WATER AND SANITARY SEWER SYSTEMS Sample Clauses

WATER AND SANITARY SEWER SYSTEMS. Developer shall, at its sole expense, construct and install improvements and/or connections tying into the municipal water and sewage systems, including any required water hydrants. Such improvements shall be designed and constructed in accordance with the Final Development Plan, approved engineering construction plans and all applicable City, County and State standards, codes, regulations, ordinances and laws. Such water and sanitary sewer service facilities, including any on-site and off-site facilities, extensions and easements to reach the area to be served, shall be provided by and at the sole expense of the Developer shall be completed, approved and dedicated to (as required by the City in its discretion) the City to the extent necessary to fully service all proposed and existing facilities, structures and uses in the Project. All water and sanitary system improvements shall be completed before construction of Phase I of the development. The Developer shall post security in the form of cash or check or certificate of deposit, irrevocable letter of credit (issued by an institution doing business in Oakland County) or a performance bond (the “Security”), as specified in a separate agreement approved by the City. The Security shall be in an amount equal to the estimated cost of installation, or a performance bond in an amount equal to the cost of construction of the water and sanitary sewer systems plus 10% refundable cash deposit. The Agreement shall also authorize the City, at its option, to complete these improvements as required by the City Engineer, if Developer fails to complete the water and sanitary sewer improvements in a timely fashion, once construction has commenced. All performance bonds shall be issued by institutions licensed and admitted to do business in the State of Michigan. In such case, building permits for the applicable phase of the development to be served by the water and sanitary sewer improvements in question shall be issued upon the posting of such Security and execution of such agreement, which shall be approved by the City Attorney in the exercise of reasonable discretion. The water and sanitary sewer improvements shall be completed and approved prior to issuance of any certificates of occupancy for the last building within the Phase of that development. At the Developer’s request, but not more frequently than once a month, the Security may be reduced by the same percentage as the percentage of completion of the water and s...
Sample 1See All (5)
AutoNDA by SimpleDocs
WATER AND SANITARY SEWER SYSTEMS. Developer shall, at its sole expense, construct and install on-site and off-site improvements to and connections tying into the municipal water and sewage systems in accordance with construction plans prepared by Washtenaw Engineering Co., Inc. (“Washtenaw Engineering”) and approved by the Township engineer, and consistent with the approved Site Plan dated July 10, 2019. Developer shall dedicate easements and conveyances for, and post financial security relating to the completion of construction and dedication of, all such water and sewer system improvements in accordance with and as set forth in this Agreement. Township hereby allocates and irrevocably designates to the Project 95 REUs (Residential Equivalent Units) for sanitary sewer service to the Project. Developer shall install the connection for the water main loop on the adjacent parcel to the north of the Project owned by Xxxxxx Optical Systems, Inc. (“Kaiser”) as shown on the Washtenaw Engineering Plan and Summary dated November 29, 2018 and accepted on behalf of Kaiser by email dated February 12, 2019. Developer and Kaiser shall dedicate such water main loop to the Township once constructed and approved. Developer shall obtain the EGLE (MDEQ) Act 399 Permit for all public water main improvements on the Property which shall be submitted through the Township’s engineering consultant. Xxxxxxxxx’s engineer will coordinate with the Township engineer and Kaiser the shut down of the water main necessary for the looped connection.
Sample 1
WATER AND SANITARY SEWER SYSTEMS. Developer shall, at its sole expense, construct and install all connections tying into the municipal water and sanitary sewer systems. The Developer shall convey to the City easements necessary for the City’s access to sewer and water facilities within the Development or such facilities will be installed in City rights-of-way.
Sample 1

Related to WATER AND SANITARY SEWER SYSTEMS

  • Sanitary Sewer Provide a standard bubble map, as part of the plans, showing locations of numbered points, and a table with point number, northing and easting coordinates, description, and BL station for each point, for the following: ▪ all possible control as established or attained during preliminary survey, including but not limited to – section corners, property irons, intersection center-center irons, other set monuments ▪ benchmarks, including TBM set with preliminary survey ▪ center of manholes ▪ end of manhole stubs (when longer than five feet)

  • Sanitary and Phytosanitary Measures 1. The rights and obligations of the Parties in respect of sanitary and phytosanitary measures shall be governed by the WTO Agreement on the Application of Sanitary and Phytosanitary Measures.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • Water Provide hot water for lavatory purposes and cold water for drinking, lavatory and toilet purposes.

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the weather conditions identified in Chapter 13, “Energy Conservation” of the 1996 BOCA Building Code and supplemented by the “Building Code Rules”. All HVAC equipment shall be commercial or light industrial grade. If new construction it shall be installed at grade or within mechanical rooms for easy access and maintenance. If existing construction, roof mounted equipment will be considered after all other options have been exhausted, including the elimination of noise and vibration transfer to the structural members. The HVAC systems shall be zoned, with units sized and placed as required by heating and cooling loads on the building. Zoning of systems is dependent on the size, shape and orientation of the building. The HVAC system shall be divided into a minimum of 4 exterior and 1 interior temperature control zones. Return air shall be taken from the area supplied or adjacent to the area in the same temperature control zone. The ventilation and exhaust system shall be sized to maintain a positive pressure throughout the building envelope to limit air and dust infiltration. No HVAC ductwork shall be installed under the floor slab or underground.

  • Electrical Provide drawings for the following systems:

  • Stormwater Notwithstanding any other provisions or terms of this Agreement, Company acknowledges that certain properties within the Premises or on Authority-owned land are subject to stormwater rules and regulations. Company agrees to observe and abide by such stormwater rules and regulations as may be applicable to the Premises, and, if applicable, Company hereby expressly covenants, warrants, and represents to Authority, in connection with Company’s operations on the Premises, the following:

  • Utilities The Landlord shall provide the following utilities and services to the Tenant: _ _. Any other utilities or services not mentioned will be the responsibility of the Tenant.

  • Heating The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • Common Areas Tenant shall have the non-exclusive right to use in common with other tenants in the Project, and subject to the Rules and Regulations referred to in Article 5 of this Lease, those portions of the Project which are provided, from time to time, for use in common by Landlord, Tenant and any other tenants of the Project (such areas, together with such other portions of the Project designated by Landlord, in its discretion, including certain areas designated for the exclusive use of certain tenants, or to be shared by Landlord and certain tenants, are collectively referred to herein as the “Common Areas”). The Common Areas shall consist of the “Project Common Areas” and the “Building Common Areas.” The term “Project Common Areas,” as used in this Lease, shall mean the portion of the Project designated as such by Landlord or areas within the Project that the occupants of the Building are permitted to utilize pursuant to a recorded declaration and which areas shall be maintained in accordance with the declaration. The term “Building Common Areas,” as used in this Lease, shall mean the portions of the Common Areas located within the Building reasonably designated as such by Landlord. The manner in which the Common Areas are maintained and operated shall be at the reasonable discretion of Landlord and the use thereof shall be subject to the Rules and Regulations as Landlord may make from time to time. Landlord reserves the right to close temporarily, make alterations or additions to, or change the location of elements of the Project and the Common Areas, provided that, in connection therewith, Landlord shall perform such closures, alterations, additions or changes in a commercially reasonable manner and, in connection therewith, shall use commercially reasonable efforts to minimize any material interference with Tenant’s use of and access to the Premises.

Time is Money Join Law Insider Premium to draft better contracts faster.