
(d) The Borrowers shall sell or otherwise dispose of the
LaGrange Property (i) on or before December 31, 2005, (ii) the net cash
proceeds of such sale or disposition shall be at least $1,500,000, and
(iii) all of the net cash proceeds of such sale or disposition shall be
paid to Agent for application to the Obligations in accordance with
Section 2.4(c)(ii) of the Loan Agreement.
(e) Borrowers shall pay to the Agent, for the account of
the Lenders, a consent fee in the amount of $15,000, which fee shall be
fully earned and payable on the date hereof.
5. Additional Representations and Warranties. Each Borrower,
hereby jointly and severally represents, warrants and covenants to the
Agent and the Lenders as follows, which representations, warranties and
covenants are continuing and shall survive the execution and delivery
hereof:
(a) this letter agreement and the Purchase Documents
have been duly authorized, executed and delivered by all necessary
corporate action on the part of such Borrower which is a party hereto and
thereto, including any required stockholders action, are in full force and
effect as of the date hereof, and constitute valid and binding obligations
of such Borrower enforceable against it in accordance with their terms,
except as limited by bankruptcy, insolvency, reorganization and similar
laws affecting the enforcement of creditors' rights or contractual
obligations generally and subject to general principles of equity.
6. Effect of this Consent.
(a) Except as provided above, the Loan Agreement and the
other Financing Agreements shall remain in full force and effect, and the
foregoing waivers and consents shall be limited to the matters set forth
herein and shall not extend to any other transaction. The foregoing
waivers and consents do not allow any other or further departure from the
terms of the Loan Agreement or any other Financing Agreement.
(b) Each Borrower hereby acknowledges and agrees that
this Waiver and Consent constitutes a "Financing Agreement" under the Loan
Agreement. Accordingly, it shall be an immediate Event of Default under
the Loan Agreement if (i) any representation or warranty made by a
Borrower under or in connection with this Waiver and Consent shall have
been untrue, false or misleading in any material respect when made, or
(ii) a Borrower shall fail to perform or observe any term, covenant or
agreement contained in this Waiver and Consent.
7. Further Assurances. The parties hereto shall execute and
deliver such additional documents and take such additional actions as may
be necessary to effectuate the provisions and purposes of this Agreement.
8. Governing Law. The rights and obligations hereunder of each
of the parties hereto shall be governed by and interpreted and determined
in accordance with the laws of the State of New York (without regard to
principles of conflict of laws).
9. Waiver, Modification, Etc. No provision or term hereof may
be modified, altered, waived, discharged or terminated orally, but only by
an instrument in writing executed by the party against whom such
modification, alteration, waiver, discharge or termination is sought.
10. Entire Agreement. This Agreement contains the entire
agreement of the parties hereto concerning the subject matter hereof and
supersedes all prior oral or written
discussions, proposals, negotiations or communications concerning the
subject matter hereof.
[REMAINDER OF PAGE INTENTIONALLY LEFT BLANK.]
11. Counterparts. This Waiver and Consent may be executed in
any number of counterparts, each of which, when so executed and delivered,
shall be deemed to be an original and all of which, taken together, shall
constitute one and the same Waiver and Consent. The delivery of an
executed counterpart of this Waiver and Consent by facsimile or electronic
mail shall have the same force and effect as delivery of any original
executed counterpart of this Waiver and Consent. Any party delivering an
executed counterpart of this Waiver and Consent by facsimile or electronic
mail also shall deliver an original executed counterpart of this Waiver
and Consent, but the failure to deliver an original executed counterpart
shall not affect the validity, enforceability, and binding effect of this
Waiver and Consent as to such party or any other party.
LEXINGTON PRECISION CORPORATION,
Borrower
By: /s/ Xxxxxxx X. Xxxxx
-----------------------------------
Name: Xxxxxxx X. Xxxxx
Title: Chairman
LEXINGTON RUBBER GROUP, INC.,
Borrower
By: /s/ Xxxxxxx X. Xxxxx
-----------------------------------
Name: Xxxxxxx X. Xxxxx
Title: Chairman
ABLECO FINANCE LLC, on behalf of itself
and its affiliate assigns, as Agent and as a
Lender
By: /s/ Xxx Xxxx
-----------------------------------
Name: Xxx Xxxx
Title: SVP
SCHEDULE I
PURCHASED ASSETS
1. All inventory of LPC's Lexington Die Casting Division consisting of metals,
packaging and pallets located at LPC's facility at 000 Xxxxxxxxxx Xxxx,
Xxxxxxxx, XX on the date hereof, to the extent sold to Buyer pursuant to the
Purchase Agreement.
2. The following machinery and equipment:
One (1) HPM Model D-1000-A 1,000-Ton Aluminum Cold Chamber Die Cast Machine, S/N
R95356/64-088, including:
(1) Rimrock Multi-Link Auto Reciprocator/Die Sprayer
(1) Advance Model SL-1200 Automatic Ladler, S/N 31524-98, (1998)
(1) Rimrock Multi-Link Extractor
(1) MPH 5,000-Lb. Gas-Fired Holding Furnace, S/N 6094-82; with
Temperature Controls
One (1) HPM Model D-1000-A 1,000-Ton Aluminum Cold Chamber Die Cast Machine, S/N
R98176/65-151, including
(1) Rimrock Multi-Link Auto Reciprocator/Die Sprayer
(1) Rimrock Model 305 Multi-Link Automatic Ladler
(1) Rimrock Multi-Link Extractor
(1) Firebrand 3,500-Lb. Gas-Fired Holding Furnace, S/N 9038, with
Temperature Controls
One (1) Prince Model 836 CCA 800-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx,
XX0000 including:
(1) Advance Model SR-1150 Automatic Reciprocator/Die Sprayers
(1) Advance Model SL-1500 Automatic Ladler, S/N 32070-99
(1) ABB Type IRB4400-M98 Industrial Robot, S/N 44-12809
(1) O'Brien/Xxxx Model PD512-00 3,500-Lb. Gas-Fired Holding Furnace, S/N
20006-01
One (1) Prince Model 836 CCA 800-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx,
XX0000, including:
Advance Model SR-1150 Automatic Reciprocator/Die Sprayers
Advance Model SL-1500 Automatic Ladler, S/N 3019-00
(1) ABB IRB4400 M2000 Industrial Robot, S/N 44-20742
(1) Seco/Warwick 3,200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
FSR-954-95
One (1) Idra Model OL-700 770-Ton Aluminum Cold Chamber Die Cast Machine, S/N
7187 including:
(1) Rimrock Automatic Extractor/Die Sprayer
(1) Rimrock Ladler S/N C10113
(1) Seco/Warwick 3,200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
FSR-956-95
One (1) Idra Model XX-000 XXXX 000-Xxx Aluminum Cold Chamber Die Cast Machine,
S/N 6932, including:
(1) Rimrock Automatic Extractor/Sprayer
(1) Rimrock Model 405 Automatic Ladler, S/N 6231
(1) O'Brien & Xxxx Model ND514-99 1,500-Lb. Gas Fired Aluminum Holding
Furnace, S/N 20017
One (1) Prince Model 836 CCA 800-Ton Aluminum Cold Chamber Die Cast Machine, S/N
DA1038, including:
(1) Advance Model SR1150 Automatic Reciprocator/Die Sprayer, S/N 3018-00
(1) Advance Model SL-1500 Automatic Ladler, S/N 32101-00
(1) ABB Type IRB4400M2000 Industrial Robot, S/N 44-21383
(1) Seco/Warwick 3,200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
F-628-95
MELT ROOM
1- O'Brien & Xxxx Model MD127-98 Xxxx Xxxxxxx, X/X 00000-0, Xxxxx #3, (1999);
Vertical, Stack Type; with 84" x 48" x 24" Deep Conveyor Shaker; Mayfran
36"W x 15"L Elevated Scrap Conveyor, with Stack Shaker; Gas-Fired
Stack-Type Melting Furnace, 72"D x 60"H, with (3) Burners, Rotating Base,
Structural Steel Supports, and Mezzanine; Operator Control Panel, with
Xxxxx-Xxxxxxx Model PanelView 550 PLC Controls; and Digital Temperature
Controllers
1- MPH Model ACM-2000 20,000-Lb. Capacity Xxxxxxxxxxxxx Xxxxxxx, X/X 0000-00,
Xxxxx #0, (1979); Aluminum, Melt, 5,000,000-Btus Input, 2,000(degree)F
Maximum Temperature, Gas Fired; with Epic Burners; North American Control
Panel, with Digital Temperature Controllers; and Single Door, with
Pneumatic Lift; (Refractory Brick Rebuilt 2001)
1- MPH Model ACM-2000 20,000-Lb. Xxxxxxxxxxxxx Xxxxxxx, X/X 000-00, Xxxxx #0,
(1974); Aluminum, Melt, 5,000,000-Btus Input; 2,000(degree)F Maximum
Temperature, Gas Fired; with Epic Burners; North American Control Panel,
with Digital Temperature Controllers; and Single-Swing Open Door;
(Refractory Brick Replaced 1994; Refractory Brick Rebuilt 2001)
1- Amcor Injecta Model II Fluxing Machine, S/N 66-201, (1966); with Xxxxx
Gas-Fired Charging Stand; Carts; and Tanks
DIE XXXX XXXX
0- Xxxxxx-Xxxxxxxxx Xxxxxxxxx 60-Ton Trim Press, S/N 1169; Hydraulic, 4-Post,
90" x 32" Between Posts
1- Manufacturer Unknown 35-Ton Hydraulic Trim Press; 4-Post, Downacting, 26"
x 42" Between Posts; with Self-Contained Hydraulic Power Supply; and
Safety Light Curtains; (Remanufactured By Keystone In 2000)
1- Roto-Finish 96"D Vibratory Finisher, S/N Unknown; with Powered Cleated
Belt Infeed Conveyor
1- X.X. Xxxxxx Model DCT-38 38-Ton Trim Press, S/N 10980-001, (1985);
Hydraulic, 4-Post, Downacting, 40" x 26" Between Posts; with
Self-Contained Hydraulic Power Supply
1- Roto-Finish 96"D Vibratory Finisher, S/N Unknown, Asset #4
1- Manufacturer Unknown 35-Ton Hydraulic Trim Press, S/N Unknown; 4-Post,
Downacting, Estimated 26" x 42" Between Posts; with Self-Contained
Hydraulic Power Unit; and Safety Light Curtain
1- Roto-Finish Model Multi-Pass 96"D Vibratory Finisher, S/N Unknown
1- Roto-Finish Model Multi-Pass 96"D Vibratory Finisher, S/N MP-94-5-4-96-A2,
(1996); Job #3822
1- Xxxxxx 700-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 0000, Xxxxx #7,
(1983); (Remanufactured By EPCO In 1994); Epco S.O. #9429, T-Slot Platen,
Interface Shot End, Solid Frame Shot End Connection; with Safety Ratchets;
Hydraulic Ejector; Xxxxx-Xxxxxxx Model PanelView 550 PLC Controls; Visi
Trak True Trak 2020 Monitor; and Analysis System, To Include:
(1) Rimrock Extractor/Sprayer
(1) Rimrock Multi-Link Ladler
(1) Onex
(1) Mesh Belt Air Cooling Conveyor
(1) Manufacturer Unknown 1,500-Lb. Gas-Fired Holding Furnace
1- Roto-Finish Model Spiratron 72"D Vibratory Finisher, S/N ER-1822S-96-C8,
(1996); Job #3814
1- Xxxxxx 700-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 0000, Xxxxx #8;
(Estimated 1960s); Epco S.O. # 9056; (Remanufactured by EPCO 1990); T-Slot
Platens, Interface Shot End, Solid Frame Shot End Connection; with Safety
Ratchets; Solid Frame Tie Bar Pullers; Hydraulic Ejector; and Xxxxxxx
SCS-2000 Shot Control System; To Include:
(1) Rimrock Extractor/Sprayer
(1) Rimrock Model 305 Multi-Link Automatic Ladler
(1) Manufacturer Unknown 500-Lb. Gas Fired Holding Furnace
(1) Steel Mesh Belt Air Cooling Conveyor
1- Roto-Finish Model Spiratron 72"D Vibratory Finisher, S/N Unknown
1- Xxxxxx 800-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 000, Xxxxx #9,
(1964); (Remanufactured By EPCO In 1991); Epco S.O. #9137, 50"V x 50"TH
T-Slot Platen, 35"H x 36"V Die Clearance, 18" Minimum Daylight, 36"
Maximum Daylight, 0-10-Shot Position, 28" Stroke, Motorized Die Height
Adjustment, Closed Loop Shot End, 3-Bar Shot End Connection; with Safety
Ratchets; Hydraulic Ejector; Xxxxx-Xxxxxxx Model PanelView 550 PLC
Controls; and Xxxxxxx SCS-2000 Shot Control System, To Include:
(1) Rimrock Model 195 Extractor/Sprayer
(1) Rimrock Model 465 Multi-Link Automatic Ladler
(1) Manufacturer Unknown 1,000-Lb. Gas-Fired Holding Furnace
(1) Steel Mesh Belt Air Cooling Conveyor
0- X. X. Xxxxx Xxxxx XXX-00-0000 30-Ton Trim Press, S/N 0000-000-000, (1979);
Hydraulic, 4-Post, Downacting, 30" x 42" Between Posts; with
Self-Contained Hydraulic Power Supply
1- Roto-Finish 96"D Vibratory Finisher, S/N Unknown
1- Xxxxxx 600-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 0000, Xxxxx
#11; (Remanufactured By EPCO In 1991); Epco S.O. #9136, 47"V x 40"TH
T-Slot Platen, 28.5"H x 28.5"V Die Clearance, 18" Minimum Daylight, 28"
Maximum Daylight, 0-
6-Shot Position, 17.5" Stroke, Motorized Die Height
Adjustment, Interface Shot End, Solid Frame Shot End Connection; with
Safety Ratchets; Hydraulic Ejector; Visi-Track True Trak 2020 Monitor, and
Analysis System, To Include:
(1) Shotbeads Sprayer
(1) Rimrock Automatic Extractor
(1) Xxxxx Automatic Ladler
(1) Manufacturer Unknown 800-Lb. Gas-Fired Holding Furnace;
(Furnace Currently in Maintenance; Currently Not in Service;
Operable)
(1) B.C. Fabricators Steel Mesh Belt Air Cooling Conveyor
1- Xxxxxx 1,200-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 00000, Xxxxx
#12, (1964); (Shot End Rebuilt In 2000); 65"V x 65"TH T-Slot Platen, 42"H
x 42"V Die Clearance, 10.2" Minimum Daylight, 30" Maximum Daylight,
2-12-Shot Position, 30" Stroke, Interface Shot End, 2-Bar Shot End
Connection; with Safety Ratchets; Visi Trak True Trak 2020SX Monitor, and
Analysis System, To Include:
(1) Rimrock Model 195 Extractor/Sprayer
(1) Rimrock Multi-Link Ladler (Maintenance Shop)
(1) Seco/Warwick 3200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
FSR-955-95; 47"W x 81-1/2"L x 18"H, 2,000(degree)F Maximum
Temperature; with Digital Temperature Controller
(1) Steel Mesh Belt Air Cooling Conveyor (Scrap)
(Currently Not in Service; Inoperable)
1- Sweco 60"D Vibratory Finisher, S/N Unknown; with Soundproof Lid
1- New Xxxxxxx Xxxx Wringer, S/N Not Available; 24" Diameter x 00" Xxxxx
0- Xxxxxxxx Xxxxxx Xxxxx, S/N 98025, (1998); 7-1/2 Ton x 60' Span, Single
Girder, Top Running, Overhead, Electric, Traveling; with Konecranes Model
XL400 Electric Cable Hoist; and Pendant Control
1- Platnick 5-Ton Bridge Crane, S/N 95037, (1995); 60' Span, Single Girder,
Top Running, Overhead, Electric, Traveling; with Konecranes Model XL300
Electric Cable Hoist; and Pendant Control
1- Kitamura Model Mycenter-0 Vertical Xxxxxxxxx Xxxxxx, X/X 00000, Xxxxx
#5104, (1997); Dual, 12" x 18", 1" Tables, 130-Lb. Table Load Capacity,
12" X-, 10" Y-, and 12" Z-Axis Travel, 5.3" to 17.3" Distance From Table
Surface to Spindle Nose, 7.8" to 17.8" Distance From Column to Table
Center Line, #30 Taper, 80 to 8,000-rpm Spindle Speeds, 3 hp Spindle
Drive; with Spare Changer Automatic Pallet Changer; 16-Position Automatic
Tool Changer, with Asst. #30 Taper Tool Holders; Kitamura Yasnac CNC
Controls; and (2) Model 10 HC Custom Designed and Fabricated 10-Cell Multi
Collet Work Hold Fixtures
3- 3-Ton Jib Cranes; Each with 3-Ton Capacity Chain Hoist, Pendant Controlled
1- Spanco 5-Ton Jib Crane, S/N 0208205; with Xxxx-Box 5-Ton Capacity Cable
Hoist,
Pendant Controlled
1- 5-Ton Jib Crane; with Xxxxxx 5-Ton Capacity Chain Hoist, Manual
1- Xxxxxxxx Model RG Rotoblast Shot Blast Machine, S/N 140-2RG1-681; 22" x
30", Tumblast; with Reclaim Elevator; and Xxxxxxx Model DK-1055
(Duskolector) Bag-Type Dust Collector, 4-Bag; (Overhauled In June 2003)
1- BAC Model VTO-065-J Cooling Tower, (2003); Rooftop Mounted
MACHINING
1- Jet Model JDP-20MF 20" Single-Spindle Floor-Type Drill, S/N 7030560
1- Mfr. Unknown 16" Single-Spindle Floor-Type Drill; with Multi-Spindle Drill
Head
1- Delta Rockwell 16" Single-Spindle Floor-Type Drill
1- 8" Single-End Wire Wheel Buffer
1- Xxxxxxxx Model 1667 16" 2-Spindle Production Drill, S/N 517856
1- Lincoln Model DPF1658-2 16" Single-Spindle Floor-Type Drill, S/N 522795,
(1992)
1- Xxxxxxxx Model 1635 16" 4-Spindle Production Drill, S/N 118087
1- Enshu Model Type XX-XX Vertical CNC Xxxxxxx Xxxxxx, X/X 000, Xxxxx #0,
(1994); 16" x 27-1/2" Table, 23" X-, 16" Y-, and 16" Z-Axis Travel, 120 to
12,000-rpm Spindle Speeds, 7.3 hp, #30 Taper; with ENAC-1 CNC Control
1- Xxxxxxx Model R065LC26ID266C218A59S220 6-Ton C-Frame Press, S/N 21063,
(1968)
1- Enshu Model Type XX-XX Vertical CNC Xxxxxxx Xxxxxx, X/X 000, Xxxxx #0,
(1994); 16" x 27-1/2" Table, 23" X-, 16" Y-, and 16" Z- Axis Travel, 120
to 12,000 rpm Spindle Speeds, 7.3 hp, #30 Taper; with ENAC-1 CNC Control;
and Xxxx Rotary Indexer
1- Xxxxxxxx Granite Surface Plate; 18" x 24" x 4" Table Size
1- Xxxxxxxx 12" x 18" x 4" Granite Surface Plate
1- Manufacturer Unknown Aluminum Belt Sander; 3" Belt; with Dust Collector
1- Mid-West Tool Custom Designed and Fabricated Brushing Press, S/N 246
1- Xxxxxxxx Model 2224 20" Single-Spindle Production Drill, S/N 106932
1- Custom Designed & Fabricated Horizontal and Vertical Drilling Machine;
with
Production Table
1- Duracraft Model 45161 16" Single-Spindle Floor-Type Drill, S/N G03599,
(1987)
1- Enco Model DS-20 20"D Disc Sander, S/N 8160, (1984), 2 hp; (Currently Not
in Service; Operable)
1- Bridgeport Vertical Milling Machine, S/N J107727, (1967), 1 hp; 80 to
2,720-rpm Spindle Speeds, 9" x 42" Table
0- Xxxxxx Xxxxx Grinder, S/N Unknown
1- Specially Manufactured Horizontal Drilling Machine
1- Specially Manufactured Horizontal Drilling Machine
1- Bridgeport Vertical Milling Machine, S/N J15328, 1 hp; 80 to 2,720-rpm
Spindle Speeds, 9" x 42" Table; with Specially Manufactured Work Fixture
1- Xxxxxxxx Model 1667 16" Single-Spindle Production Drill, S/N 516547
1- Takisawa Model TC-2 CNC Lathe, S/N THRMU5947, (1985); 7.37 hp, 20" Swing;
with 8-Position Turret; and Fanuc CNC Controls
1- Seibu Model SNC-200UP Horizontal CNC Chucker, S/N 0-00000-0; 8" Swing, 5"
x 12" T-Slot Worktable; with Xxxxxx Xxxxx; Fanuc Series O-T CNC Control;
and Oilmatic Model KTVM-5C-HM1 Automatic Oil Temperature Regulator
1- Seibu Model SNC-200UP Horizontal CNC Chucker, S/N 0-00000-0; 8" Swing, 5"
x 12" T-Slot Worktable; with Xxxxxx Xxxxx; Fanuc Series O-T CNC Control;
and Oilmatic Model KTVM-5C-HM1 Automatic Oil Temperature Regulator
1- Mitutoyo 48" x 72" x 10" Granite Surface Plate, S/N 2505-1
1- Lot of Factory and Support Equipment For Both Machining and Tool Room
1- Hitachi Seiki Model HT20SII CNC Turning Center, S/N 2843, Asset #785,
(1995), 15 hp; CNC, 2-Axis, 5,000-rpm Spindle Speeds, 15" Maximum Swing,
8-1/4" Maximum Turning Diameter, 15" Maximum Turning Length, 2" Bar
Capacity; with 10-Position Turret; Xxxxxx Xxxxx; Aercology Mist Collector;
Elevated Chip Conveyor; and Seiki Multi CNC Control
1- Sugino Model ES2-2-3060 Self Feeder, S/N J11DA301219, (2004); with Xxxxxx
Xxxxx; and Level Clamp
1- Ultraline 6" W x 6' L Inclined Nose Over Conveyor, (2004); Variable Speed
1- Powermatic Model 1100 Drill Press, S/N 0-1186-1
TOOLROOM
1- Wellsaw Model 1118 Horizontal Band Saw, S/N 2599; 30" Part Width Capacity,
12" Throat
1- Carlton 3' x 10"D Radial Arm Drill, S/N Unknown; 36 to 1,500-rpm Spindle
Speeds; with 18" x 24" Drill Box Table; and 36" x 42" T-Slot Platform, 30"
Vertical Travel
1- Xxxxxxx 3-Ton Chain Hoist; Pendant Controlled
1- Xxxx Model 75H 75-Ton Capacity Hydraulic H-Frame Press, S/N 140208,
(1960); 44" Between Posts
1- Lincoln Model Tig 300/300 300-Amp. Welder, S/N AC-586982, (1984); with
Dyna-Flux Chiller
1- Lincoln Model Square Wave Tig 175 175-Amp. Welder, S/N 01330-41980612459,
(1988)
1- Bridgeport Variable-Speed Vertical Milling Machine, S/N 133804, (1951); 60
to 4,200-rpm Variable Spindle Speeds, 9" x 48" Table; with Bausch & Lomb
Acu-Rite II 3-Axis Digital Readout; and Machinists Vise
1- Bridgeport Vertical Milling Machine, S/N 58781, (1962), 1 hp; 80 to
2,720-rpm Spindle Speeds, 9" x 48" Table; with Teledyne Xxxxxx Pathfinder
2-Axis Digital Readout
1- Bridgeport Vertical Milling Machine, S/N 105568, (1967), 1 hp; 80 to
2,720-rpm Spindle Speeds, 9" x 48" Table
1- South Bend Model CL8117C Toolroom Lathe, S/N 8668HKX12; 16" Swing, 52"
Bed, 38" Between Centers, 1-1/2" Hole Through Spindle; with Threading
Attachment
1- Millport Model SJ-1760G Engine Lathe, S/N 840517, (1984); 17" Swing, 80"
Bed, 60" Between Centers, 2" Hole Through Spindle; with Threading
Attachment
1- Standard-Modern Model Utilathe Series 2000 Toolroom Lathe, S/N 3873; 50 to
1,500-rpm Spindle Speeds, 13" Swing, 42" Bed, 30" Between Centers, 1-1/2"
Hole Through Spindle
1- Cincinnati Xxxxxxxx Model Super Service 28" Single-Spindle Production
Drill, S/N 3L414; 14" Throat, 18" x 28" T-Slot Worktable; with Machinists
Vise
1- Motor-Xxxx Model MA6 Single-Spindle Production Drill, S/N MA581; 12"
Throat, 21" x 22" Worktable
1- Xxxx Model NS18 18" Vertical Band Saw, S/N 7311, (1953); 24" x 24"
Worktable; with Blade Welding and Grinding Attachment
1- Supermax Model YC-2VA Vertical Milling Machine, S/N 061165, (1983), 2 hp;
75 to 3,600-rpm Spindle Speeds, 8" x 42" T-Slot Worktable, Belt-Driven
Head; with Xxxxx Xxxx Control
0- Xxxxxx Xxxxxxxx Xxxxx 00XX Hardness Tester, S/N 2233-1285
1- Parts Washer; 22" x 32"
1- Xxxxxxxx 16" x 24" x 4" Granite Surface Plate, S/N 619755
1- Xxxxxxx Model 142L Gas-Fired Furnace, S/N 2846; 180-BTU Maximum Input
1- Xxxxxxxxx Model FSG-618 Surface Grinder, S/N A277A040, 1 hp; Hand Feed, 8"
Grinding Wheel; with 6" x 18" Permanent Magnetic Xxxxx
1- Baldor 6" Double-End Carbide Tool Grinder
1- Xxxxxx Model 375 Drill Grinder
1- Abrasive Machine Tool 6" x 18" Surface Grinder, S/N 317; Hand Feed, 12"
Grinding Wheel; with 6" x 18" Permanent Magnetic Xxxxx
1- Xxxxx 10" x 16" Surface Grinder, S/N 17H-5022; Hydraulic Feed, 12"
Grinding Wheel; with 10" x 16" Permanent Magnetic Xxxxx
1- Lincoln Model DS-20 20"D Disc Sander, S/N 402000, (1994), 2 hp; 1,720
Maximum rpm
1- Grieve Model B1-650 Bake Oven, S/N 14188; Drive-In, 64"W x 80"D x 82"H
1- Zero Model BNP55-6 2-Hole Spin Blast Cabinet, S/N 22535; 42"L x 24"D x
30"H; with Dust Collector
1- Atlas Copco Model GAU707 Rotary Screw Air Compressor, S/N ARP878018,
(1987), 75 hp; with Vertical Air Receiver Tank; and Arrow Pneumatics
Compressed Air Dryer
1- Xxxxxxxxx-Xxxx Model SSR Rotary Screw Air Compressor, S/N N0293, (1993),
50 hp; 44,514 Hours Indicated; with Vertical Air Receiver Tank
1- Atlas Copco Xxxxx XX00 Rotary Screw Air Compressor, S/N Unknown, 75 hp;
Approximately 50 hp; 181 Maximum psig, 57,650 Hours Indicated
1- Xxxxxxxx Model HPRP500 Air Dryer, S/N WH500A4600006110; 200 Maximum psig
1- Van Air Model EMD400-A 400 CFM Air Dryer, S/N 97-7948K-4, (1997), 2 hp;
350 Maximum psig
1- Sullair Model LS20-100SL/W/SUL Rotary Screw Air Compressor, S/N
003-122520, (2000), 100 hp; 110 Maximum psig
1- Manufacturer Unknown 30"D x 48"L x 7"H Granite Surface Plate, S/N 1129
1- Xxxxx Model Super 612 6" x 12" Surface Grinder, S/N 47019, (2003);
w/Accu-Rite Qwick Xxxxx XXX
0- Xxxxxxxxx Xxxxx XXX-0000-0 Magnetic Drill, (2000)
MATERIAL HANDLING
1- Yale Model GLC030BFNUAE076 3,000-Lb. LP Gas Lift Truck, S/N A809N05573V,
(1998); 171" Lift Height, 3-Stage Mast, Solid Tire, 5,310 Hours Indicated;
with Side Shift
1- Hyster Model J35B 3,500-Lb. Electric Lift Truck, S/N BI60V02518N, (1992);
118" Lift Height, 2-Stage Mast, Solid Tire, 6,975 Hours Indicated; with
Side Shift
1- Yale Model ESC020ABN24SV083 2,000-Lb. Stand-Up Rider-Type Electric Lift
Truck, S/N A824N06364U, (1997); 126" Lift Height, Single Mast, Solid Tire,
1,945 Hours Indicated
1- Xxxxx Model GCX25 5,000-Lb. LP Gas Lift Truck, S/N CX2300588-8805KOF,
(1992); 205" Lift Height, Solid Tire, 4,401 Hours Indicated; with Side
Shift
1- Hyster Model S120E 12,000-Lb. Capacity LP Gas Lift Truck, S/N C004D08624G,
(1986); 182" Lift Height, 3-Stage Mast, Solid Tire, 5,477 Hours Indicated
2- Big Xxx Model 52A Die Lifts, S/N 1120; and X/X Xxxxxxx
0- Xxx Xxx Xxxxx 00000X 1,000-Lb. Capacity Electric Die Lift
5- Lexco Die Lift Tables; 30" x 30"
1- Presto Model M366 1,000-Lb. Capacity Die Lift, S/N 70552; 18" Load Center
1- Factory Cat Model 34 Walk-Behind Electric Floor Scrubber, S/N 34-11309
1- Nissan Model GYM02L258 5,000-Lb. Electric Lift Truck, S/N JYM02-001644,
(1998); 187" Lift Height, Solid Tire
MISCELLANEOUS
1- Xxxxxxx Model R065LC261D266C218A59 6-Ton Trim Press, S/N 21108, Asset #22,
(1969); Hydraulic, Gap Frame; (Out of Service)
1- Xxxxxxx Model S065MC261D267C221A59S206 6-Ton Trim Press, S/N 20642, Asset
#18, (1967); Hydraulic, Gap Frame; (Out of Service)
1- Lot of Miscellaneous Machine Accessories and Factory Equipment, To
Include: Jib
Cranes; Wire Tainers; Pallet Jacks; Work Benches; Shop
Furniture; Pallet Rack; Dump Hoppers; Bench Vises; Miscellaneous Hand and
Power Tools; Miscellaneous Spare and Repair Parts; Miscellaneous Not in
Use Equipment; Storage Cabinets; Fans; Pipe Threader; Oxy Acetylene Torch
Sets; Floor Sweeper; Miscellaneous Maintenance Equipment; QPC Mold
Temperature Controllers; QPC Water Cooling Towers; Cooling Carousel;
Ladders; Miscellaneous Inspection Equipment; Miscellaneous Secondary
Equipment; Rotary Shrink Wrapper; Battery Chargers; Miscellaneous
Perishable Tooling; Lockers; Cafeteria Furniture; etc.
1- Xxxxxxx Model 6080 Walk-Behind Electric Floor Scrubber, S/N Unknown; 1,091
Hours Indicated
1- Kard Model TP-30-4 30-Ton Press, S/N TK-1064; (Currently Not In Service)
1- Xxxxxxx Model GC10C09C23A68A61A46 10-Ton Press, S/N 6484-A54S05, 7-1/2 hp
1- Xxxxxxx 8-Ton Press, S/N Unknown; Estimated 8 Ton Capacity
1- Xxxxxxx 6-Ton Press
1- Ridgid Model 500 Pipe Threader, S/N Unknown
1- Weldotron Model 7121 7-kW Shrink Tunnel, S/N EL84471; Electric, 14"; (Not
In Service)
1- Sioux Model 180C Steam Cleaner, S/N 9907031, (1999); 30,000 Btus
1- Delta 2,200-psi Pressure Washer, S/N Unknown; with 4.5 hp Honda Model
GCV135 Gasoline Engine
1- Xxxxxxxx Model 1637 Drill Press, S/N 115789; 8" Throat
1- Lot of Machinery and Equipment Stored in Warehouse, To Include: Drill
Presses; Disc Xxxxxxx; Arbor Presses; Dust Collectors; etc.
1- Lot of Office Furniture and Business Machines
1- Genie Model Z25-8 25' Aerial Lift, S/N 188, (2000); 500-Lb. Capacity
1- Tiocco Model T-3000-FRS Hydraulic Fluid Filter, (2003)
1- Xxxxxxxxx-Xxxx Model 2545E10VFP 35-CFM Reciprocating Air Compressor, S/N
0308080102, (2003), 10 hp; with Air Cooled Aftercooler
MAINTENANCE
1- Demco Model KE Floor-Type Drill, S/N 43063; 9" Throat, 16" x 16" Worktable
1- Manufacturer Unknown H-Frame Press, S/N Unknown; 28" Between Posts; with
Enerpac Hydraulic Press
1- Lincoln Model Power Mig 200 200-Amp. Welder, S/N K1766-1 10564
M1011020568; 200 Amps @ 30% Duty Cycle; with Cart
1- Milwaukee Model 6175 Cut-Off Saw, S/N 99111774; 16"D Grinding Wheel
1- Manhattan Model 951230 Floor-Type Drill, S/N 58289, 1/2 hp; 8" Throat,
14"D Worktable
1- Lincoln Model Idealarc 250 250-Amp. Welder, S/N AC-307876, (1973); 140
Amps @ 100% Duty Cycle
1- Apex 16"D Disc Sander, 3 hp; Model and S/N Unknown;
1- Lot of Factory and Support Equipment
QC LAB
1- Xxxxxxxx 36"D x 48"L x 8"H Granite Surface Plate
1- Arun Technologies Model Series 2000 Spectrometer; with Monitor; and
Printer
1- Xxxxxxxx Model PRS-150 X-Ray Machine; with X-Xxx Xxxxx; Power Supply;
Model MGC-23 Controls; and Ikegami Monitor
1- Gauge Master Model Series 80-89/GMX 22" Optical Comparator, S/N 3772590,
(1993); with Gage Master GMX 2-Axis Digital Readout
1- Xxxxx & Xxxxxx Model MicroXcel UHA Coordinate Measuring Machine, S/N
1196-3431, (1996); 28" X-, 45" Y-, and 25" Z-Axis Travel, 33" x 53" x 4"
Granite Worktable; with Xxxxxxxx XX0X Probe; PC Controls; and Xxxxx &
Xxxxxx Software
1- Manufacturer Unknown 48"D x 60"L x 8"H Granite Surface Plate
1- Sheffield Model Cordax 1808 Coordinate Measuring Machine, S/N 249671085;
27" X-, 25" Y-, and 17" Z-Axis Travel, 30"D x 54"L x 8"H Granite Surface
Plate; with Renishaw TP1S Probe; Digital Readout; and Smart Terminal
Software, Version 2
1- Lot of Miscellaneous QC Lab Equipment, To Include: Edmunds Air Gauges; Pin
Gauge Sets; Gauge Block Sets; Height Gauges; Laser Xxxx; Video Camera;
Furnishings; PC's; Micrometers; Plotter; Blue Print Copier; Plug Gauges;
etc.
1- Hewlett Packard Model 7595A Draftmaster I Plotter, S/N 2644A00891
1- Visi-Trak Model True Trak 2020/M91-6002 Monitor and Analysis System, S/N
95002
1- 3M Model 500 Microfilm Reader/Printer
OFFICE
1- Lot of Office Furniture and Business Machines, To Include, But Not Limited
To: Desks; Chairs; File Cabinets; Tables; Televisions; Overhead
Projectors; Calculators; Typewriters; Teleconferencing Equipment;
Cabinets; Partitions; Breakroom Furniture; etc.
1- Lot of Computer and Peripheral Equipment, To Include: Personal Computers;
File Servers; Monitors; Printers; Facsimile Machines; Photocopiers;
Network Communications Equipment; etc.
WAREHOUSE
1- X.X. Xxxxxx Model DCT-28 28-Ton Trim Press, S/N 2494, (1968);
(Remanufactured By EPCO In 2000), with Light Curtain
1- Keystone 30-Ton Trim Press, S/N 3904, (1995); Hydraulic, 4-Post, Upacting,
24" x 36" Between Posts; with Self-Contained Hydraulic Power Supply (Not
in Service; Operable)
1- Keystone 35-Ton Trim Press, S/N 005, (1987); Hydraulic, 4-Post, Upacting,
24" x 36" Between Posts
1- Xxxxxxx Model S065MC281C221C224 6-Ton Trim Press, S/N 15884-A72A59,
(1960), 5 hp; Hydraulic, Gap Frame, 18" Daylight, 7" Throat, 12" Stroke,
3.25" Cylinder Bore
1- Xxxxxxx Model GC10C09C23A68A61A46 10-Ton Trim Press, S/N 6483-A54S05,
(1951); Hydraulic, Gap Frame (Currently Not in Service; Operable)
1- Xxxxxxx Model 6484 10-Ton Trim Press; Hydraulic, Gap Frame
1- Xxxxxxx Model GC10C61D15A68 10-Ton Trim Press, S/N 13825; Hydraulic, Gap
Frame
2- Mid-West Tool 6-Station Indexing Machining Centers, S/N 273; Each Station
with (2) Sugino Drill Heads; and Xxxxx-Xxxxxxx Model PanelView 550 PLC
Controls; (1 Located Off Site)
1- X.X. Xxxxxx Model DCT-28 28-Ton Trim Press, S/N 2629, (1970); Hydraulic,
4-Post, 24" x 36" Between Posts; (Remanufactured 2000)
1- Duracraft Model 45161 16" Single-Spindle Floor-Type Drill, S/N Not
Available
1- Lincoln Model DPF1658-2 16" Single-Spindle Floor-Type Drill, S/N 522805,
(1992)
1- Xxxxxxxx Floor-Type Drill; (Tags Painted)
1- Bridgeport Vertical Milling Machine, S/N J97046, (1955); 80 to 2,720-rpm
Spindle Speeds, 9" x 42" Table; with Specially Manufactured Work Fixture
1- Spin Blast Shot Blast Machine; Spinner Hanger Type, 60" x 48" x 72", 6,428
Hours Indicated; with Reclaim and Outside Dust Collector; (Currently Not
in Service; Operable)
1- Xxxxx Model GCS20MB 4,000-Lb. LP Gas Lift Truck, S/N G138MB-1127-6920KOF,
(1987); 188" Lift Height, Solid Tire; (Currently Not in Service; Not
Operable)
1- Dayton Model 6H011B 1,400-psi Steam Cleaner, S/N C24015;
2.2-Gallons/Minute, 229,000-Btus/Hour
EXHIBIT A
RELEASE AND TERMINATION OF LIENS
Reference is hereby made to the Loan and Security Agreement, dated
as of December 18, 2003 (as heretofore amended or otherwise modified and as
further amended, modified, supplemented, extended, renewed, restated or
replaced, the "Loan Agreement"), by and among Lexington Precision Corporation
("LPC") and Lexington Rubber Group, Inc. ("LRG"), as Borrowers (LPC and LRG,
each a "Borrower" and, collectively, the "Borrowers"), the lenders from time to
time party thereto (the "Lenders"), and Ableco Finance LLC, in its capacity as
agent for the Lenders (in such capacity, the "Secured Party"). The Secured
Party, on behalf of itself and the Lenders, holds a security interest in and
lien on the assets and property of LPC. The Secured Party and the Lenders have
been advised that LPC is selling, conveying, transferring and assigning to
Premier Tool & Die Cast Corp. or an affiliate thereof ("Buyer") certain assets
consisting of the equipment and inventory listed on Schedule I attached hereto
("Purchased Assets"), located at LPC's Lexington Die Casting Division in
Lakewood, New York. As a condition to such proposed sale, the Secured Party is
required to release all of its liens on such Purchased Assets.
1. Release of Security Interest. Effective upon receipt by the
Working Capital Agent (as defined below) of the payment set forth in Section 2
hereof, the Secured Party hereby releases, terminates and discharges, without
recourse and without any representation or warranty of any kind, express or
implied, all security interests and liens of any nature whatsoever in its favor
in or on the Purchased Assets. Nothing contained herein shall be deemed a
release or termination by the Secured Party of any security interests in and
liens on any assets of any Borrower other than the Purchased Assets, all of
which shall continue in full force and effect. Except as specifically set forth
herein, nothing contained herein shall be construed in any manner to constitute
a waiver, release or termination or to otherwise limit or impair any of the
obligations or indebtedness of any Borrower or any other person or entity to the
Secured Party and the Lenders, or any duties, obligations or responsibilities of
the Borrowers or any other person or entity to the Secured Party and the
Lenders.
2. Effectiveness of Release. The release, termination and discharge
of the Secured Party's security interests in and liens on the Purchased Assets
pursuant to Section 1 hereof shall be effective, without further action by the
Secured Party, upon the Working Capital Agent's receipt, from or on behalf of
the Borrowers (including by direct payment by the Buyer), of the Initial Payment
and the Inventory Purchase Price (each as defined below) in an aggregate amount
of not less than $2,452,000 in immediately available funds in a bank account of
the Working Capital Agent specified in writing by the Working Capital Agent to
the Borrowers.
3. Further Assurances. The Secured Party hereby agrees that, after
receipt of the payment set forth in Section 2 hereof by the Working Capital
Agent, it will file, at the Borrowers' sole cost and expense, a UCC financing
statement amendment in the form attached hereto as Annex A. The Secured Party
will, at the reasonable request of the Borrowers and after receipt of the
payment set forth in Section 2 hereof by the Working Capital Agent, execute
and/or deliver such instruments and other writings as may be necessary to effect
or evidence the termination of the liens of the Secured Party on the Purchased
Assets, but without representation,
warranty or recourse to the Secured Party or the Lenders and at the sole cost
and expense of the Borrowers.
4. Definitions: As used herein, the following terms shall have the
following meanings:
"Initial Payment" means that portion of the purchase price
being paid in cash on the date hereof by Buyer for the Purchased Assets (other
than any Purchased Assets constituting inventory) in an aggregate amount of not
less than $2,360,000.
"Inventory Purchase Price" means the purchase price being paid
in cash on the date thereof by Buyer for the Purchased Assets constituting
inventory in an aggregate amount of not less than $92,000.
"Working Capital Agent" means Wachovia Bank, National
Association, as successor by merger to Congress Financial Corporation, in its
capacity as agent under the Amended and Restated Loan and Security Agreement,
dated as of December 18, 2003, by and among the Borrowers, Wachovia Bank,
National Association, as successor by merger to Congress Financial Corporation,
as agent, The CIT Group/Business Credit, Inc., as co-agent, and the lenders from
time to time party thereto, as amended.
5. Miscellaneous. Delivery of an executed counterpart of this
Release and Termination of Liens by facsimile or electronic mail shall be
equally effective as delivery of a manually executed counterpart. This Release
and Termination of Liens shall be governed by and interpreted and determined in
accordance with the laws of the State of New York (without regard to principles
of conflict of laws).
[REMAINDER OF PAGE INTENTIONALLY LEFT BLANK.]
IN WITNESS WHEREOF, the undersigned has duly executed this
instrument as of August __, 2005.
ABLECO FINANCE LLC, as Secured Party and on behalf
of the Lenders
By: ________________________________________
Name: ______________________________________
Title: _____________________________________
SCHEDULE I TO RELEASE
PURCHASED ASSETS
1. All inventory of Lexington Precision Corporation's Die Casting Division
consisting of metals, packaging and pallets located at Lexington Precision
Corporation's facility at 000 Xxxxxxxxxx Xxxx, Xxxxxxxx, XX on the date hereof,
to the extent sold to Buyer pursuant to the Purchase Agreement.
2. The following machinery and equipment:
One (1) HPM Model D-1000-A 1,000-Ton Aluminum Cold Chamber Die Cast Machine, S/N
R95356/64-088, including:
(1) Rimrock Multi-Link Auto Reciprocator/Die Sprayer
(1) Advance Model SL-1200 Automatic Ladler, S/N 31524-98, (1998)
(1) Rimrock Multi-Link Extractor
(1) MPH 5,000-Lb. Gas-Fired Holding Furnace, S/N 6094-82; with
Temperature Controls
One (1) HPM Model D-1000-A 1,000-Ton Aluminum Cold Chamber Die Cast Machine, S/N
R98176/65-151, including
(1) Rimrock Multi-Link Auto Reciprocator/Die Sprayer
(1) Rimrock Model 305 Multi-Link Automatic Ladler
(1) Rimrock Multi-Link Extractor
(1) Firebrand 3,500-Lb. Gas-Fired Holding Furnace, S/N 9038, with
Temperature Controls
One (1) Prince Model 836 CCA 800-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx,
XX0000 including:
(1) Advance Model SR-1150 Automatic Reciprocator/Die Sprayers
(1) Advance Model SL-1500 Automatic Ladler, S/N 32070-99
(1) ABB Type IRB4400-M98 Industrial Robot, S/N 44-12809
(1) O'Brien/Xxxx Model PD512-00 3,500-Lb. Gas-Fired Holding Furnace, S/N
20006-01
One (1) Prince Model 836 CCA 800-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx,
XX0000, including:
Advance Model SR-1150 Automatic Reciprocator/Die Sprayers
Advance Model SL-1500 Automatic Ladler, S/N 3019-00
(1) ABB IRB4400 M2000 Industrial Robot, S/N 44-20742
(1) Seco/Warwick 3,200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
FSR-954-95
One (1) Idra Model OL-700 770-Ton Aluminum Cold Chamber Die Cast Machine, S/N
7187 including:
(1) Rimrock Automatic Extractor/Die Sprayer
(1) Rimrock Ladler S/N C10113
(1) Seco/Warwick 3,200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
FSR-956-95
One (1) Idra Model XX-000 XXXX 000-Xxx Aluminum Cold Chamber Die Cast Machine,
S/N 6932, including:
(1) Rimrock Automatic Extractor/Sprayer
(1) Rimrock Model 405 Automatic Ladler, S/N 6231
(1) O'Brien & Xxxx Model ND514-99 1,500-Lb. Gas Fired Aluminum Holding
Furnace, S/N 20017
One (1) Prince Model 836 CCA 800-Ton Aluminum Cold Chamber Die Cast Machine, S/N
DA1038, including:
(1) Advance Model SR1150 Automatic Reciprocator/Die Sprayer, S/N 3018-00
(1) Advance Model SL-1500 Automatic Ladler, S/N 32101-00
(1) ABB Type IRB4400M2000 Industrial Robot, S/N 44-21383
(1) Seco/Warwick 3,200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
F-628-95
MELT ROOM
1- O'Brien & Xxxx Model MD127-98 Xxxx Xxxxxxx, X/X 00000-0, Xxxxx #3, (1999);
Vertical, Stack Type; with 84" x 48" x 24" Deep Conveyor Shaker; Mayfran
36"W x 15"L Elevated Scrap Conveyor, with Stack Shaker; Gas-Fired
Stack-Type Melting Furnace, 72"D x 60"H, with (3) Burners, Rotating Base,
Structural Steel Supports, and Mezzanine; Operator Control Panel, with
Xxxxx-Xxxxxxx Model PanelView 550 PLC Controls; and Digital Temperature
Controllers
1- MPH Model ACM-2000 20,000-Lb. Capacity Xxxxxxxxxxxxx Xxxxxxx, X/X 0000-00,
Xxxxx #0, (1979); Aluminum, Melt, 5,000,000-Btus Input, 2,000(degree)F
Maximum Temperature, Gas Fired; with Epic Burners; North American Control
Panel, with Digital Temperature Controllers; and Single Door, with
Pneumatic Lift; (Refractory Brick Rebuilt 2001)
1- MPH Model ACM-2000 20,000-Lb. Xxxxxxxxxxxxx Xxxxxxx, X/X 000-00, Xxxxx #0,
(1974); Aluminum, Melt, 5,000,000-Btus Input; 2,000(degree)F Maximum
Temperature, Gas Fired; with Epic Burners; North American Control Panel,
with Digital Temperature Controllers; and Single-Swing Open Door;
(Refractory Brick Replaced 1994; Refractory Brick Rebuilt 2001)
1- Amcor Injecta Model II Fluxing Machine, S/N 66-201, (1966); with Xxxxx
Gas-Fired Charging Stand; Carts; and Tanks
DIE XXXX XXXX
0- Xxxxxx-Xxxxxxxxx Xxxxxxxxx 60-Ton Trim Press, S/N 1169; Hydraulic, 4-Post,
90" x 32" Between Posts
1- Manufacturer Unknown 35-Ton Hydraulic Trim Press; 4-Post, Downacting, 26"
x 42" Between Posts; with Self-Contained Hydraulic Power Supply; and
Safety Light Curtains; (Remanufactured By Keystone In 2000)
1- Roto-Finish 96"D Vibratory Finisher, S/N Unknown; with Powered Cleated
Belt Infeed Conveyor
1- X.X. Xxxxxx Model DCT-38 38-Ton Trim Press, S/N 10980-001, (1985);
Hydraulic, 4-Post, Downacting, 40" x 26" Between Posts; with
Self-Contained Hydraulic Power Supply
1- Roto-Finish 96"D Vibratory Finisher, S/N Unknown, Asset #4
1- Manufacturer Unknown 35-Ton Hydraulic Trim Press, S/N Unknown; 4-Post,
Downacting, Estimated 26" x 42" Between Posts; with Self-Contained
Hydraulic Power Unit; and Safety Light Curtain
1- Roto-Finish Model Multi-Pass 96"D Vibratory Finisher, S/N Unknown
1- Roto-Finish Model Multi-Pass 96"D Vibratory Finisher, S/N MP-94-5-4-96-A2,
(1996); Job #3822
1- Xxxxxx 700-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 0000, Xxxxx #7,
(1983); (Remanufactured By EPCO In 1994); Epco S.O. #9429, T-Slot Platen,
Interface Shot End, Solid Frame Shot End Connection; with Safety Ratchets;
Hydraulic Ejector; Xxxxx-Xxxxxxx Model PanelView 550 PLC Controls; Visi
Trak True Trak 2020 Monitor; and Analysis System, To Include:
(1) Rimrock Extractor/Sprayer
(1) Rimrock Multi-Link Ladler
(1) Onex
(1) Mesh Belt Air Cooling Conveyor
(1) Manufacturer Unknown 1,500-Lb. Gas-Fired Holding Furnace
1- Roto-Finish Model Spiratron 72"D Vibratory Finisher, S/N ER-1822S-96-C8,
(1996); Job #3814
1- Xxxxxx 700-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 0000, Xxxxx #8;
(Estimated 1960s); Epco S.O. # 9056; (Remanufactured by EPCO 1990); T-Slot
Platens, Interface Shot End, Solid Frame Shot End Connection; with Safety
Ratchets; Solid Frame Tie Bar Pullers; Hydraulic Ejector; and Xxxxxxx
SCS-2000 Shot Control System; To Include:
(1) Rimrock Extractor/Sprayer
(1) Rimrock Model 305 Multi-Link Automatic Ladler
(1) Manufacturer Unknown 500-Lb. Gas Fired Holding Furnace
(1) Steel Mesh Belt Air Cooling Conveyor
1- Roto-Finish Model Spiratron 72"D Vibratory Finisher, S/N Unknown
1- Xxxxxx 800-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 000, Xxxxx #9,
(1964); (Remanufactured By EPCO In 1991); Epco S.O. #9137, 50"V x 50"TH
T-Slot Platen, 35"H x 36"V Die Clearance, 18" Minimum Daylight, 36"
Maximum Daylight, 0-10-Shot Position, 28" Stroke, Motorized Die Height
Adjustment, Closed Loop Shot End, 3-Bar Shot End Connection; with Safety
Ratchets; Hydraulic Ejector; Xxxxx-Xxxxxxx Model PanelView 550 PLC
Controls; and Xxxxxxx SCS-2000 Shot Control System, To Include:
(1) Rimrock Model 195 Extractor/Sprayer
(1) Rimrock Model 465 Multi-Link Automatic Ladler
(1) Manufacturer Unknown 1,000-Lb. Gas-Fired Holding Furnace
(1) Steel Mesh Belt Air Cooling Conveyor
0- X. X. Xxxxx Xxxxx XXX-00-0000 30-Ton Trim Press, S/N 0000-000-000, (1979);
Hydraulic, 4-Post, Downacting, 30" x 42" Between Posts; with
Self-Contained Hydraulic Power Supply
1- Roto-Finish 96"D Vibratory Finisher, S/N Unknown
1- Xxxxxx 600-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 0000, Xxxxx
#11; (Remanufactured By EPCO In 1991); Epco S.O. #9136, 47"V x 40"TH
T-Slot Platen, 28.5"H x 28.5"V Die Clearance, 18" Minimum Daylight, 28"
Maximum Daylight, 0-
6-Shot Position, 17.5" Stroke, Motorized Die Height Adjustment, Interface
Shot End, Solid Frame Shot End Connection; with Safety Ratchets; Hydraulic
Ejector; Visi-Track True Trak 2020 Monitor, and Analysis System, To
Include:
(1) Shotbeads Sprayer
(1) Rimrock Automatic Extractor
(1) Xxxxx Automatic Ladler
(1) Manufacturer Unknown 800-Lb. Gas-Fired Holding Furnace;
(Furnace Currently in Maintenance; Currently Not in Service;
Operable)
(1) B.C. Fabricators Steel Mesh Belt Air Cooling Conveyor
1- Xxxxxx 1,200-Ton Aluminum Cold Chamber Die Xxxx Xxxxxxx, X/X 00000, Xxxxx
#12, (1964); (Shot End Rebuilt In 2000); 65"V x 65"TH T-Slot Platen, 42"H
x 42"V Die Clearance, 10.2" Minimum Daylight, 30" Maximum Daylight,
2-12-Shot Position, 30" Stroke, Interface Shot End, 2-Bar Shot End
Connection; with Safety Ratchets; Visi Trak True Trak 2020SX Monitor, and
Analysis System, To Include:
(1) Rimrock Model 195 Extractor/Sprayer
(1) Rimrock Multi-Link Ladler (Maintenance Shop)
(1) Seco/Warwick 3200-Lb. Gas-Fired Aluminum Holding Furnace, S/N
FSR-955-95; 47"W x 81-1/2"L x 18"H, 2,000(degree)F Maximum
Temperature; with Digital Temperature Controller
(1) Steel Mesh Belt Air Cooling Conveyor (Scrap)
(Currently Not in Service; Inoperable)
1- Sweco 60"D Vibratory Finisher, S/N Unknown; with Soundproof Lid
1- New Xxxxxxx Xxxx Wringer, S/N Not Available; 24" Diameter x 00" Xxxxx
0- Xxxxxxxx Xxxxxx Xxxxx, S/N 98025, (1998); 7-1/2 Ton x 60' Span, Single
Girder, Top Running, Overhead, Electric, Traveling; with Konecranes Model
XL400 Electric Cable Hoist; and Pendant Control
1- Platnick 5-Ton Bridge Crane, S/N 95037, (1995); 60' Span, Single Girder,
Top Running, Overhead, Electric, Traveling; with Konecranes Model XL300
Electric Cable Hoist; and Pendant Control
1- Kitamura Model Mycenter-0 Vertical Xxxxxxxxx Xxxxxx, X/X 00000, Xxxxx
#5104, (1997); Dual, 12" x 18", 1" Tables, 130-Lb. Table Load Capacity,
12" X-, 10" Y-, and 12" Z-Axis Travel, 5.3" to 17.3" Distance From Table
Surface to Spindle Nose, 7.8" to 17.8" Distance From Column to Table
Center Line, #30 Taper, 80 to 8,000-rpm Spindle Speeds, 3 hp Spindle
Drive; with Spare Changer Automatic Pallet Changer; 16-Position Automatic
Tool Changer, with Asst. #30 Taper Tool Holders; Kitamura Yasnac CNC
Controls; and (2) Model 10 HC Custom Designed and Fabricated 10-Cell Multi
Collet Work Hold Fixtures
3- 3-Ton Jib Cranes; Each with 3-Ton Capacity Chain Hoist, Pendant Controlled
1- Spanco 5-Ton Jib Crane, S/N 0208205; with Xxxx-Box 5-Ton Capacity Cable
Hoist,
Pendant Controlled
1- 5-Ton Jib Crane; with Xxxxxx 5-Ton Capacity Chain Hoist, Manual
1- Xxxxxxxx Model RG Rotoblast Shot Blast Machine, S/N 140-2RG1-681; 22" x
30", Tumblast; with Reclaim Elevator; and Xxxxxxx Model DK-1055
(Duskolector) Bag-Type Dust Collector, 4-Bag; (Overhauled In June 2003)
1- BAC Model VTO-065-J Cooling Tower, (2003); Rooftop Mounted
MACHINING
1- Jet Model JDP-20MF 20" Single-Spindle Floor-Type Drill, S/N 7030560
1- Mfr. Unknown 16" Single-Spindle Floor-Type Drill; with Multi-Spindle Drill
Head
1- Delta Rockwell 16" Single-Spindle Floor-Type Drill
1- 8" Single-End Wire Wheel Buffer
1- Xxxxxxxx Model 1667 16" 2-Spindle Production Drill, S/N 517856
1- Lincoln Model DPF1658-2 16" Single-Spindle Floor-Type Drill, S/N 522795,
(1992)
1- Xxxxxxxx Model 1635 16" 4-Spindle Production Drill, S/N 118087
1- Enshu Model Type XX-XX Vertical CNC Xxxxxxx Xxxxxx, X/X 000, Xxxxx #0,
(1994); 16" x 27-1/2" Table, 23" X-, 16" Y-, and 16" Z-Axis Travel, 120 to
12,000-rpm Spindle Speeds, 7.3 hp, #30 Taper; with ENAC-1 CNC Control
1- Xxxxxxx Model R065LC26ID266C218A59S220 6-Ton C-Frame Press, S/N 21063,
(1968)
1- Enshu Model Type XX-XX Vertical CNC Xxxxxxx Xxxxxx, X/X 000, Xxxxx #0,
(1994); 16" x 27-1/2" Table, 23" X-, 16" Y-, and 16" Z- Axis Travel, 120
to 12,000 rpm Spindle Speeds, 7.3 hp, #30 Taper; with ENAC-1 CNC Control;
and Xxxx Rotary Indexer
1- Xxxxxxxx Granite Surface Plate; 18" x 24" x 4" Table Size
1- Xxxxxxxx 12" x 18" x 4" Granite Surface Plate
1- Manufacturer Unknown Aluminum Belt Sander; 3" Belt; with Dust Collector
1- Mid-West Tool Custom Designed and Fabricated Brushing Press, S/N 246
1- Xxxxxxxx Model 2224 20" Single-Spindle Production Drill, S/N 106932
1- Custom Designed & Fabricated Horizontal and Vertical Drilling Machine;
with
Production Table
1- Duracraft Model 45161 16" Single-Spindle Floor-Type Drill, S/N G03599,
(1987)
1- Enco Model DS-20 20"D Disc Sander, S/N 8160, (1984), 2 hp; (Currently Not
in Service; Operable)
1- Bridgeport Vertical Milling Machine, S/N J107727, (1967), 1 hp; 80 to
2,720-rpm Spindle Speeds, 9" x 42" Table
0- Xxxxxx Xxxxx Grinder, S/N Unknown
1- Specially Manufactured Horizontal Drilling Machine
1- Specially Manufactured Horizontal Drilling Machine
1- Bridgeport Vertical Milling Machine, S/N J15328, 1 hp; 80 to 2,720-rpm
Spindle Speeds, 9" x 42" Table; with Specially Manufactured Work Fixture
1- Xxxxxxxx Model 1667 16" Single-Spindle Production Drill, S/N 516547
1- Takisawa Model TC-2 CNC Lathe, S/N THRMU5947, (1985); 7.37 hp, 20" Swing;
with 8-Position Turret; and Fanuc CNC Controls
1- Seibu Model SNC-200UP Horizontal CNC Chucker, S/N 0-00000-0; 8" Swing, 5"
x 12" T-Slot Worktable; with Xxxxxx Xxxxx; Fanuc Series O-T CNC Control;
and Oilmatic Model KTVM-5C-HM1 Automatic Oil Temperature Regulator
1- Seibu Model SNC-200UP Horizontal CNC Chucker, S/N 0-00000-0; 8" Swing, 5"
x 12" T-Slot Worktable; with Xxxxxx Xxxxx; Fanuc Series O-T CNC Control;
and Oilmatic Model KTVM-5C-HM1 Automatic Oil Temperature Regulator
1- Mitutoyo 48" x 72" x 10" Granite Surface Plate, S/N 2505-1
1- Lot of Factory and Support Equipment For Both Machining and Tool Room
1- Hitachi Seiki Model HT20SII CNC Turning Center, S/N 2843, Asset #785,
(1995), 15 hp; CNC, 2-Axis, 5,000-rpm Spindle Speeds, 15" Maximum Swing,
8-1/4" Maximum Turning Diameter, 15" Maximum Turning Length, 2" Bar
Capacity; with 10-Position Turret; Xxxxxx Xxxxx; Aercology Mist Collector;
Elevated Chip Conveyor; and Seiki Multi CNC Control
1- Sugino Model ES2-2-3060 Self Feeder, S/N J11DA301219, (2004); with Xxxxxx
Xxxxx; and Level Clamp
1- Ultraline 6" W x 6' L Inclined Nose Over Conveyor, (2004); Variable Speed
1- Powermatic Model 1100 Drill Press, S/N 0-1186-1
TOOLROOM
1- Wellsaw Model 1118 Horizontal Band Saw, S/N 2599; 30" Part Width Capacity,
12" Throat
1- Carlton 3' x 10"D Radial Arm Drill, S/N Unknown; 36 to 1,500-rpm Spindle
Speeds; with 18" x 24" Drill Box Table; and 36" x 42" T-Slot Platform, 30"
Vertical Travel
1- Xxxxxxx 3-Ton Chain Hoist; Pendant Controlled
1- Xxxx Model 75H 75-Ton Capacity Hydraulic H-Frame Press, S/N 140208,
(1960); 44" Between Posts
1- Lincoln Model Tig 300/300 300-Amp. Welder, S/N AC-586982, (1984); with
Dyna-Flux Chiller
1- Lincoln Model Square Wave Tig 175 175-Amp. Welder, S/N 01330-41980612459,
(1988)
1- Bridgeport Variable-Speed Vertical Milling Machine, S/N 133804, (1951); 60
to 4,200-rpm Variable Spindle Speeds, 9" x 48" Table; with Bausch & Lomb
Acu-Rite II 3-Axis Digital Readout; and Machinists Vise
1- Bridgeport Vertical Milling Machine, S/N 58781, (1962), 1 hp; 80 to
2,720-rpm Spindle Speeds, 9" x 48" Table; with Teledyne Xxxxxx Pathfinder
2-Axis Digital Readout
1- Bridgeport Vertical Milling Machine, S/N 105568, (1967), 1 hp; 80 to
2,720-rpm Spindle Speeds, 9" x 48" Table
1- South Bend Model CL8117C Toolroom Lathe, S/N 8668HKX12; 16" Swing, 52"
Bed, 38" Between Centers, 1-1/2" Hole Through Spindle; with Threading
Attachment
1- Millport Model SJ-1760G Engine Lathe, S/N 840517, (1984); 17" Swing, 80"
Bed, 60" Between Centers, 2" Hole Through Spindle; with Threading
Attachment
1- Standard-Modern Model Utilathe Series 2000 Toolroom Lathe, S/N 3873; 50 to
1,500-rpm Spindle Speeds, 13" Swing, 42" Bed, 30" Between Centers, 1-1/2"
Hole Through Spindle
1- Cincinnati Xxxxxxxx Model Super Service 28" Single-Spindle Production
Drill, S/N 3L414; 14" Throat, 18" x 28" T-Slot Worktable; with Machinists
Vise
1- Motor-Xxxx Model MA6 Single-Spindle Production Drill, S/N MA581; 12"
Throat, 21" x 22" Worktable
1- Xxxx Model NS18 18" Vertical Band Saw, S/N 7311, (1953); 24" x 24"
Worktable; with Blade Welding and Grinding Attachment
1- Supermax Model YC-2VA Vertical Milling Machine, S/N 061165, (1983), 2 hp;
75 to 3,600-rpm Spindle Speeds, 8" x 42" T-Slot Worktable, Belt-Driven
Head; with Xxxxx Xxxx Control
0- Xxxxxx Xxxxxxxx Xxxxx 00XX Hardness Tester, S/N 2233-1285
1- Parts Washer; 22" x 32"
1- Xxxxxxxx 16" x 24" x 4" Granite Surface Plate, S/N 619755
1- Xxxxxxx Model 142L Gas-Fired Furnace, S/N 2846; 180-BTU Maximum Input
1- Xxxxxxxxx Model FSG-618 Surface Grinder, S/N A277A040, 1 hp; Hand Feed, 8"
Grinding Wheel; with 6" x 18" Permanent Magnetic Xxxxx
1- Baldor 6" Double-End Carbide Tool Grinder
1- Xxxxxx Model 375 Drill Grinder
1- Abrasive Machine Tool 6" x 18" Surface Grinder, S/N 317; Hand Feed, 12"
Grinding Wheel; with 6" x 18" Permanent Magnetic Xxxxx
1- Xxxxx 10" x 16" Surface Grinder, S/N 17H-5022; Hydraulic Feed, 12"
Grinding Wheel; with 10" x 16" Permanent Magnetic Xxxxx
1- Lincoln Model DS-20 20"D Disc Sander, S/N 402000, (1994), 2 hp; 1,720
Maximum rpm
1- Grieve Model B1-650 Bake Oven, S/N 14188; Drive-In, 64"W x 80"D x 82"H
1- Zero Model BNP55-6 2-Hole Spin Blast Cabinet, S/N 22535; 42"L x 24"D x
30"H; with Dust Collector
1- Atlas Copco Model GAU707 Rotary Screw Air Compressor, S/N ARP878018,
(1987), 75 hp; with Vertical Air Receiver Tank; and Arrow Pneumatics
Compressed Air Dryer
1- Xxxxxxxxx-Xxxx Model SSR Rotary Screw Air Compressor, S/N N0293, (1993),
50 hp; 44,514 Hours Indicated; with Vertical Air Receiver Tank
1- Atlas Copco Xxxxx XX00 Rotary Screw Air Compressor, S/N Unknown, 75 hp;
Approximately 50 hp; 181 Maximum psig, 57,650 Hours Indicated
1- Xxxxxxxx Model HPRP500 Air Dryer, S/N WH500A4600006110; 200 Maximum psig
1- Van Air Model EMD400-A 400 CFM Air Dryer, S/N 97-7948K-4, (1997), 2 hp;
350 Maximum psig
1- Sullair Model LS20-100SL/W/SUL Rotary Screw Air Compressor, S/N
003-122520, (2000), 100 hp; 110 Maximum psig
1- Manufacturer Unknown 30"D x 48"L x 7"H Granite Surface Plate, S/N 1129
1- Xxxxx Model Super 612 6" x 12" Surface Grinder, S/N 47019, (2003);
w/Accu-Rite Qwick Xxxxx XXX
0- Xxxxxxxxx Xxxxx XXX-0000-0 Magnetic Drill, (2000)
MATERIAL HANDLING
1- Yale Model GLC030BFNUAE076 3,000-Lb. LP Gas Lift Truck, S/N A809N05573V,
(1998); 171" Lift Height, 3-Stage Mast, Solid Tire, 5,310 Hours Indicated;
with Side Shift
1- Hyster Model J35B 3,500-Lb. Electric Lift Truck, S/N BI60V02518N, (1992);
118" Lift Height, 2-Stage Mast, Solid Tire, 6,975 Hours Indicated; with
Side Shift
1- Yale Model ESC020ABN24SV083 2,000-Lb. Stand-Up Rider-Type Electric Lift
Truck, S/N A824N06364U, (1997); 126" Lift Height, Single Mast, Solid Tire,
1,945 Hours Indicated
1- Xxxxx Model GCX25 5,000-Lb. LP Gas Lift Truck, S/N CX2300588-8805KOF,
(1992); 205" Lift Height, Solid Tire, 4,401 Hours Indicated; with Side
Shift
1- Hyster Model S120E 12,000-Lb. Capacity LP Gas Lift Truck, S/N C004D08624G,
(1986); 182" Lift Height, 3-Stage Mast, Solid Tire, 5,477 Hours Indicated
2- Big Xxx Model 52A Die Lifts, S/N 1120; and X/X Xxxxxxx
0- Xxx Xxx Xxxxx 00000X 1,000-Lb. Capacity Electric Die Lift
5- Lexco Die Lift Tables; 30" x 30"
1- Presto Model M366 1,000-Lb. Capacity Die Lift, S/N 70552; 18" Load Center
1- Factory Cat Model 34 Walk-Behind Electric Floor Scrubber, S/N 34-11309
1- Nissan Model GYM02L258 5,000-Lb. Electric Lift Truck, S/N JYM02-001644,
(1998); 187" Lift Height, Solid Tire
MISCELLANEOUS
1- Xxxxxxx Model R065LC261D266C218A59 6-Ton Trim Press, S/N 21108, Asset #22,
(1969); Hydraulic, Gap Frame; (Out of Service)
1- Xxxxxxx Model S065MC261D267C221A59S206 6-Ton Trim Press, S/N 20642, Asset
#18, (1967); Hydraulic, Gap Frame; (Out of Service)
1- Lot of Miscellaneous Machine Accessories and Factory Equipment, To
Include: Jib
Cranes; Wire Tainers; Pallet Jacks; Work Benches; Shop Furniture; Pallet
Rack; Dump Hoppers; Bench Vises; Miscellaneous Hand and Power Tools;
Miscellaneous Spare and Repair Parts; Miscellaneous Not in Use Equipment;
Storage Cabinets; Fans; Pipe Threader; Oxy Acetylene Torch Sets; Floor
Sweeper; Miscellaneous Maintenance Equipment; QPC Mold Temperature
Controllers; QPC Water Cooling Towers; Cooling Carousel; Ladders;
Miscellaneous Inspection Equipment; Miscellaneous Secondary Equipment;
Rotary Shrink Wrapper; Battery Chargers; Miscellaneous Perishable Tooling;
Lockers; Cafeteria Furniture; etc.
1- Xxxxxxx Model 6080 Walk-Behind Electric Floor Scrubber, S/N Unknown; 1,091
Hours Indicated
1- Kard Model TP-30-4 30-Ton Press, S/N TK-1064; (Currently Not In Service)
1- Xxxxxxx Model GC10C09C23A68A61A46 10-Ton Press, S/N 6484-A54S05, 7-1/2 hp
1- Xxxxxxx 8-Ton Press, S/N Unknown; Estimated 8 Ton Capacity
1- Xxxxxxx 6-Ton Press
1- Ridgid Model 500 Pipe Threader, S/N Unknown
1- Weldotron Model 7121 7-kW Shrink Tunnel, S/N EL84471; Electric, 14"; (Not
In Service)
1- Sioux Model 180C Steam Cleaner, S/N 9907031, (1999); 30,000 Btus
1- Delta 2,200-psi Pressure Washer, S/N Unknown; with 4.5 hp Honda Model
GCV135 Gasoline Engine
1- Xxxxxxxx Model 1637 Drill Press, S/N 115789; 8" Throat
1- Lot of Machinery and Equipment Stored in Warehouse, To Include: Drill
Presses; Disc Xxxxxxx; Arbor Presses; Dust Collectors; etc.
1- Lot of Office Furniture and Business Machines
1- Genie Model Z25-8 25' Aerial Lift, S/N 188, (2000); 500-Lb. Capacity
1- Tiocco Model T-3000-FRS Hydraulic Fluid Filter, (2003)
1- Xxxxxxxxx-Xxxx Model 2545E10VFP 35-CFM Reciprocating Air Compressor, S/N
0308080102, (2003), 10 hp; with Air Cooled Aftercooler
MAINTENANCE
1- Demco Model KE Floor-Type Drill, S/N 43063; 9" Throat, 16" x 16" Worktable
1- Manufacturer Unknown H-Frame Press, S/N Unknown; 28" Between Posts; with
Enerpac Hydraulic Press
1- Lincoln Model Power Mig 200 200-Amp. Welder, S/N K1766-1 10564
M1011020568; 200 Amps @ 30% Duty Cycle; with Cart
1- Milwaukee Model 6175 Cut-Off Saw, S/N 99111774; 16"D Grinding Wheel
1- Manhattan Model 951230 Floor-Type Drill, S/N 58289, 1/2 hp; 8" Throat,
14"D Worktable
1- Lincoln Model Idealarc 250 250-Amp. Welder, S/N AC-307876, (1973); 140
Amps @ 100% Duty Cycle
1- Apex 16"D Disc Sander, 3 hp; Model and S/N Unknown;
1- Lot of Factory and Support Equipment
QC LAB
1- Xxxxxxxx 36"D x 48"L x 8"H Granite Surface Plate
1- Arun Technologies Model Series 2000 Spectrometer; with Monitor; and
Printer
1- Xxxxxxxx Model PRS-150 X-Ray Machine; with X-Xxx Xxxxx; Power Supply;
Model MGC-23 Controls; and Ikegami Monitor
1- Gauge Master Model Series 80-89/GMX 22" Optical Comparator, S/N 3772590,
(1993); with Gage Master GMX 2-Axis Digital Readout
1- Xxxxx & Xxxxxx Model MicroXcel UHA Coordinate Measuring Machine, S/N
1196-3431, (1996); 28" X-, 45" Y-, and 25" Z-Axis Travel, 33" x 53" x 4"
Granite Worktable; with Xxxxxxxx XX0X Probe; PC Controls; and Xxxxx &
Xxxxxx Software
1- Manufacturer Unknown 48"D x 60"L x 8"H Granite Surface Plate
1- Sheffield Model Cordax 1808 Coordinate Measuring Machine, S/N 249671085;
27" X-, 25" Y-, and 17" Z-Axis Travel, 30"D x 54"L x 8"H Granite Surface
Plate; with Renishaw TP1S Probe; Digital Readout; and Smart Terminal
Software, Version 2
1- Lot of Miscellaneous QC Lab Equipment, To Include: Edmunds Air Gauges; Pin
Gauge Sets; Gauge Block Sets; Height Gauges; Laser Xxxx; Video Camera;
Furnishings; PC's; Micrometers; Plotter; Blue Print Copier; Plug Gauges;
etc.
1- Hewlett Packard Model 7595A Draftmaster I Plotter, S/N 2644A00891
1- Visi-Trak Model True Trak 2020/M91-6002 Monitor and Analysis System, S/N
95002
1- 3M Model 500 Microfilm Reader/Printer
OFFICE
1- Lot of Office Furniture and Business Machines, To Include, But Not Limited
To: Desks; Chairs; File Cabinets; Tables; Televisions; Overhead
Projectors; Calculators; Typewriters; Teleconferencing Equipment;
Cabinets; Partitions; Breakroom Furniture; etc.
1- Lot of Computer and Peripheral Equipment, To Include: Personal Computers;
File Servers; Monitors; Printers; Facsimile Machines; Photocopiers;
Network Communications Equipment; etc.
WAREHOUSE
1- X.X. Xxxxxx Model DCT-28 28-Ton Trim Press, S/N 2494, (1968);
(Remanufactured By EPCO In 2000), with Light Curtain
1- Keystone 30-Ton Trim Press, S/N 3904, (1995); Hydraulic, 4-Post, Upacting,
24" x 36" Between Posts; with Self-Contained Hydraulic Power Supply (Not
in Service; Operable)
1- Keystone 35-Ton Trim Press, S/N 005, (1987); Hydraulic, 4-Post, Upacting,
24" x 36" Between Posts
1- Xxxxxxx Model S065MC281C221C224 6-Ton Trim Press, S/N 15884-A72A59,
(1960), 5 hp; Hydraulic, Gap Frame, 18" Daylight, 7" Throat, 12" Stroke,
3.25" Cylinder Bore
1- Xxxxxxx Model GC10C09C23A68A61A46 10-Ton Trim Press, S/N 6483-A54S05,
(1951); Hydraulic, Gap Frame (Currently Not in Service; Operable)
1- Xxxxxxx Model 6484 10-Ton Trim Press; Hydraulic, Gap Frame
1- Xxxxxxx Model GC10C61D15A68 10-Ton Trim Press, S/N 13825; Hydraulic, Gap
Frame
2- Mid-West Tool 6-Station Indexing Machining Centers, S/N 273; Each Station
with (2) Sugino Drill Heads; and Xxxxx-Xxxxxxx Model PanelView 550 PLC
Controls; (1 Located Off Site)
1- X.X. Xxxxxx Model DCT-28 28-Ton Trim Press, S/N 2629, (1970); Hydraulic,
4-Post, 24" x 36" Between Posts; (Remanufactured 2000)
1- Duracraft Model 45161 16" Single-Spindle Floor-Type Drill, S/N Not
Available
1- Lincoln Model DPF1658-2 16" Single-Spindle Floor-Type Drill, S/N 522805,
(1992)
1- Xxxxxxxx Floor-Type Drill; (Tags Painted)
1- Bridgeport Vertical Milling Machine, S/N J97046, (1955); 80 to 2,720-rpm
Spindle Speeds, 9" x 42" Table; with Specially Manufactured Work Fixture
1- Spin Blast Shot Blast Machine; Spinner Hanger Type, 60" x 48" x 72", 6,428
Hours Indicated; with Reclaim and Outside Dust Collector; (Currently Not
in Service; Operable)
1- Xxxxx Model GCS20MB 4,000-Lb. LP Gas Lift Truck, S/N G138MB-1127-6920KOF,
(1987); 188" Lift Height, Solid Tire; (Currently Not in Service; Not
Operable)
1- Dayton Model 6H011B 1,400-psi Steam Cleaner, S/N C24015;
2.2-Gallons/Minute, 229,000-Btus/Hour
ANNEX A
UCC FINANCING STATEMENT AMENDMENT
