Transmission Line. The Connecting Transmission Owner will review the drawings, design studies, and calculations pertaining to the Transmission Line. The Connecting Transmission Owner will review drawings related to the Environmental Management and Construction Plan for Developer’s Article VII application at the NYPSC, including detailed plan & profiles of the proposed transmission line along with related notes and construction sequencing information. The Connecting Transmission Owner will review and approve SUF material specifications. Such engineering services may also include additional services the Connecting Transmission Owner believes are necessary in order for it to be designed and constructed in accordance with its standards. For the items listed above, the Connecting Transmission Owner’s engineers will notify Developer of the estimated review turnaround times and the time when Developer must deliver specific materials and drawings.
Transmission Line. Developer is designing and procuring steel turning structures within the existing WD-1 230 kV ROW. The Connecting Transmission Owner will construct the turning structures in the 230kV ROW bringing the 230 kV line to the turning structures feeding the Xxxxxxx Substation. The Developer shall be responsible for designing, procuring, and constructing the steel monopole structures and transmission work required to bring the 230 kV lines from the ROW turning structures into the dead- end structures within the Xxxxxxx Substation. Connecting Transmission Owner shall update and install the panel labels, equipment labels, drawings and relay settings, if required (plus any additional work required) at Xxxxxx and Xxxxx associated with segmentation of the WD-1 line and conversion of the line to WPN-1 and PND-1.
Transmission Line. (a) Where it is reasonable, practical and economic, the Customer shall construct the Transmission Line. The Customer is encouraged to build to B.C. Hydro standards.
Transmission Line. For the new tranches of line created by the sectioning of the Piura Oeste-Pariñas 220 kV Line (L-2248), the protective relays to be implemented in the Xxxxx del Xxxxx 220 kV Substation shall follow the same protective philosophy currently used in Line L-2248, based on the use of the fiber optic cable in Line L-2248 and the branch subject matter of Point 2.2.2 of this annex. The corresponding adaptations shall also be made to the protective equipment of the lines in the Piura Oeste and Pariñas substations. The transmission lines shall have the following protection: • Primary protection: This protection shall consist of an independent multifunction protection unit, including, among others, the functions of line differential protection (87L), distance, reclosing, ground directional overcurrent, under- and overvoltage, synchronism, fault-closing, etc. With oscillography, fault locator and recorder. The transmission line shall also have a fiber optic link teleprotection system. • Backup protection: similar to the primary protection, in a separate protection unit. The single-phase reclosing shall coordinate with the teleprotection system the activation of the circuit breakers located at both ends of the line.
Transmission Line. A new 345-kV transmission line will be needed to connect the new substation to the existing BPA line. If the substation is located at the BPA right-of-way, this line would be very short. The line would have two circuits, one into the substation and one out of the substation. The construction could be similar to the existing lattice towers, and require a right-of-way of up to 300 feet in width.
Transmission Line. The GOL represents, warrants and covenants that as of the earlier to occur of the Construction Start Date and the date of Financial Closing: (i) the GOL will, itself or through another GOL Entity, be the sole and exclusive owner of the Transmission Line Area free of any Liens (other than Permitted Liens), (ii) other than the Transmission Line Area, no land or other interests in real property of any type are required under the Laws of Liberia for the design, development, construction, supply, start up, commissioning, testing, financing, implementation, operation or maintenance of the Transmission Line, and (iii) each parcel of land, contemplated in clause (i), as well as the acquisition thereof by or on behalf of the GOL after the date of this Agreement (as the case may be), is or will be (as the case may be), in compliance with all Laws of Liberia, all Environmental Laws and the Standards. On or before the earlier to occur of the Construction Start Date and the date of Financial Closing, the GOL shall deliver to the Company documentation evidencing such ownership.
Transmission Line. 23 Article 14
Transmission Line. The East 1/2 of the Southeast 1/4 of the Southeast 1/4 of the Northeast 1/4 of Section 17, Block 79, Township 3, Texas and Pacific Railway Survey, El Paso County, Texas. Conveyed to El Paso Electric Company by Warranty Deed from Xxxxxxx X. Xxxxxxx and Xxxx X. Xxxxxxx, of the County of Xxxxxx, State of Texas, recorded in Book 766, page 505, Instrument 37144, Deed Records, El Paso County, Texas.
Transmission Line. The recitals to this Agreement. (d) The venue for any arbitration hereunder shall be Washington, DC. Hathaway Effective: January 31, 2010 Vice President Transmission Issued on: January 29, 2010 PJM Interconnection, L.L.C. Original Sheet No. 51 FERC Electric Tariff Sixth Revised Volume No. 1 Original Service Agreement No. 2405
Transmission Line. Developer is designing and procuring steel turning structures within the existing WD-1 230 kV ROW. The Connecting Transmission Owner will construct the turning structures in the 230kV ROW bringing the 230 kV line to the turning structures feeding the Xxxxxxx Substation. The Developer shall be responsible for designing, procuring, and constructing the steel monopole structures and transmission work required to bring the 230 kV lines from the ROW turning structures into the dead- end structures within the Xxxxxxx Substation. Connecting Transmission Owner shall update and install the panel labels, equipment labels, drawings and relay settings, if required (plus any additional work required) at Xxxxxx and Xxxxx associated with segmentation of the WD-1 line and conversion of the line to WPN-1 and PND-1. Description Cost Estimate POI Substation Engineering & Design 55,125 POI Substation Construction Management 19,189 Major Substation Equipment 134,505 Construction Contract 350,595 POI Substation Sub-Total: 559,414 Indirects (5% Material) 6,725 POI Substation Contingencies (20%) 111,883 POI Substation Sub-Total 678,022 NYPA Engineering Review 28,215 NYPA Engineering, QA/QC, Project Management 142,930 NYPA Testing & Commissioning 16,500 NYPA Vehicle and Equipment Charges (15% of site labor) 6,518 Project Closeout 10,952 NYPA 230 kV Transmission connections NYPA Sub-Total (1): 205,115 NYPA Contingencies 10% 20,512 NYPA Indirects 15% 33,844 NYPA Sub-Total (2): 259,470 Labor Escalation 9,081 Unpaid NYPA Invoices for Drawing and Equipment Review NYPA Totals: 268,552 (B) Cost Estimate for CTOAF and SASUF Xxxxxxx Substation CTOAF Estimates SASUF Estimates Description Cost Estimate POI Substation Engineering & Design 496,125 POI Substation Construction Management 172,699 Major Substation Equipment 3,576,795 Construction Contract 3,155,355 Security Materials 69,458 Steel Structures 465,222 Minor Equipment 82,688 Miscellaneous Materials 27,563 Spare Parts 100,000 Commissioning 220,500 Inspections (3rd party independent Engineering Review and Inspections) 90,000 POI Substation Sub-Total 8,456,405 Indirects (5% Material) 178,840 POI Substation Contingencies (20%) 1,691,281 POI Substaion Sub-Total 10,326,526 NYPA Engineering Review 253,935 NYPA Engineering, QA/QC, Project Management 1,286,372 NYPA Testing & Commissioning 148,500 NYPA Vehicle and Equipment Charges (15% of site labor) 58,660 Project Closeout 98,568 NYPA 230 kV Transmission connections 160,000 NYPA Sub-Total (1)...
