Common use of Scratches Clause in Contracts

Scratches. Surface scratches of 25mm or less where the primer or bare metal is not showing are acceptable providing they can be polished out. Four surface scratches on one panel is acceptable. • Unpainted mouldings, wheel trims - Scuffs and scratches of 25mm or less are acceptable provided the mouldings or trim is not broke, cracked or deformed. • Badges, emblems and labels - Badges, emblems, labels, logos and advertising livery should be professionally removed and returned to its original condition. Any damage caused by the fitting or removing, including faded paintwork is not acceptable. • Soft and hard top convertibles - Convertible roofs must be fully operational and free from damage, rips and tears. The rear window must not be cracked or creased. Accessories originally supplied must be present and in good condition. • Tow bars - If fitted, a tow bar must be in good, rust free condition with electrical connections that work and ball cover must be in place. Windows, glass, door mirrors and lamps • Panoramic roof - The roof must be fully functioning with no chips, cracks or holes. Surface scratches are acceptable provided they can be polished out. Maximum of four surface scratches is acceptable. • Windows/windscreens - Light scratching is acceptable providing it does not interfere with the driver’s line of sight and heating elements and automated driver assistance system still work properly. Damage in excess of 10mm in the driver’s line of vision or in excess of 40 mm elsewhere in the area swept by the vehicles wiper blades are not acceptable. Windscreen wipers must be present, secure and in good condition. • Door mirrors - Missing, cracked or damaged door mirror glass and housing units are not acceptable. If adjustable and/or heated door mirrors must work correctly. • Lamps and lenses - All lamps and lamp units must work. Minor scuff marks or scratches of 25mm or less are acceptable. Holes or cracks in the glass or plastic covers are not acceptable. Tyres and wheels • Tyre wear and damage - All tyres, including spare must meet the minimum UK legal requirements (minimum tread depth of 1.6mm in a continuous band around the centre three quarters of the tyre) and comply with the vehicle manufacturer’s recommendations of tyre type, class, size and speed rating for the vehicle. There must be no damage to sidewalls or tread. Uneven wear due to under or over inflation is not acceptable. • Wheels and wheel trims - Dents on wheel rims and trims are not acceptable. Scuffs up to 50mm on the total circumference of the wheel rim and on alloy wheel are acceptable. Damage to spokes, fascia or hub of the alloy wheel is not acceptable. There should be no rust or corrosion on the alloy wheel. Spare wheel and other tools must be intact, stowed and in good working order.

Scratches. Surface scratches of 25mm or less where the primer or bare metal is not showing are acceptable providing they can be polished out. Four surface scratches on one panel is acceptable. • Unpainted mouldings, wheel trims - Scuffs and scratches of 25mm or less are acceptable provided the mouldings or trim is not broke, cracked or deformed. • Badges, emblems and labels - Badges, emblems, labels, logos and advertising livery should be professionally removed and returned to its original condition. Any damage caused by the fitting or removing, including faded paintwork is not acceptable. • Soft and hard top convertibles - Convertible roofs must be fully operational and free from damage, rips and tears. The rear window must not be cracked or creased. Accessories originally supplied must be present and in good condition. • Tow bars - If fitted, a tow bar must be in good, rust free condition with electrical connections that work and ball cover must be in place. Windowswindows, glass, door mirrors and lamps lamPs • Panoramic roof - The roof must be fully functioning with no chips, cracks or holes. Surface scratches are acceptable provided they can be polished out. Maximum of four surface scratches is acceptable. • Windows/windscreens - Light scratching is acceptable providing it does not interfere with the driver’s line of sight and heating elements and automated driver assistance system still work properly. Damage in excess of 10mm in the driver’s line of vision or in excess of 40 mm elsewhere in the area swept by the vehicles wiper blades are not acceptable. Windscreen wipers must be present, secure and in good condition. • Door mirrors - Missing, cracked or damaged door mirror glass and housing units are not acceptable. If adjustable and/or heated door mirrors must work correctly. • Lamps and lenses - All lamps and lamp units must work. Minor scuff marks or scratches of 25mm or less are acceptable. Holes or cracks in the glass or plastic covers are not acceptable. Tyres tyres and wheels • Tyre wear and damage - All tyres, including spare must meet the minimum UK legal requirements (minimum tread depth of 1.6mm in a continuous band around the centre three quarters of the tyre) and comply with the vehicle manufacturer’s recommendations of tyre type, class, size and speed rating for the vehicle. There must be no damage to sidewalls or tread. Uneven wear due to under or over inflation is not acceptable. • Wheels and wheel trims - Dents on wheel rims and trims are not acceptable. Scuffs up to 50mm on the total circumference of the wheel rim and on alloy wheel are acceptable. Damage to spokes, fascia or hub of the alloy wheel is not acceptable. There should be no rust or corrosion on the alloy wheel. Spare wheel and other tools must be intact, stowed and in good working order. mechanical condition The vehicle should be retuned in a safe, legal and reliable mechanical condition capable of passing an MOT. If a warning light is illuminated the vehicle may not be drivable and collection will be aborted. Advisory illuminated alerts are acceptable. The following Items are not acceptable fair wear and tear: • Grooved brake discs or drums caused by excessive wear or worn out disc pads • Engine seized or damaged due to insufficient coolant/oil or with broken components • Manual transmission - Clutch slipping, noisy clutch or gearbox or excessively worn • Automatic – noisy gearbox or torque converter, abrupt gear Vehicle underside Any impact damage to the vehicles underside is not acceptable. equiPment and controls All original equipment, accessories and controls must be present and operate correctly. Nonstandard equipment installed must be removed and any damage repaired. All original fitted electrical equipment should be present and fully functional. cancellation form (Complete and return this form ONLY IF YOU WISH TO CANCEL THE CONTRACT HIRE AGREEMENT.) cancellation form To: Hyundai Capital UK Limited trading as Genesis Finance Contract Hire, Number One, Great Xxxxxxxxxx Xxx, Xxxxxxxxx Xxxxx, Xxxxx, XX0 0XX I/We «CustomerName» hereby give notice that I/We wish to cancel my/our hire agreement (number «AccountCode» ) in relation to «VehicleMake» «VehicleModel» Registration Number «VehicleRegNo» Name of customer(s): «CustomerName» Address of customer (s): «CustomerAddress» Signature of customer (s): Date: your right to cancel You can cancel the agreement within 14 days starting with the day after the day we signed the agreement without giving any reason. We will tell you when we have signed the agreement within 7 days of our doing so. informing us of your right to cancel To exercise the right to cancel, you must inform us of your decision to cancel the agreement by a clear statement (e.g. a letter sent by post or e-mail by writing to us at Hyundai Capital UK Limited trading as Genesis Finance Contract Hire, Number One, Great Xxxxxxxxxx Xxx, Xxxxxxxxx Xxxxx, Xxxxx, XX0 0XX, or via email at contactus@ xxxxxxxxxxxxxxxxxxxxxxxxxx.xx.xx). You may also use the model cancellation form above, but it is not obligatory. To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired. reimbursement following cancellation If you cancel the agreement, we will reimburse to you all payments received from you. We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel the agreement. We will make the reimbursement using the same means of payment as you used for making payments to us, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of the reimbursement. return of the Vehicle following cancellation If the vehicle has already been delivered during the cancellation period, you will return it at your own cost to the place from where it was delivered to you or such other place as we reasonably require. You must return the vehicle to us no later than 14 days from the day on which you communicate your cancellation of the agreement with us.

Scratches. Surface scratches of 25mm or less where the primer or bare metal is not showing are acceptable providing they can be polished out. Four surface scratches on one panel is acceptable. • Unpainted mouldings, wheel trims - Scuffs and scratches of 25mm or less are acceptable provided the mouldings or trim is not broke, cracked or deformed. • Badges, emblems and labels - Badges, emblems, labels, logos and advertising livery should be professionally removed and returned to its original condition. Any damage caused by the fitting or removing, including faded paintwork is not acceptable. • Soft and hard top convertibles - Convertible roofs must be fully operational and free from damage, rips and tears. The rear window must not be cracked or creased. Accessories originally supplied must be present and in good condition. • Tow bars - If fitted, a tow bar must be in good, rust free condition with electrical connections that work and ball cover must be in place. WindowsWINDOWS, glassgLASS, door mirrors and lamps DOOR MIRRORS AND LAMPS • Panoramic roof - The roof must be fully functioning with no chips, cracks or holes. Surface scratches are acceptable provided they can be polished out. Maximum of four surface scratches is acceptable. • Windows/windscreens - Light scratching is acceptable providing it does not interfere with the driver’s line of sight and heating elements and automated driver assistance system still work properly. Damage in excess of 10mm in the driver’s line of vision or in excess of 40 mm elsewhere in the area swept by the vehicles wiper blades are not acceptable. Windscreen wipers must be present, secure and in good condition. • Door mirrors - Missing, cracked or damaged door mirror glass and housing units are not acceptable. If adjustable and/or heated door mirrors must work correctly. • Lamps and lenses - All lamps and lamp units must work. Minor scuff marks or scratches of 25mm or less are acceptable. Holes or cracks in the glass or plastic covers are not acceptable. Tyres and wheels TYRES AND WHEELS • Tyre wear and damage - All tyres, including spare must meet the minimum UK legal requirements (minimum tread depth of 1.6mm in a continuous band around the centre three quarters of the tyre) and comply with the vehicle manufacturer’s recommendations of tyre type, class, size and speed rating for the vehicle. There must be no damage to sidewalls or tread. Uneven wear due to under or over inflation is not acceptable. • Wheels and wheel trims - Dents on wheel rims and trims are not acceptable. Scuffs up to 50mm on the total circumference of the wheel rim and on alloy wheel are acceptable. Damage to spokes, fascia or hub of the alloy wheel is not acceptable. There should be no rust or corrosion on the alloy wheel. Spare wheel and other tools must be intact, stowed and in good working order. MECHANICAL CONDITION The vehicle should be retuned in a safe, legal and reliable mechanical condition capable of passing an MOT. If a warning light is illuminated the vehicle may not be drivable and collection will be aborted. Advisory illuminated alerts are acceptable. The following Items are not acceptable fair wear and tear: • Grooved brake discs or drums caused by excessive wear or worn out disc pads • Engine seized or damaged due to insufficient coolant/oil or with broken components • Manual transmission - Clutch slipping, noisy clutch or gearbox or excessively worn • Automatic – noisy gearbox or torque converter, abrupt gear VEHICLE UNDERSIDE Any impact damage to the vehicles underside is not acceptable. EQUIPMENT AND CONTROLS All original equipment, accessories and controls must be present and operate correctly. Nonstandard equipment installed must be removed and any damage repaired. All original fitted electrical equipment should be present and fully functional. CANCELLATION FORM (Complete and return this form ONLY IF YOU WISH TO CANCEL THE CONTRACT HIRE AGREEMENT.) CANCELLATION FORM To: Hyundai Capital UK Limited trading as Genesis Finance Contract Hire, Number One, Great Exhibition Way, Kirkstall Forge, Leeds, LS5 3BF I/We «CustomerName» hereby give notice that I/We wish to cancel my/our hire agreement (number «AccountCode» ) in relation to «VehicleMake» «VehicleModel» Registration Number «VehicleRegNo» Name of customer(s): «CustomerName» Address of customer (s): «CustomerAddress» Signature of customer (s): Date: YOUR RIgHT TO CANCEL You can cancel the agreement within 14 days starting with the day after the day we signed the agreement without giving any reason. We will tell you when we have signed the agreement within 7 days of our doing so. INFORMINg US OF YOUR RIgHT TO CANCEL To exercise the right to cancel, you must inform us of your decision to cancel the agreement by a clear statement (e.g. a letter sent by post or e-mail by writing to us at Hyundai Capital UK Limited trading as Genesis Finance Contract Hire, Number One, Great Exhibition Way, Kirkstall Forge, Leeds, LS5 3BF, or via email at contactus@ xxxxxxxxxxxxxxxxxxxxxxxxxx.xx.xx). You may also use the model cancellation form above, but it is not obligatory. To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired. REIMBURSEMENT FOLLOWINg CANCELLATION If you cancel the agreement, we will reimburse to you all payments received from you. We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel the agreement. We will make the reimbursement using the same means of payment as you used for making payments to us, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of the reimbursement.

Scratches. Surface scratches of 25mm or less where the primer or bare metal is not showing are acceptable providing they can be polished out. Four surface scratches on one panel is acceptable. • Unpainted mouldings, wheel trims - Scuffs and scratches of 25mm or less are acceptable provided the mouldings or trim is not broke, cracked or deformed. • Badges, emblems and labels - Badges, emblems, labels, logos and advertising livery should be professionally removed and returned to its original condition. Any damage caused by the fitting or removing, including faded paintwork is not acceptable. • Soft and hard top convertibles - Convertible roofs must be fully operational and free from damage, rips and tears. The rear window must not be cracked or creased. Accessories originally supplied must be present and in good condition. • Tow bars - If fitted, a tow bar must be in good, rust free condition with electrical connections that work and ball cover must be in place. WindowsWINDOWS, glassgLASS, door mirrors and lamps DOOR MIRRORS AND LAMPS • Panoramic roof - The roof must be fully functioning with no chips, cracks or holes. Surface scratches are acceptable provided they can be polished out. Maximum of four surface scratches is acceptable. • Windows/windscreens - Light scratching is acceptable providing it does not interfere with the driver’s line of sight and heating elements and automated driver assistance system still work properly. Damage in excess of 10mm in the driver’s line of vision or in excess of 40 mm elsewhere in the area swept by the vehicles wiper blades are not acceptable. Windscreen wipers must be present, secure and in good condition. • Door mirrors - Missing, cracked or damaged door mirror glass and housing units are not acceptable. If adjustable and/or heated door mirrors must work correctly. • Lamps and lenses - All lamps and lamp units must work. Minor scuff marks or scratches of 25mm or less are acceptable. Holes or cracks in the glass or plastic covers are not acceptable. Tyres and wheels TYRES AND WHEELS • Tyre wear and damage - All tyres, including spare must meet the minimum UK legal requirements (minimum tread depth of 1.6mm in a continuous band around the centre three quarters of the tyre) and comply with the vehicle manufacturer’s recommendations of tyre type, class, size and speed rating for the vehicle. There must be no damage to sidewalls or tread. Uneven wear due to under or over inflation is not acceptable. • Wheels and wheel trims - Dents on wheel rims and trims are not acceptable. Scuffs up to 50mm on the total circumference of the wheel rim and on alloy wheel are acceptable. Damage to spokes, fascia or hub of the alloy wheel is not acceptable. There should be no rust or corrosion on the alloy wheel. Spare wheel and other tools must be intact, stowed and in good working order. MECHANICAL CONDITION The vehicle should be retuned in a safe, legal and reliable mechanical condition capable of passing an MOT. If a warning light is illuminated the vehicle may not be drivable and collection will be aborted. Advisory illuminated alerts are acceptable. The following Items are not acceptable fair wear and tear: • Grooved brake discs or drums caused by excessive wear or worn out disc pads • Engine seized or damaged due to insufficient coolant/oil or with broken components • Manual transmission - Clutch slipping, noisy clutch or gearbox or excessively worn • Automatic – noisy gearbox or torque converter, abrupt gear VEHICLE UNDERSIDE Any impact damage to the vehicles underside is not acceptable. EQUIPMENT AND CONTROLS All original equipment, accessories and controls must be present and operate correctly. Nonstandard equipment installed must be removed and any damage repaired. All original fitted electrical equipment should be present and fully functional. CANCELLATION FORM (Complete and return this form ONLY IF YOU WISH TO CANCEL THE CONTRACT HIRE AGREEMENT.) CANCELLATION FORM To: Hyundai Capital UK Limited trading as Genesis Finance Contract Hire, Number One, Great Xxxxxxxxxx Xxx, Xxxxxxxxx Xxxxx, Xxxxx, XX0 0XX I/We «CustomerName» hereby give notice that I/We wish to cancel my/our hire agreement (number «AccountCode» ) in relation to «VehicleMake» «VehicleModel» Registration Number «VehicleRegNo» Name of customer(s): «CustomerName» Address of customer (s): «CustomerAddress» Signature of customer (s): Date: YOUR RIgHT TO CANCEL You can cancel the agreement within 14 days starting with the day after the day we signed the agreement without giving any reason. We will tell you when we have signed the agreement within 7 days of our doing so. INFORMINg US OF YOUR RIgHT TO CANCEL To exercise the right to cancel, you must inform us of your decision to cancel the agreement by a clear statement (e.g. a letter sent by post or e-mail by writing to us at Hyundai Capital UK Limited trading as Genesis Finance Contract Hire, Number One, Great Xxxxxxxxxx Xxx, Xxxxxxxxx Xxxxx, Xxxxx, XX0 0XX, or via email at contactus@ xxxxxxxxxxxxxxxxxxxxxxxxxx.xx.xx). You may also use the model cancellation form above, but it is not obligatory. To meet the cancellation deadline, it is sufficient for you to send your communication concerning your exercise of the right to cancel before the cancellation period has expired. REIMBURSEMENT FOLLOWINg CANCELLATION If you cancel the agreement, we will reimburse to you all payments received from you. We will make the reimbursement without undue delay, and not later than 14 days after the day on which we are informed about your decision to cancel the agreement. We will make the reimbursement using the same means of payment as you used for making payments to us, unless you have expressly agreed otherwise; in any event, you will not incur any fees as a result of the reimbursement.