Xxxxxxx 0x Sample Clauses

Xxxxxxx 0x. Xxxxxxx Figures 2a and 2b Measuring positions for vehicles in motion indoor and in standstill 0x. Xxxxxxx 0x. Xxxxxxx Figure 3 Minimum space to be qualified as Semi-Anechoic chamber Figure 4 Determination of the range of background noise Figure 5 Vehicle A-Weighted sound pressure level measurement correction criteria Figure 6 Background noise requirements for analysis in one-third-octave bands Figure 7a Test procedures for measurement of frequency shift Figure 7b Test procedures for measurement of frequency shift, Method A Figure 7c Test procedures for measurement of frequency shift, Methods B, C, D, and E * * Former titles of the Agreement: Agreement concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958 (original version); Agreement concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals Granted on the Basis of these Prescriptions, done at Geneva on 5 October 1995 (Revision 2). 0 As defined in the Consolidated Resolution on the Construction of Vehicles (R.E.3.), document ECE/TRANS/WP.29/78/Rev.6, para. 2 - xxx.xxxxx.xxx/xxxxx/xxxx/xx00/xx00xxx/xx00xxx/xx00xxxxxxxxxxx.xxxx 0 At this stage, only acoustic measures shall be developed in order to overcome the concern of reduced audible signals from electrified vehicles. After finalisation, the appropriate Working Party (GR) shall be assigned with the enhancement of the Regulation in order to develop alternative, non-acoustic measures, taking into account active safety systems such as, but not limited to, pedestrian detection systems. To provide for environmental protection, this Regulation specifies also maximum limits.
Sample 1
AutoNDA by SimpleDocs
Xxxxxxx 0x. Xxxxxxx Figure 2a and 2b Measuring positions for vehicles in motion in-door and in stationary 0x. Xxxxxxx 0x. Xxxxxxx ** Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition Vehicle Equipment and Parts, done at Geneva on 20 March 1958. 1 At this stage, only acoustic measures shall be develop in order to overcome the concern of reduced audible signals from EV / HEV. After finalisation, the appropriate GR shall be assigned with the enhancement of the Regulation in order to develop alternative, non-acoustic measures, taking into account active safety sytems such as, but not limited to pedestrian detection systems.
Sample 1
Xxxxxxx 0x. Xxxxxxx Figure 2a and 2b Measuring positions for vehicles in motion in-door and in stationary Figure 3 Determination of the range of background noise ** Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition Vehicle Equipment and Parts, done at Geneva on 20 March 1958. 1 At this stage, only acoustic measures shall be develop in order to overcome the concern of reduced audible signals from EV / HEV. After finalisation, the appropriate GR shall be assigned with the enhancement of the Regulation in order to develop alternative, non-acoustic measures, taking into account active safety systems such as, but not limited to pedestrian detection systems. 2 The distinguish numbers of the Contracting Parties to the 1958 Agreement are reproduced in Annex 3 to Consolidated Resolution on the Construction of Vehicles (R.E.3), document ECE/TRANS/WP.29/78/Rev.23. 3 Distinguishing number of the country which has granted/extended/refused/withdrawn approval (see approval provisions in the Regulation). 4 Delete what does not apply  If the means of identification of type contains characters not relevant to describe the vehicle, types covered by the type-approval certificate such characters shall be represented in the documentation by the symbol: ‘?’ (e.g. ABC??123??). 5 As defined in the R.E.3 6 The latter number is given as an example only.
Sample 1
Xxxxxxx 0x. Xxxxxxx Figure 2a and 2b Measuring positions for vehicles in motion in-door and in stationary 0x. Xxxxxxx 0x. Xxxxxxx ** Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition Vehicle Equipment and Parts, done at Geneva on 20 March 1958. 1 The distinguish numbers of the Contracting Parties to the 1958 Agreement are reproduced in Annex 3 to Consolidated Resolution on the Construction of Vehicles (R.E.3), document ECE/TRANS/WP.29/78/Rev.23. 2 Distinguishing number of the country which has granted/extended/refused/withdrawn approval (see approval provisions in the Regulation). 3 Delete what does not apply  If the means of identification of type contains characters not relevant to describe the vehicle, types covered by the type-approval certificate such characters shall be represented in the documentation by the symbol: ‘?’ (e.g. ABC??123??). 4 As defined in the R.E.3 5 The latter number is given as an example only.
Sample 1
Xxxxxxx 0x. Xxxxxxx Figures 2a and 2b Measuring positions for vehicles in motion indoor and in standstill 0x. Xxxxxxx 0x. Xxxxxxx Figure 3 Minimum space to be qualified as Semi-Anechoic chamber Figure 4 Determination of the range of background noise Figure 5 Vehicle A-Weighted sound pressure level measurement correction criteria Figure 6 Background noise requirements for analysis in one-third-octave bands Figure 7a Test procedures for measurement of frequency shift Figure 7b Test procedures for measurement of frequency shift, Method A Figure 7c Test procedures for measurement of frequency shift, Methods B, C, D, and E ** Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958.
Sample 1
Xxxxxxx 0x. Xxxxxxx Figures 2a and 2b Measuring positions for vehicles in motion indoor and in standstill 0x. Xxxxxxx 0x. Xxxxxxx Figure 3 Minimum space to be qualified as Semi-Anechoic chamber Figure 4 YES
Sample 1

Related to Xxxxxxx 0x

  • Xxxxxxxx, Xx (Xxxxxxx Xxxxxxxx).

  • Xxxxxxx, Xx Xxxxxxx X. Xxxxxxx, Xx. has served as a Senior Vice President of IPT since August 1997, and served as Vice President and Director of Operations of IPT from December 1996 until August 1997. Xx. Xxxxxxx'x principal employment has been with Insignia for more than the past five years. From January 1994 to September 1997, Xx. Xxxxxxx served as Managing Director-- Partnership Administration of Insignia. PRESENT PRINCIPAL OCCUPATION OR EMPLOYMENT AND NAME FIVE-YEAR EMPLOYMENT HISTORY ---- ---------------------------- Xxxxxx Xxxxxx Xxxxxx Xxxxxx has served as Vice President and Treasurer of IPT since December 1996. Xx. Xxxxxx served as a Vice President of IPT from December 1996 until August 1997 and as Chief Financial Officer of IPT from May 1996 until December 1996. For additional information regarding Xx. Xxxxxx, see Schedule III.

  • Xxxxxxxxx Xxxx Xxxx Certificate of Trust shall be effective upon filing.

  • Xxxxxxxx Xxxx Xxxxx, all sons of Late Sukur Xxx Xxxxx (13) Anjura Xxxxxx, wife of Late Sukur Xxx Xxxxx and (14) Sri Xxxxxxxxxx Xxxxxx, son of Late Xxxxxxxxx Xxxxxx, who has been represented by his lawfully constituted attorney Sri Xxxxxxxxx Xxxx Xxxxxxxx, son of Late Bilash Xxxxxxx Xxxxxxxx, by way of a Deed of Sale in Bengali language (kobala) dated 03rd June 2016 registered in the office of the District Sub-Registrar-III, North 24 Parganas and recorded in Book-I, Volume No. 1519-2016, at Pages 23140 to 23177, being No. 151901072 for the year 2016, sold, conveyed and transferred in favour of Smt. Lakshmi Xxxx Xxxxxxxx, wife of Sri Xxxxxxxxx Xxxx Xxxxxxxx, ALL THAT (1) piece and parcel of Sali (agricultural) land measuring 12 (twelve) decimal, more or less, comprised in R.S./L.R. Dag No. 105, recorded under L.R. Khatian Nos. 291, 684, 247, 1696, 300, 1981, 175, 277, 1294 and 1383 and (2) piece and parcel of Sali (agricultural) land measuring 0.88 (zero point eight eight) decimal, more or less, equivalent to 383.64 (three hundred and eighty three point six four) square feet, more or less [out of total land measuring 08 (eight) decimal, more or less], being part of R.S./L.R. Dag No. 101, recorded in L.R. Khatian No. 1811, both aggregating to land measuring 12.88 (twelve point eight eight) decimal, more or less, Mouza Paschim Icchapur, X.X. No. 29, Xx.Xx. No. 202, Police Station Barasat, within the limits of Xxxx No. 34 of Barasat Municipality, Xxx-Xxxxxxxxxxxx Xxxxxxxx Xxxxxxxxxxxx, Xxxxxxxx Xxxxx 00 Parganas (hereinafter referred as “Lakshmi’s First Land”).

  • Xxxxxxxxx Xxx Xxxx Agreement shall be governed by the interpreted in accordance with the laws of the State of Washington without reference to its conflicts of laws rules or principles. Each of the parties consents to the exclusive jurisdiction of the federal courts of the State of Washington in connection with any dispute arising under this Agreement and hereby waives, to the maximum extent permitted by law, any objection, including any objection based on forum non coveniens, to the bringing of any such proceeding in such jurisdictions.

  • Xxxxxxxxx, Xx Xxxxxxx X. Xxxxxxxxx, Xx., Chief Executive Officer

  • Xxxxxxxx, X X. Xxxxxx, as Trustee .................. 00 Xxxxx Xxxxxx, Xxxxxx, Xxxxxxxxxxxxx 00000

  • Xxxxx Xxxxxxxxx Purchase Order and Sales Contact Email Please enter a valid email address that will definitely reach the Purchase Order and Sales Contact. 2 2 xxxxxxxxxxx@xxxxxxxxxxxxxx.xxx Purchase Order and Sales Contact Phone Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto-populate your entry with commas once submitted which is appropriate and expected (Ex. 8,668,398,477). 2 3 9038838686 Company Website Company Website (Format - xxx.xxxxxxx.xxx) 2 4 xxxxxxxxxxxxxx.xxxxx Entity D/B/A's and Assumed Names You must confirm that you are responding to this solicitation under your legal entity name. Go now to your Supplier Profile in this eBid System and confirm that your profile reflects your "Legal Name" as it is listed on your W9. In this question, please identify all of your entity's assumed names and D/B/A's. Please note that you will be identified publicly by the Legal Name under which you respond to this solicitation unless you organize otherwise with TIPS after award. Team North Texas Primary Address Primary Address 2 0000 Xxxx Xx. Primary Address City Primary Address City 7 Greenville Primary Address State Primary Address State (2 Digit Abbreviation) 2 8 TX Primary Address Zip Primary Address Zip 75401 Search Words Identifying Vendor Please list all search words and phrases to be included in the TIPS database related to your entity. Do not list words which are not associated with the bid category/scope (See bid title for general scope). This will help users find you through the TIPS website search function. You may include product names, manufacturers, specialized services, and other words associated with the scope of this solicitation. 0 Carpentry General Contractor Electrical Plumbing Access Control Data Repairs Maintenance Drywall Paint Remodel Renovation Certification of Vendor Residency (Required by the State of Texas) Does Vendor's parent company or majority owner:

  • Xxxxxxx Xxxxxxx Purchase Order and Sales Contact Email Please enter a valid email address that will definitely reach the Purchase Order and Sales Contact. 2 2 xxxxxxxx@xxxxx.xxx Purchase Order and Sales Contact Phone Numbers only, no symbols or spaces (Ex. 8668398477). The system will auto-populate your entry with commas once submitted which is appropriate and expected (Ex. 8,668,398,477). 2 3 9728241762 Company Website Company Website (Format - xxx.xxxxxxx.xxx) 2 4 xxx.xxxxx.xxx Entity D/B/A's and Assumed Names You must confirm that you are responding to this solicitation under your legal entity name. Go now to your Supplier Profile in this eBid System and confirm that your profile reflects your "Legal Name" as it is listed on your W9. In this question, please identify all of your entity's assumed names and D/B/A's. Please note that you will be identified publicly by the Legal Name under which you respond to this solicitation unless you organize otherwise with TIPS after award. 5 Connect Technology Group Primary Address Primary Address 6 0000 XxxXxxxxx Xx. Xxxxx 000 Primary Address City Primary Address City 7 Carrollton Primary Address State Primary Address State (2 Digit Abbreviation) 2 8 TX Primary Address Zip Primary Address Zip 9 75007 Search Words Identifying Vendor Please list all search words and phrases to be included in the TIPS database related to your entity. Do not list words which are not associated with the bid category/scope (See bid title for general scope). This will help users find you through the TIPS website search function. You may include product names, manufacturers, specialized services, and other words associated with the scope of this solicitation.

  • Xxxxxx Xxxxxxxx SIGNED by the Premier of the State of Western Australia for and on behalf of the State in the presence of — XXXXX XXXXX.

Time is Money Join Law Insider Premium to draft better contracts faster.