Steam Turbine Sample Clauses

Steam Turbine. The turbine shall be operated in condensation mode. The back pressure at the turbine outlet shall be no more than 0.7 bar(a). The energy content of the steam shall be converted to electricity with a conversion efficiency of no less than 20% when operating within the Capacity Diagram and shall be computed as follows: P / (Q * (hexit - hfeed) * Oh)  0.2 Q is the steam flow (kg/sec.) passed from the boiler to the inlet of the steam turbine, which shall be continuously monitored by ProjectCo. Oh is the weekly turbine operation time measured in hours. (hexit - hfeed) is the difference between steam enthalpy (kJ/kg) at the boiler outlet (exit) and the enthalpy (kJ/kg) of the feed water in the feed water tank. The values of hexit and hfeed shall be based on ProjectCo’s monitoring of steam pressure and temperature at boiler outlet and the feed water temperature and pressure in the feed water tank. P is the weekly electricity production delivered to Manx Electricity Authority measured in kWh. This Requirement for conversion efficiency shall apply at all times during the Operating Period and shall at the Department's Representative's request be calculated on a weekly basis.
Sample 1
AutoNDA by SimpleDocs
Steam Turbine. (a) The steam turbine[s] shall be of a proven design, directly coupled to a 50 Hz generator. Design criteria shall be applied for a long creep life, cyclic duty and fast start-up. Last stage blade materials and exhaust steam wetness shall be selected with an objective to minimise blade erosion.
Sample 1
Steam Turbine a. Erect, install, assemble and perform initial and final alignment of the back pressure steam turbine including the generator and the excitation system. This Work includes motors, pumps, filter, supports, valves, instrumentation, ducts and piping, pipe supports, pipe fittings and pipe accessories, insulation, guards, covers.
Sample 1

Related to Steam Turbine

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Interconnection Agreement On or before December 31, 2015, Wholesale Market Participant must enter into an Interconnection Agreement with the Transmission Owner in order to effectuate the WMPA. Wholesale Market Participant shall demonstrate the occurrence of each of the foregoing milestones to Transmission Provider’s reasonable satisfaction. Transmission Provider may reasonably extend any such milestone dates, in the event of delays that Wholesale Market Participant (i) did not cause and (ii) could not have remedied through the exercise of due diligence. If (i) the Wholesale Market Participant suspends work pursuant to a suspension provision contained in an interconnection and/or construction agreement with the Transmission Owner or (ii) the Transmission Owner extends the date by which Wholesale Market Participant must enter into an interconnection agreement relative to this WMPA, and (iii) the Wholesale Market Participant has not made a wholesale sale under this WMPA, the Wholesale Market Participant may suspend this WMPA by notifying the Transmission Provider and the Transmission Owner in writing that it wishes to suspend this WMPA, with the condition that, notwithstanding such suspension, the Transmission System shall be left in a safe and reliable condition in accordance with Good Utility Practice and Transmission Provider’s safety and reliability criteria. Wholesale Market Participant’s notice of suspension shall include an estimated duration of the suspension period and other information related to the suspension. Pursuant to this section 3.1, Wholesale Market Participant may request one or more suspensions of work under this WMPA for a cumulative period of up to a maximum of three years. If, however, the suspension will result in a Material Modification as defined in Part I, Section 1.18A.02 of the Tariff, then such suspension period shall be no greater than one (1) year. If the Wholesale Market Participant suspends this WMPA pursuant to this Section 3.1 and has not provided written notice that it will exit such suspension on or before the expiration of the suspension period described herein, this WMPA shall be deemed terminated as of the end of such suspension period. The suspension time shall begin on the date the suspension is requested or on the date of the Wholesale Market Participant’s written notice of suspension to Transmission Provider, if no effective date was specified. All milestone dates stated in this Section 3.1 shall be deemed to be extended coextensively with any suspension period permitted pursuant to this provision.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Interconnection 2.1.10 Startup Testing and Commissioning

  • Production Phase contract period in which the Development and the Production are to be performed.

  • FABRICATION Making up data or results and recording or reporting them.

  • Design-Builder The person or entity responsible for the proper completion of the activities described in the Contract Documents and who executes the Contract.

  • Equipment Cleaning (a) Areas, known by Forest Service prior to timber sale advertisement, that are infested with invasive species of concern are shown on Sale Area Map. A current list of invasive species of concern and a map showing the extent of known infestations is available at the Forest Supervisor’s Office. For purposes of this provision, “Off-Road Equipment” includes all logging and construction machinery, except for log trucks, chip vans, service vehicles, water trucks, pickup trucks, cars, and similar vehicles.

  • Commissioning Commissioning tests of the Interconnection Member’s installed equipment shall be performed pursuant to applicable codes and standards. The Cooperative must be given at least five Business Days written notice, or as otherwise mutually agreed to by the Parties, of the tests and may be present to witness the commissioning tests.

  • Construction Completion The related Construction shall have been completed substantially in accordance with the related Plans and Specifications, the related Deed and all Applicable Laws, and such Leased Property shall be ready for occupancy and operation. All fixtures, equipment and other property contemplated under the Plans and Specifications to be incorporated into or installed in such Leased Property shall have been substantially incorporated or installed, free and clear of all Liens except for Permitted Liens.

Time is Money Join Law Insider Premium to draft better contracts faster.