Scale of Production Sample Clauses

Scale of Production. 4.3.1 In accordance with present requirements and market conditions, the Parties agree that the annual Coal Tar processing capacity of the Company, at minimum, shall be 300,000 MT of anhydrous Coal Tar.
Sample 1
AutoNDA by SimpleDocs
Scale of Production. It is anticipated by the Parties that the annual production capacity of the Company at the completion of all investment phases will reach 28.5 billion units of miniature surface mount IC packages and 728,000 6-inch IC and Discrete wafers. The Board of Directors of the Company shall have complete autonomy in the formulation and execution of the Company's production policies in order to achieve these goals, and may expand or reduce the Company's scale of production in accordance with market demands and the Company's business situation.
Sample 1
Scale of Production. The scale of production of the CJV shall be decided by the Parties on the basis of further exploration, metallurgical tests and Feasibility Studies.
Sample 1
Scale of Production. Article 8. The production scale in phase one is 11 sets of MOCVD, producing 4-inch substrate epitaxial wafers and high-power and high-brightness LED chips; the production capacity is expected to be 20KK/month and the luminous efficiency to be larger than 100Lm/W; and it is expected that factory construction will be completed and design capacity will be attained by the end of 2010. It is expected that in phase two, an additional 10 sets of MOCVD will be produced for producing 4-inch and 6-inch substrate epitaxial wafers and high-power and high-brightness LED chips; the luminous efficiency will be 120Lm/W; and the production capacity will reach 44KK/month at the beginning of 2012. It is expected that in phase three, an additional 10 sets of MOCVD will be produced for producing 6-inch substrate epitaxial wafers and high-power and high-brightness LED chips; the luminous efficiency is to be larger than 135Lm/W; and the production capacity will reach 84KK/month in the third quarter of 2013. The investment allocation and capital contribution methodology for the second and third phases will be discussed and negotiated separately among the parties in the future, provided that a Party is only obliged to make capital contribution in accordance with the allocation and methodology to which it has agreed in writing.
Sample 1

Related to Scale of Production

  • Marketing of Production Except for contracts listed and in effect on the date hereof on Schedule 7.19, and thereafter either disclosed in writing to the Administrative Agent or included in the most recently delivered Reserve Report (with respect to all of which contracts the Borrower represents that it or its Subsidiaries are receiving a price for all production sold thereunder which is computed substantially in accordance with the terms of the relevant contract and are not having deliveries curtailed substantially below the subject Property’s delivery capacity), no material agreements exist which are not cancelable on 60 days notice or less without penalty or detriment for the sale of production from the Borrower’s or its Subsidiaries’ Hydrocarbons (including, without limitation, calls on or other rights to purchase, production, whether or not the same are currently being exercised) that (a) pertain to the sale of production at a fixed price and (b) have a maturity or expiry date of longer than six (6) months from the date hereof.

  • Sale of Products 11.1. All Products sold to the Customer shall remain the property of Proximus until they have been paid for in full, including all charges and taxes. In case of a deterioration of the Product, the unpaid part of the sales price shall become due immediately. For as long as the Customer has not paid the Product's sales price in full, the provisions relating to product rental shall apply.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Purchase and Sale of Products Xxxx agrees to purchase and receive from the Company, and the Company agrees to sell and deliver to Xxxx, the entire Products output of the Refinery from and including the Commencement Date through the end of the Term of this Agreement, at the prices determined pursuant to this Agreement and otherwise in accordance with the terms and conditions of this Agreement.

  • Supply of Product 3.1 In accordance with the terms of this Agreement, GENSIA SICOR (through SICOR) shall supply all of PURCHASER'S ordered requirements for Product in bulk form for use by PURCHASER in the Territories in accordance with the provisions of this Agreement. The right and license of PURCHASER to obtain, use and distribute Product (including, without limitation, the right to make or have made Product) from GENSIA SICOR and SICOR shall be (i) non-exclusive in the Non-exclusive Territory, and (ii exclusive in the Exclusive Territory; provided, however, that the rights and licenses set forth in clause (ii) above shall be co-exclusive in each jurisdiction in which GENSIA SICOR (or ALCO or SICOR, as the case may be) has binding written agreements, or binding written commitments that will lead to binding written agreements, to sell Product on the Restatement Date (which is limited to only those [ * ] and the [ * ] with whom GENSIA SICOR has commitments that are in existence on the Restatement Date), but only with respect to such third parties and only until the earlier of expiration or termination of such agreements; and provided, further that GENSIA SICOR shall use all diligent efforts (without any obligation to violate or alter the terms of such agreements existing on the Restatement Date) to provide PURCHASER with exclusive rights and licenses to sell the Products in the Territory as soon as possible. All Product hereunder shall be manufactured at SICOR's GMP facilities at Rho, Italy, the facility identified in Exhibit 9 hereto, the Santxx Xxxility and additional (as necessary and as provided in Section 6 below) GMP qualified facilities that are approved in advance by PURCHASER (which approval will not be unreasonably withheld). In addition, all Product shall be manufactured (A) in accordance with drug substance manufacturing and quality control procedures existing on the Effective Date, which drug substance manufacturing and quality control procedures have been included in manufacturer's Abbreviated Antibiotic Drug Application ("AADA") submitted to the FDA in 1996, and that will be submitted to other Regulatory Authorities in the Territory (which AADA shall include at least the elements set forth in the Drug Master File) in accordance with U.S. FDA current Good Manufacturing Practices, and (B) to the Q/C Specifications. GENSIA SICOR shall cause SICOR to use its diligent efforts to [ * ] in order to produce and supply all Product ordered by Purchaser hereunder and to meet the Product [ * ] that will be set forth in Schedule 1 hereto within [ * ] after the Restatement Date. In addition, GENSIA SICOR agrees to the following (and GENSIA SICOR agrees to cause SICOR to undertake):

  • Supply of Products During the term of this Agreement and any extension hereof, the Seller shall sell and supply the products as set out in Schedule 1 hereto (“Products”) to SiPM and SiPM shall buy from the Seller such Products on a non-exclusive basis. The specifications of the Products are set out in Schedule 2 hereto. SUPPLY AGREEMENT - SiPM A Supply Agreement is a document between two parties, a Supplier and a Purchaser. The Supplier can be an individual or business and is the party that " supplies," or sells, the goods to the Purchaser. The Purchaser can also be an individual or a business and is the party that purchases for its use the goods that the Supplier provides.

  • Use of Products 3.28.1 In the performance of this contract, Consultant shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired (i) competitively within a timeframe providing for compliance with the contract performance schedule; (ii) meeting contract performance requirements; or (iii) at a reasonable price.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Licensed Product “Licensed Product” shall mean any article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights. For clarity, a “Licensed Product” shall not include other product or material that (a) is used in combination with Licensed Product, and (b) does not constitute an article, composition, apparatus, substance, chemical material, method, process or service whose manufacture, use, or sale is covered or claimed by a Valid Claim within the Patent Rights.

  • Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.

Time is Money Join Law Insider Premium to draft better contracts faster.