Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner.
Sublicense to Use the Scudder Trademarks As exclusive licensee of the rights to use anx xxxxxcense the use of the "Scudder," "Scudder Investments" and "Scudder, Stevens & Clark, Inx." xxxdemaxxx (xxgether, the "Scuddex Xxxxx"), xxx xerexx xxant the Trust a nonexclusive right xxx xxxlicense to use (i) the "Scudder" name and mark as part of the Trust's name (the "Fund Namx"), xxd (ii) the Scudder Marks in connection with the Trust's investment products xxx xxxvices, in each case only for so long as this Agreement, any other investment management agreement between you or any organization which shall have succeeded to your business as investment manager ("your Successor") and the Trust, or any extension, renewal or amendment hereof or thereof remains in effect, and only for so long as you are a licensee of the Scudder Marks, provided however, that you agree to use your best xxxxxxx to maintain your license to use and sublicense the Scudder Marks. The Trust agrees that it shall have no right to suxxxxxxxe or assign rights to use the Scudder Marks, shall acquire no interest in the Scudder Marks othxx xxxx the rights granted herein, that all of txx Xxxxt's uses of the Scudder Marks shall inure to the benefit of Scudder Trust Company xx xxxer and licensor of the Scudder Marks (xxx "Xrademark Owner"), and that the Trust shall nxx xxxxlenge the validity of the Scudder Marks or the Trademark Owner's ownership thereof. The Truxx xxxxher agrees that all services and products it offers in connection with the Scudder Marks shall meet commercially reasonable standards of duaxxxx, xs may be determined by you or the Trademark Owner from time to time, provided that you acknowledge that the services and products the Trust rendered during the one-year period preceding the date of this Agreement are acceptable. At your reasonable request, the Trust shall cooperate with you and the Trademark Owner and shall execute and deliver any and all documents necessary to maintain and protect (including but not limited to in connection with any trademark infringement action) the Scudder Marks and/or enter the Trust as a registered user thereof. Xx xxch time as this Agreement or any other investment management agreement shall no longer be in effect between you (or your Successor) and the Trust, or you no longer are a licensee of the Scudder Marks, the Trust shall (to the extent that, and as soon ax, xx xawfully can) cease to use the Fund Name or any other name indicating that it is advised by, managed by or otherwise connected with you (or your Successor) or the Trademark Owner. In no event shall the Trust use the Scudder Marks or any other name or mark confusingly similar therexx (xxxluding, but not limited to, any name or mark that includes the name "Scudder") if this Agreement or any other investment advisory agrexxxxx xetween you (or your Successor) and the Fund is terminated.
License Agreement The Trust shall have the non-exclusive right to use the name "Invesco" to designate any current or future series of shares only so long as Invesco Advisers, Inc. serves as investment manager or adviser to the Trust with respect to such series of shares.
Software License Agreement McDATA agrees that all Licensed Software will be distributed to Customers subject to a Software License Agreement (including warranty statement), along with a McDATA Manual, in a manner which is (a) no less protective of BROCADE's Intellectual Property Rights in the Licensed Software than the form attached hereto as Exhibit D, and (b) legally enforceable in the jurisdictions in which the Licensed Software, as incorporated into the McDATA Products, is distributed.
Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.
Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.
Technology For purposes of this Agreement, “Technology” means all Software, information, designs, formulae, algorithms, procedures, methods, techniques, ideas, know-how, research and development, technical data, programs, subroutines, tools, materials, specifications, processes, inventions (whether or not patentable and whether or not reduced to practice), apparatus, creations, improvements and other similar materials, and all recordings, graphs, drawings, reports, analyses, and other writings, and other embodiments of any of the foregoing, in any form or media whether or not specifically listed herein. Further, for purposes of this Agreement, “Software” means any and all computer programs, whether in source code or object code; databases and compilations, whether machine readable or otherwise; descriptions, flow-charts and other work product used to design, plan, organize and develop any of the foregoing; and all documentation, including user manuals and other training documentation, related to any of the foregoing.
Third Party License Pursuant to 15 U.S.C. § 3710a(b)(1)(B), if PHS grants Collaborator an exclusive license to a CRADA Subject Invention made solely by an ICD employee or jointly with a Collaborator employee, the Government will retain the right to require Collaborator to grant to a responsible applicant a nonexclusive, partially exclusive, or exclusive sublicense to use the CRADA Subject Invention in Collaborator’s licensed field of use on terms that are reasonable under the circumstances; or, if Collaborator fails to grant a license, to grant a license itself. The exercise of these rights by the Government will only be in exceptional circumstances and only if the Government determines (i) the action is necessary to meet health or safety needs that are not reasonably satisfied by Collaborator, (ii) the action is necessary to meet requirements for public use specified by federal regulations, and such requirements are not reasonably satisfied by Collaborator; or (iii) Collaborator has failed to comply with an agreement containing provisions described in 15 U.S.C. § 3710a(c)(4)(B). The determination made by the Government under this Paragraph is subject to administrative appeal and judicial review under 35 U.S.C. § 203(2).
Technology and Intellectual Property (a) Schedule 2.22(a) sets forth a complete and correct list of all (i) registered trademarks, service marks, domain names, copyrights and patents; (ii) applications for registration or grant of any of the foregoing; (iii) unregistered trademarks, service marks, trade names, logos and assumed names; and (iv) licenses for any of the foregoing, in each case, owned by or for the benefit of the Company or a Company Subsidiary, or used in or necessary to conduct the Company’s or a Company Subsidiary’s business as presently conducted. The items on Schedule 2.22(a), together with all other trademarks, service marks, trade names, logos, assumed names, patents, copyrights, trade secrets, computer software, licenses, formulae, customer lists or other databases, business application designs and inventions currently used in or necessary to conduct the businesses of the Company or of a Company Subsidiary, constitute the “Intellectual Property.”
Technology Access Fee In consideration of the licenses and rights granted to Regado herein, Regado shall, as of the date immediately preceding the closing (the “Closing”) of the first equity financing of Regado in which Regado is assigned a pre-money valuation of not less than [***] dollars ($[***]), issue to Archemix fully-paid and non-assessable shares of common stock of Regado equal to [***] percent ([***]%) of the total number of equity shares of Regado, on a fully diluted basis, immediately prior to the issuance of shares at the Closing. Regado shall deliver written notice of the Closing to Archemix at least [***] business days prior to such Closing in accordance with the notice provisions contained in Section 14.1 of this Agreement. Archemix and Regado shall enter into such agreements relating to the issuance of the common stock as are customary under such circumstances. For the purpose of this Agreement, “fully diluted basis” shall mean the aggregate of (a) the number of shares of common stock issued and outstanding on the determination date, (b) the number of shares of common stock issuable upon exercise, exchange or conversion of all exercisable, exchangeable or convertible securities outstanding on the determination date, assuming such securities were exercised, exchanged or converted on the determination date (without regard to whether such securities are actually exercisable, exchangeable or convertible on the determination date) and (c) the number of shares of common stock issuable pursuant to any other obligation or agreement of, or right granted by, Regado, whether vested or unvested, contingent or otherwise.
