Stopped Sample Clauses

Stopped. Incorrectly identified as not having a downstream meter (subtraction). Three meters provide flow to cooling tower Incorrectly identified as having a meter downstream (subtraction). Nothing downstream of condensate meter Total: ($209,195.07) The net impact of these billing errors over the 6-year statute of limitations is a net overbilling of $209,196. In the spirit of innovation, the City and UVMMC partnered on developing a scope of work that would reinvest these funds owed to UVMMC into a series of mutually beneficial initiatives including an advanced (real time/smart) metering and water usage data management pilot and a comprehensive study on hospital water supply resiliency. Eligible costs include City labor spent on these initiatives, capital equipment and reimbursement costs for third party engineering consultants. The level of mutual benefit for UVMMC and the City is significant. Advanced or smart metering will provide the hospital real-time water usage data and can also provide real-time leak or high usage information which supports their conservation, efficiency and cost control initiatives. This advanced pilot on the hospital campus will bring us one step closer to implementing this for a broader swatch of ratepayers in the City. Even more important is the focus on water supply resiliency for the hospital. This effort will result in both parties 1) understanding the limitations of the existing water supply system including both City side and UVMMC internal plumbing scenarios that may result in loss of water pressure to UVMMC, and 2) being able to identify possible engineering solutions to mitigate that risk. See Attachment B: “Draft Memorandum of Understanding and Agreement for Resolution for Overbilling of UVMMC by the City of Burlington.” Other Errors/On-going Efforts
Sample 1
AutoNDA by SimpleDocs

Related to Stopped

  • BACK which the Note Holder making the exchange is entitled to receive. All Equipment Notes issued upon any registration of transfer or exchange of Equipment Notes (whether under this Section 2.07 or under Section 2.08 hereof or otherwise under this Trust Indenture) shall be the valid obligations of the Owner evidencing the same respective obligations, and entitled to the same security and benefits under this Trust Indenture, as the Equipment Notes surrendered upon such registration of transfer or exchange. Every Equipment Note presented or surrendered for registration of transfer, shall (if so required by the Mortgagee) be duly endorsed, or be accompanied by a written instrument of transfer in form satisfactory to the Mortgagee duly executed by the Note Holder or such holder’s attorney duly authorized in writing, and the Mortgagee shall require evidence satisfactory to it as to the compliance of any such transfer with the Securities Act, and the securities Laws of any applicable state. The Mortgagee shall make a notation on each new Equipment Note of the amount of all payments of Original Amount previously made on the old Equipment Note or Equipment Notes with respect to which such new Equipment Note is issued and the date to which interest on such old Equipment Note or Equipment Notes has been paid. Interest shall be deemed to have been paid on such new Equipment Note to the date on which interest shall have been paid on such old Equipment Note, and all payments of the Original Amount marked on such new Equipment Note, as provided above, shall be deemed to have been made thereon. The Owner shall not be required to exchange any surrendered Equipment Notes as provided above during the ten-day period preceding the due date of any payment on such Equipment Note. The Owner shall in all cases deem the Person in whose name any Equipment Note shall have been issued and registered as the absolute owner and holder of such Equipment Note for the purpose of receiving payment of all amounts payable by the Owner with respect to such Equipment Note and for all purposes until a notice stating otherwise is received from the Mortgagee and such change is reflected on the Equipment Note Register. The Mortgagee will promptly notify the Owner of each registration of a transfer of an Equipment Note. Any such transferee of an Equipment Note, by its acceptance of an Equipment Note, (i) agrees to the provisions of this Trust Indenture and the Participation Agreement applicable to Note Holders, including Sections 6.3, 6.4 and 9.1 thereof, and shall be deemed to have covenanted to the parties to the Participation Agreement as to the matters covenanted by the original Note Holder in the Participation Agreement and (ii) agrees to the restrictions set forth in Sections 4.1(a)(i) and 4.1(a)(iii) of the Intercreditor Agreement, and shall be deemed to have covenanted to the parties to the Intercreditor Agreement not to give any direction, or otherwise authorize, the Mortgagee to take any action that would violate Sections 4.1(a)(i) or 4.1(a)(iii) of the Intercreditor Agreement. Subject to compliance by the Note Holder and its transferee (if any) of the requirements set forth in this Section 2.07, Mortgagee and Owner shall use all reasonable efforts to issue new Equipment Notes upon transfer or exchange within 10 Business Days of the date an Equipment Note is surrendered for transfer or exchange.

  • Smoking Persons working under Agreement shall adhere to local smoking policies. Smoking will only be permitted in posted areas or off premises.

  • Obstruction The sidewalks, entries, passages, corridors, halls, lobbies, stairways, elevators and other common facilities of the Building shall be controlled by Landlord and shall not be obstructed by Tenant or used for any purposes other than ingress or egress to and from the Premises. Tenant shall not place any item in any of such locations, whether or not any such item constitutes an obstruction, without the prior written consent of Landlord. Landlord shall have the right to remove any obstruction or any such item without notice to Tenant and at the expense of Tenant. The floors, skylights and windows that reflect or admit light into any place in said Building shall not be covered or obstructed by Tenant.

  • Scratches (Q) appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors Specific to Home Automation: In additional to the exclusions listed above, this Agreement does not cover any loss, repairs or damage caused by or resulting from: (A) pre-existing conditions incurred or known to you (pre-existing means a condition prior to Plan issuance); (B) any repair covered by a manufacturer’s warranty or any insurance; (C) installation, or improper installation; or improper installation of customer replaceable components, modules, parts or peripherals; (D) damage or failure due to causes beyond our control such as environmental conditions, exposure to weather conditions or acts of nature including, but not limited to: fire, floods, smoke, sand, dirt, lightning, moisture, water damage, freezes, storms, wind, windstorm, hail, earthquake, animal or insect infestation, etc.; (E) damage or failure caused by riot, nuclear radiation, war, hostile action, or radioactive contamination, etc.; (F) battery failure or leakage; (G) collision, collapse, or explosion; (H) liquid spillage of any kind; (I) signal reception, transmission problems resulting from external causes, interruption of electrical service, loss of power, improper use of electrical/power, power “brown-out”, power overload or power surge (unless covered in the Special Features section of this document); (J) neglect, misuse, abuse, intentional damage, malicious mischief, theft, mysterious disappearance, vandalism or accidental damage; damage cause by dropping (K) rust, corrosion, warping, bending, etc.; (L) damage, warping, bending or rusting of any kind to the housing, cabinetry, outside casing or frame of the product; (M) any non-operating part, including but not limited to plastic, or decorative parts such as hinges, knobs, door liners, glass, handles, masks, rack rollers, shelves, etc.; (N) loss of or repair to components within the product not originally covered by the manufacturer’s warranty; (O) failure to product attachments not provided by the manufacturer or included in the original sale;

  • COUNTERFEIT GOODS a. Seller shall not furnish Counterfeit Goods to Buyer, defined as Goods or separately-identifiable items or components of Goods that: (i) are an unauthorized copy or substitute of an Original Equipment Manufacturer or Original Component Manufacturer (collectively, “OEM”) item; (ii) are not traceable to an OEM sufficient to ensure authenticity in OEM design and manufacture; (iii) do not contain proper external or internal materials or components required by the OEM or are not constructed in accordance with OEM design; (iv) have been re-worked, re-marked, re- labeled, repaired, refurbished, or otherwise modified from OEM design but not disclosed as such or are represented as OEM authentic or new; or (v) have not passed successfully all OEM required testing, verification, screening, and quality control processes. Notwithstanding the foregoing, Goods or items that contain modifications, repairs, re- work, or re-marking as a result of Seller’s or its subcontractor’s design authority, material review procedures, quality control processes or parts management plans, and that have not been misrepresented or mismarked shall not be deemed Counterfeit Goods. Counterfeit Goods shall be deemed nonconforming to this Contract.

  • COUNTERFEIT WORK (a) The following definitions apply to this clause:

  • No Smoking All District properties are tobacco-free zones; Contractor is prohibited from using any tobacco product on District property.

  • Garbage The Concessionaire will contract directly with the service provider for adequate dumpster capacity and wildlife resistance. The Department must pre- approve the location of dumpsters and frequency of pick-ups. The Concessionaire will provide recycle bins for use by Park visitors.

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.212 – MARKET-RELATED CONTRACT TERM ADDITION (11/08). The term of this contract may be adjusted when a drastic reduction in wood product prices has occurred in accordance with 36 CFR 223.52. The Producer Price Index used to determine when a drastic reduction in price has occurred is stated in A20. Purchaser will be notified whenever the Chief determines that a drastic reduction in wood product prices has occurred. If the drastic reduction criteria specified in 36 CFR 223.52 are met for 2 consecutive calendar quarters, after contract award date, Contracting Officer will add 1 year to the contract term, upon Purchaser’s written request. For each additional consecutive quarter such a drastic reduction occurs, Contracting Officer will, upon written request, add an additional 3 months to the term during Normal Operating Season, except that no single 3-month addition shall extend the term of the contract by more than one year. Contracting Officer must receive Purchaser’s written request for a market-related contract term addition before the expiration of this contract. No more than 3 years shall be added to a contract's term by market-related contract term addition unless the following conditions are met:

  • Ditches (1) Remove bank slough, minor slides, and obstructions.

Time is Money Join Law Insider Premium to draft better contracts faster.