Common use of Site Requirements Clause in Contracts

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section 3.1 below. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing. (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article II. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: (i) Participate in a joint site survey with Seller (ii) Interior Space -Clears ten feet (10') from floor to bottom of lowest obstruction (iii) Floor Loading(minimum requirements) Structural Analysis always required (iv) Power Room 150 lb. per sq. ft (v) Switch Room 100 lb. per sq. ft.

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section 3.1 below. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing. (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article IIIII. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: (i) Participate in a joint site survey with Seller (ii) Interior Space -Clears ten feet (10') from floor to bottom of lowest obstruction (iii) Floor Loading(minimum requirements) Structural Analysis always required (iv) Power Room 150 lb. per sq. ft (v) Switch Room 100 lb. per sq. ft.

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section 3.1 below. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing. (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article IIIII. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: (i) Participate in a joint site survey with Seller (ii) Interior Space -Clears ten feet (10') from floor to bottom of lowest obstruction (iii) Floor Loading(minimum Loading (minimum requirements) Structural Analysis always required (iv) Power Room 150 lb. per sq. ft (v) Switch Room 100 lb. per sq. ft.

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section 3.1 belowArticle. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing. (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article II.Ill. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: : - Co-Location implementations will be based on a standard configuration, specified by Customer in conjunction with Lucent, to include; electronic equipment (i) Participate such as ATM concentrators, DSLAM, routers, etc.), equipment racks, cabling, and ancillary materials. Site specific requirements will be identified by Customer and adapted to specific configurations. - All implementations must be in a joint compliance with the Co-Location Agreements between Customer and the ILEC for each site. It is Customer's responsibility to review and apply the requirements of these agreements to the Co-Location implementations. - It is the intent of Customer to implement cageless installations wherever possible, and caged and virtual installations only when necessary due to the availability of ILEC facilities, scheduling and costs. JATO article III 1 08/24/99 Lucent Technologies Proprietary Use Pursuant to Company Instructions Customer will perform all engineering functions associated with the implementation of their network, including but not limited to the following list: - Develop and maintain floor plans, wiring and installation drawings - Develop and maintain instructions to guide Lucent installation forces - Understand and intemperate ILEC interconnect agreement - Develop long range plans for hardware evaluation and selection / substitutions - Collect site survey information to identify equipment rack layout (ILEC provided and/or Lucent installed), cable routes, cable distances, verify MDF frame, DSX bay, BDFB, and CO grounding positions and availability. - Identify changes to the standard configuration drawings and ▇▇▇▇ of Materials - Develop and maintain site-specific ▇▇▇▇ of materials (BOM's) and CAD drawings. - Develop and maintain appropriate technical documentation. - Determine Content and filing requirements of Co-Location agreements with Seller (iiILECs. - Placement of Purchase Order(s) Interior Space -Clears ten feet (10') from floor to bottom of lowest obstruction (iii) Floor Loading(minimum requirements) Structural Analysis always required (iv) Power Room 150 lb. per sq. ft (v) Switch Room 100 lb. per sq. ftfor Co-Location sites will begin the Implementation processes by Lucent.

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section 3.1 below. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing. (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article IIIII. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: (i) Participate in a joint site survey with Seller Seller (ii) Interior Space -Clears - Clears ten feet (10') from floor to bottom of lowest obstruction obstruction (iii) Floor Loading(minimum requirements) Structural Analysis always required required (iv) Power Room 150 lb. per sq. ft ft (v) Switch Room 100 lb. per sq. ft.

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section SECTION 3.1 below. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing.. SSUH2-37635-4 Lucent Technologies/Allegiance Telecom Confidential 27 31 (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article IIARTICLE III. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: (i) Participate in a joint site survey with Seller (ii) Interior Space -Clears space clears ten feet (10') from floor to bottom of lowest obstruction (iii) Floor Loading(minimum loading (minimum requirements) Structural Analysis structural analysis always required (iv) Power Room room 150 lb. per sq. ft (v) Switch Room room 100 lb. per sq. ft.

Site Requirements. (a) Customer is solely responsible for ensuring that the installation site is compliant with any site requirements identified by Seller for the installation and/or operation of any Products, Licensed Materials, or Services furnished by Seller under this Agreement. Such site requirements shall include, without limitation, those site requirements set forth in this Section 3.1 VI. 1 below. Seller agrees to cooperate with Customer to ensure compliance with all site requirements, provided that such cooperation shall not require Seller to incur any out-of-pocket costs unless the parties expressly agree otherwise in writing. (b) Customer shall be solely responsible for ensuring that the installation site complies with all applicable laws, orders, and regulations of federal, state and local governmental entities including, without limitation, those relating to environmental conditions. (c) Notwithstanding anything contained in this Agreement to the contrary, Seller shall have no liability to Customer, its employees, agents, and customers for any delay by Seller in completion of any installation or other Service to be provided by Seller under this Agreement if such delay is attributable to the failure by Customer to comply with any site requirements or to provide any other items which are the responsibility of Customer under this Article IIVI. (d) The site requirements which are solely the Customer's responsibility shall include but are not limited to the following: (i) Participate in a joint site survey with Seller (ii) Interior Space -Clears - Clears ten feet (10') from floor to bottom of lowest obstruction (iii) Floor Loading(minimum Loading (minimum requirements) Structural Analysis always required (iv) Power Room 150 lb. per sq. ft (v) Switch Room 100 lb. per sq. ft.)