SPECIAL CONTRACTS REQUIRED FOR NON. STANDARD Service requests beyond temporary service standards or beyond the standard line extension policy may be accomplished by a special contract.
SPECIAL CONTRACTS REQUIRED FOR NON Sample Clauses
Related to SPECIAL CONTRACTS REQUIRED FOR NON
Required Forms If subcontractors are used under the contract that has no stated HUB goal, Exhibits H-1, H-2, H-4 and H-6 are required. Exhibits H-1 and H-6 are required if no subcontractors are being used to perform work under this contract. State of Texas HUB Subcontracting Plan Prime Contractor Progress Assessment Report (Exhibit H-6) is required monthly even when no subcontracting activity has occurred. In addition, State of Texas HUB Subcontracting Plan Prime Contractor Progress Assessment Report (Exhibit H-6) should be submitted with the Provider’s invoice. EXHIBIT H-1 Texas Department of Transportation Subprovider Monitoring System Commitment Worksheet Contract #: Assigned Goal: % Federally Funded State Funded Prime Provider: Total Contract Amount: Prime Provider Info: DBE HUB Both Vendor ID #: DBE/HUB Expiration Date: (First 11 Digits Only) If no subproviders are used on this contract, please indicate by placing “N/A” on the 1st line under Subproviders. Subprovider(s) (List All) Type of Work Vendor ID # (First 11 Digits Only) D=DBE H=HUB Expiration Date $ Amount or % of Work * Subprovider(s) Contract or % of Work* Totals *For Work Authorization Contracts, indicate the % of work to be performed by each subprovider. Total DBE or HUB Commitment Dollars $ Total DBE or HUB Commitment Percentages of Contract % (Commitment Dollars and Percentages are for Subproviders only) EXHIBIT H-2 Texas Department of Transportation Subprovider Monitoring System Commitment Agreement This commitment agreement is subject to the award and receipt of a signed contract from the Texas Department of Transportation (TxDOT). NOTE: Exhibit H-2 is required to be attached to each contract that does not include work authorizations. Exhibit H-2 is required to be attached with each work authorization. Exhibit H-2 is also required to be attached to each supplemental work authorization. If DBE/HUB Subproviders are used, the form must be completed and signed. If no DBE/HUB Subproviders are used, indicate with “N/A” on this line: and attach with the work authorization or supplemental work authorization. Contract #: Assigned Goal: % Prime Provider: Work Authorization (WA)#: WA Amount: Date: Supplemental Work Authorization (SWA) #: to WA #: SWA Amount: Revised WA Amount: Description of Work (List by category of work or task description. Attach additional pages, if necessary.) Dollar Amount (For each category of work or task description shown.) Total Commitment Amount (Including all additional pages.) $ IMPORTANT: The signatures of the prime and the DBE/HUB and Second Tier Subprovider, if any (both DBE and Non-DBE) and the total commitment amount must always be on the same page. Provider Name: Name: (Please Print) Title: Signature Date Address: Phone # & Fax #: Email: DBE/HUB Sub Provider Name: (Please Print) Title: Signature Date Subprovider Name: VID Number: Address: Phone # & Fax #: Email: Second Tier Sub Provider: Name: (Please Print) Title: Signature Date Subprovider Name: VID Number: Address: Phone #& Fax #: Email: VID Number is the Vendor Identification Number issued by the Comptroller. If a firm does not have a VID Number, please enter the owner’s Social Security or their Federal Employee Identification Number (if incorporated). Contract No. EXHIBIT H-3 Texas Department of Transportation Subprovider Monitoring System for Federally Funded Contracts Progress Assessment Report for month of (Mo./Yr.) / Contract #: Original Contract Amount: Date of Execution: Approved Supplemental Agreements: Prime Provider: Total Contract Amount: Work Authorization No. Work Authorization Amount: If no subproviders are used on this contract, please indicate by placing “N/A” on the 1st line under Subproviders. DBE All Subproviders Category of Work Total Subprovider Amount % Total Contract Amount Amount Paid This Period Amount Paid To Date Subcontract Balance Remaining Fill out Progress Assessment Report with each estimate/invoice submitted, for all subcontracts, and forward as follows: 1 Copy with Invoice - Contract Manager/Managing Office 1 Copy – TxDOT, BOP Office, 120 X. 00xx, Xxxxxx, XX 00000, 000-000-0000, toll free 000-000-0000, or Fax to 000-000-0000 I hereby certify that the above is a true and correct statement of the amounts paid to the firms listed above. Print Name - Company Official /DBE Liaison Officer Signature Phone Date Email Fax Contract No. EXHIBIT H-4 Texas Department of Transportation Subprovider Monitoring System Final Report The Final Report Form should be filled out by the Prime Provider and submitted to the Contract Manager and the Business Opportunity Programs Office for review upon completion of the contract. The report should reflect all subcontract activity on the project. The report will aid in expediting the final estimate for payment. If the HUB or DBE goal requirements were not met, documentation supporting good faith efforts must be submitted. DBE Goal: % OR HUB Goal: % Total Contract Amount: $ Contract Number: Total Contract Amount: $ Vendor ID # Subprovider Total $ Amt Paid to Date TOTAL This is to certify that % of the work was completed by the HUB or DBE subproviders as stated above. By: Prime Provider Per: Signature Subscribed and sworn to before me, this day of , 20 Notary Public County My Commission expires: 12/06 DBE-H4.A Contract No. EXHIBIT H-5 Federal Subprovider and Supplier Information The Provider shall indicate below the name, address and phone number of all successful and unsuccessful subproviders and/or suppliers that provided proposals/quotes for this contract prior to execution. You may reproduce this form if additional space is needed. Name Address Phone Number The information must be provided and returned with the contract. Signature Date Printed Name Email Phone # Contract No. HUB Subcontracting Plan (HSP) Prime Contractor Progress Assessment Report This form must be completed and submitted to the contracting agency each month to document compliance with your HSP. Contract/Requisition Number: Contracting Agency/University Name: Contractor (Company) Name: Point of Contact: Date of Award: Object Code: (mm/dd/yyyy) State of Texas VID #: Phone #: (Agency Use Only) Reporting (Month) Period: Total Amount Paid this Reporting Period to Contractor: $ - Report HUB and Non-HUB subcontractor information *Texas Certified Total Contract $ Total $ Amount Paid Total Contract $ Subcontractor’s VID or HUB HUB? Amount from HSP This Reporting Period to Amount Paid to Date Object Code Subcontractor’s Name Certificate Number (Yes or No) with Subcontractor Subcontractor to Subcontractor (Agency Use Only) $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ $ - $ TOTALS: $ - $ - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - - $ - Signature: Title: Date: *Note: Prime contractors can verify subcontractor HUB certification status on-line at xxxx://xxx0.xxxx.xxxxx.xx.xx/cmbl/cmblhub.html HSP-PAR Rev. 9/05
Compliance with Audit and Reporting Requirements; Maintenance of Records A. The Grantee shall submit to an audit of funds paid through this Grant Agreement and shall make all books, accounting records and other documents available at all reasonable times during the term of this Grant Agreement and for a period of three (3) years after final payment for inspection by the State or its authorized designee. Copies shall be furnished to the State at no cost
REQUIRED FOR PART 2 JOC - PRICING OF Regular Hours Coefficient What is your regular hours coefficient for the RS Means Price Book? (FAILURE TO RESPOND PROHIBITS PART 2 JOC EVALUATION) Remember that this is a ceiling price proposed. You can discount lower than your proposed contract coefficient, but not higher. This is one of three pricing questions that are required for consideration for award on this solicitation. Please consider your answer carefully. An explanation of the TIPS scoring of pricing is included in the attachments for your information. The below is an Example of how pricing model works (not intended to influence your proposed coefficient, you should propose a coefficient that you determine is right for your business): To propose the exact pricing as the RS Means Unit Price Book, you would insert a 1.0 and to propose a 5% discount for the RS Means Price Book would be a .95 regular hours coefficient and so on.
ECR Number Environmental Commitment Record Requirements Description of ADOT Responsibilities TMP-3 The following measures will be implemented for the Selected Alternative: • All equipment exhaust systems will be in good working order. Properly designed engine enclosures and intake silencers will be used. • Equipment will be maintained on a regular basis. New equipment will be subject to new product emission standards. • Stationary equipment will be located as far away from sensitive receivers as possible. • Construction-related noise generators will be shielded from noise receivers (e.g., use temporary enclosures to shield generators or crushers, take advantage of site conditions to provide topographic separation). • Construction alerts will be distributed to keep the public informed of construction activities, and a toll-free number for construction-related complaints will be provided. • During the design phase, hours of operation will be evaluated to minimize disruptions during construction. ADOT to oversee for compliance TMP-4 Congestion from construction-related traffic will create temporary impacts in the project vicinity. The magnitude of these impacts will vary depending on the location of the sources of the fill material and of the disposition sites for surplus material, the land uses along the routes, the duration of hauling operations, staging locations, and the construction phasing. To identify acceptable routes and times of operation, ADOT, or its representative, will prepare an agreement with local agencies regarding hauling of construction materials on public streets. ADOT to oversee for compliance TP Attachment 000-0 Xxxxx Xxxxxxxx Xxxxxxx Project Record of Decision (ROD) Developer’s Environmental Commitment Requirements The following table includes the Project-specific environmental commitments as written in the ROD, with minor modifications for clarification purposes. As it relates to these Technical Provisions, references to freeway, project, South Mountain Freeway, proposed action, proposed freeway, and Selected Alternative mean the Project, and references to contractor mean Developer. Developer shall comply with and perform all of the contractor and ADOT requirements, including the ADOT obligations, commitments, and responsibilities, identified in the following table, except to the extent of those requirements that are specifically identified in the third column, entitled “Description of ADOT Responsibilities,” which are not delegated to Developer.
SUB-CONTRACTORS TO BE UTILIZED FOR PROJECT PSP shall perform the services under this Assignment with its own forces unless otherwise specified. If the scope of services is less than $100,000.00, a HUB Subcontracting Plan (HSP) is not required. If the scope of services will exceed $100,000.00, PSP shall submit an HSP for approval pursuant to Section 11.2 of the Agreement.
ADDITIONAL SPECIAL CONTRACT CONDITIONS A. Special Contract Conditions revisions: the corresponding subsections of the Special Contract Conditions referenced below are replaced in their entirety with the following:
Certain Agreements Related to Deposits Subject to Section 2.2, the Assuming Institution agrees to honor the terms and conditions of any written escrow or mortgage servicing agreement or other similar agreement relating to a Deposit liability assumed by the Assuming Institution pursuant to this Agreement.
Minimum Condition and Warranty Requirements for TIPS Sales All goods quoted or sold through a TIPS Sale shall be new unless clearly stated otherwise in writing. All new goods and services shall include the applicable manufacturers minimum standard warranty unless otherwise agreed to in the Supplemental Agreement.
Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.
SPECIAL CONDITIONS OF CONTRACT The following Special Conditions of Contract (SCC) shall supplement and/or amend the General Conditions of Contract (GCC).Whenever there is a conflict, the provisions herein shall prevail over those in the GCC. [The Procuring Entity shall select insert the appropriate wording using the samples below or other acceptable wording, and delete the text in italics].
