Uncarpeted Floors Sample Clauses
The Uncarpeted Floors clause sets out requirements or restrictions regarding areas within a property that do not have carpeting. Typically, this clause may specify the types of flooring allowed, maintenance obligations, or noise mitigation measures for uncarpeted surfaces such as hardwood, tile, or laminate. For example, tenants might be required to use area rugs in certain rooms to reduce noise transmission to neighboring units. The core function of this clause is to prevent disturbances and potential damage associated with uncarpeted floors, thereby promoting a more comfortable and well-maintained living environment.
Uncarpeted Floors. All hard surfaced floors will be wet-mopped, dried and spray buffed. All wax and marks will be removed from baseboards. Floors and baseboards are to be left in a uniformly bright, clean condition.
Uncarpeted Floors. All hard-surfaced floors will be dust-mopped nightly, using a treated dust mop, moving all light furniture. All furniture will be replaced to its original position. Dust-mop under all desks and large furniture where possible.
Uncarpeted Floors. All hard-surfaced floors are to be mopped with a treated dust mop and maintained as needed to preserve and retain uniformly bright appearance, with particular attention to edges, corners and behind doors. All spills and stains will be removed with damp mop or cloth. Baseboards will be wiped down with treated dust cloth.
Uncarpeted Floors. Hard-surfaced floors are to be dust mopped, using a treated mop to remove all loose dirt and grit, and then wet-mopped with clear water and dried. All mop marks and water splashes will be removed from walls, baseboards, and furniture, and all furniture and fixtures replaced to their original position when mopping is completed.
Uncarpeted Floors. All hard-surfaced floors will be machine buffed, using an electric rotary buffing machine to obtain maximum shine. Non-skid wax or approved floor finish will be applied as necessary.
Uncarpeted Floors. All hard-surfaced floors will be spray buffed with an electric rotary buffing machine as necessary. All wax marks will be removed from baseboards, doors and frames.
Uncarpeted Floors. All hard-surfaced floors will be buffed with an electric rotary buffing machine as necessary, per manufacturer's specifications, but no less than once a month. All finish marks and/or residual cleaning fluids will be removed from baseboards, doors, and frames.
Uncarpeted Floors. All hard-surfaced floors will be wet-mopped, allowed to dry and then machine spray-buffed.
Uncarpeted Floors. All hard-surfaced floors will be wet-mopped. All wax and marks will be removed from baseboards. Floors and baseboards to be left in a uniformly bright, clean condition.