Specially Equipped Bus, Options Sample Clauses

Specially Equipped Bus, Options. 9.1. Optional door sizes: Any additional optional door size offerings are to be specified. 9.2. Lift area outside light: There shall be an outside mounted light that is activated with the opening of the lift door. 9.3. Lift area inside and outside light: There shall be an inside and outside mounted light that is activated with the opening of the lift door. 9.4. Removable padded cover for wheelchair lift: The lift shall be equipped with a removable padded cover that will protect student from the lift. This is required to be easily removed and installed. This may be installed when there are extended periods of time the lift is not used. 9.5. Driver’s areas, lift enable switch: There shall be a switch mounted in the driver’s area that must be activated before the lift has power to operate. 9.6. Door lift interlock switch, automatic: When the lift door is opened, the bus shall be rendered inoperable in moving from the spot. 9.7. Door lift interlock switch, manual: There shall be a means of rendering the vehicle from moving. This activation shall be the results of an intentional change of a switch position by the driver in the lift area. 9.8. Lift area inside light: There shall be a light mounted above the lift area inside the bus that is activated by a switch in the driver’s area. 9.9. Lift area inside lights, 2-3": There shall be two 3" lights mounted above the lift area that is activated by a switch in the driver’s area. 9.10. Lift area inside lights, 2-5": There shall be two 5" lights mounted above the lift area that is activated by a switch in the driver’s area. 9.11. Thermal pane glass in lift door: The glass that is mounted in the lift door shall be a thermal pane. This may be required if the door is in the front body section, immediately behind the entrance door. 9.12. Delete front handrail: The front handrail, mounted on the right side of the step well when entering the bus, may be deleted.