Common use of Unbundled Voice Loop Clause in Contracts

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCI. CCI may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIPilgrim Telephone. CCI Pilgrim Telephone may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-non- coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIVertex. CCI Vertex may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIINET. CCI INET may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCIBTI. CCI BTI may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops Loops when reuse of existing facilities has been requested by CCIDTM. CCI DTM may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCINavigator. CCI Navigator may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIBAK. CCI BAK may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCISpectrotel. CCI Spectrotel may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIXxx.Xxx. CCI Xxx.Xxx may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCIOronoco. CCI Oronoco may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCISpeedy Reconnect. CCI Speedy Reconnect may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-non- coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIAmTel. CCI AmTel may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCITeleConex. CCI TeleConex may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIAzul Tel. CCI Azul Tel may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCISouthern Telecom. CCI Southern Telecom may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-non- coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIInternational Telnet. CCI International Telnet may also order OC-OC- TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCINewcomm. CCI Newcomm may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCINTBS. CCI NTBS may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCIVarTec. CCI VarTec may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCI. CCI C.M.. C.M. may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCIWorld Access. CCI World Access may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIOnePoint. CCI OnePoint may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCIGlobe. CCI Globe may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops Loops are 2-wire loop Loop start circuits, will be non-designed, and will not have remote access test points. OC will be offered as a chargeable option on SLI loops SL1 Loops when reuse of existing facilities has been requested by CCIKnology. CCI Knology may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up Loop Make-Up information which is similar to the information normally provided in a Design Layout RecordRecord (DLR). Upon issuance of a non-coordinated order in the service order system, SL1 loops Loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops Loops for its end usersEnd Users.

Unbundled Voice Loop. SL1 (UVL-SL1) loops are 2-wire loop start circuits, will be non-designed, and will not have remote access test points. points OC will be offered as a chargeable option on SLI loops when reuse of existing facilities has been requested by CCILightyear. CCI Lightyear may also order OC-TS when a specified conversion time is requested. OC-TS is a chargeable option for any coordinated order and is billed in addition to the OC charge. An Engineering Information (EI) document can be ordered as a chargeable option. The EI document provides loop make up information which is similar to the information normally provided in a Design Layout Record. Upon issuance of a non-coordinated order in the service order system, SL1 loops will be activated on the due date in the same manner and time frames that BellSouth normally activates POTS-type loops for its end users.compliance with BellSouth’s Interval Guide