Shutters Sample Clauses

Shutters. Verify measurements/dimensions and total number of openings to receive new shutters. Relocate required electrical /cable wires, to facilitate shutters installation. All exposed anchoring screws shall be the same color as the frame or concealed. Accordion storm shutters. The shutters and its components shall be installed in strict compliance with the Florida building code product approval (or Miami/Dade). The shutters shall be permanently attached. Homeowner and/or homeowner association will select the color of the new shutters. Remove all previously installed shutters, awnings and attachment hardware including makeshift shutters. Repair adjacent surfaces to match existing. 6.4 Contractor covenants to furnish its best skill and judgment in furthering the interests of the City. Contractor agrees to furnish efficient business administration and superintendence and use its best efforts to complete the Project in the best and soundest way and in the most expeditious and economical manner consistent with the interests of the City. 6.5 The reports, documents, and data to be provided shall represent an accurate assessment of the current status of the Project and of the Work remaining to be accomplished and it shall provide a sound basis for identifying variances and problems and for making management decisions. It shall be prepared and available to the City on a monthly basis. 6.6 Contractor shall be responsible for technically deficient Drawings, designs, reports, or studies due to Contractor’s errors and omissions, and shall promptly correct or replace all such deficient Work without cost to City. The Contractor shall also be responsible for all damages resulting from such errors and omissions. Payment in full by the City for Services performed does not constitute a waiver of this representation. 6.7 Contractor shall take into consideration such factors as natural and practical lines of severability, sequencing effectiveness, access and availability constraints, total time for completion, construction market conditions, availability of local labor and materials, community relations and any other factors pertinent to saving time and cost, considering fully the goal of increased local business and workforce participation. 6.8 Contractor shall take such measures as appropriate to provide that construction requirements will be covered in the separate subcontracts performed without duplication or overlap, sequenced to maintain completion of all Work on schedule. 6.9 ...
View SourceView Similar (5)
Shutters. When shutters are used, whether operating or decorative, they shall be equal to the width of one half of the adjacent window opening.
View SourceView Similar (3)
Shutters. Shutters may be used to the shareholders discretion as to protect their property from snow, rain, pollen, and to provide security for extended leaves from the park. All other times they must be up.
View Source
Shutters. 8.10.1 The types of shutters for doors, windows, ventilators, cupboards, etc., viz. panelled, glazed, wiregauzed, partly panelled and partly glazed or gauzed, ledged braced and battened, louvered etc., shall be asindicated and detailed in the drawings. All members of the shutter shall be made out of one piece andshall be straight without any warp or bow. They shall have smooth, well planed surfaces at right angles to eachother. The right angles of the shutters shall be checked by measuring the two diagonals from one extremecorner to the opposite one. 8.10.2 The contact surfaces of mortice and tenon and tongued and grooved joints shall be glued before ▇▇▇▇▇▇▇▇▇▇▇▇▇▇▇.▇▇ the case of double leaved shutters, the meeting ▇▇▇▇▇▇ shall be rebated 20 mm or as shown ondrawings. The rebating shall be splayed or square, as directed.All shutters shall be finished smooth with well planed faces.Tolerance in the thickness of joinery shall be + 2mm.Shutters shall be of correct size and shall fit into the frames without excessive cutting at the edges.Adding of wooden strip etc., to make up the size shall not be allowed.
View Source
Shutters. Please ensure your vehicle is clear of the shutter's path when using the loading bay- Shutters must only be opened by a member of staff & must not be touched during operation. It is not acceptable to hit the safety edge. If damage occurs due to misuse by you, or one of your representatives, you will be liable for any repairs.
View Source
Shutters. 8.5.1. All members of the shutter shall be made out of one piece and shall be straight without any wrap (or bow) and well planned surfaces at right angles to each other. The right angle of the shutter shall be checked by measuring the two diagonals from one extreme corner to opposite one. 8.5.2. Shutters shall be correct size and shall fit into the frames without excessive cuttings at the edges. Adding of wooden strips etc to make up the size shall not be allowed. Tolerance in the thickness of joinery shall be ± 2 mm.
View Source
Shutters. (a) Main Entrance : MS fabricated shutter of height upto 3 meters.
View Source

Related to Shutters

  • Toilets Papers, dust, cobwebs, peels, cans/bottles, cigarette butts, excrement on floor, bad smells, water pools, leaking sewage, rodents, animals (dead or alive), overflowing sanitary bins. 0 = NOT APPLICABLE 1 = UNACCEPTABLE (Toilets out of order. Toilets not cleaned on daily basis.) 2 = POOR (Toilets cleaned, but still visible signs of dirt, e.g. dust, cobwebs.) 3 = GOOD (Obvious sign that toilets are cleaned daily.) 4 = EXCELLENT (Extra effort is put in to ensure cleanliness, e.g. using detergents.)

  • GLASS Coverage is provided for all loss or damages to exterior glass, lettering, ornamentation and burglar foils thereon, caused by accidental breakage of such glass. The Insurer shall not be liable under this Additional Agreement for coverage for: a) loss or damage directly or indirectly from fire whether in the “premises” described in the “Declaration Page” or elsewhere; b) loss or damage caused directly or indirectly by the perils excluded in Perils Excluded section 6.B of the Commercial Property Broad Form (CMF-0005-1218); c) the cost of removing or replacing any fixtures or other obstructions to the replacement of the glass.

  • WINDOW CLEANING Tenant shall not clean, nor require, permit, suffer or allow any window in the Premises to be cleaned from the outside in violation of Section 202 of the Labor Law, or any other Requirement, or of the rules of the Board of Standards and Appeals, or of any other board or body having or asserting jurisdiction.

  • Dressing Rooms 42.1 Adequate dressing rooms with standard size lockers and sitting areas shall be provided if the physical facilities permit.

  • Fences Except for establishment cost incurred by the United States and replacement cost not due to the Landowner’s negligence or malfeasance, all other costs involved in maintenance of fences and similar facilities to exclude livestock are the responsibility of the Landowner. The installation or use of fences which have the effect of preventing wildlife access and use of the Easement Area are prohibited on the Easement Area, easement boundary, or on the Landowner’s land that is immediately adjacent to, and functionally related to, the Easement Area.