Roadway Inspection Sample Clauses

Roadway Inspection. All phases of construction will be inspected for conformance with contract plans, specifications, and current specified and pertinent standards.
AutoNDA by SimpleDocs
Roadway Inspection. The Engineer shall visually inspect all roadway elements in the following three general categories: (1) Pavement, (2) Traffic Operations, and (3) Roadside Elements. The pavement category includes both asphaltic concrete and Portland cement concrete inspections. The traffic operations category includes traffic control systems, signing, pavement markings, channelization elements, Intelligent Transportation Systems (ITS), and night time inspections for signs and pavement markings. The pavement, traffic operations, and roadside elements to be assessed and inspected by the Engineer might include the following: ROADWAY ELEMENTS PAVEMENT TRAFFIC OPERATIONS ROADSIDE Rutting Raised Pavement Markers Vegetation Management Litter Sweeping Trees and Brush Drainage Encroachments Guardrails Guardrail End Treatments Cracking Striping Failures Pavement Graphics Ride Attenuators Edges Delineators Shoulders Shoulder Texturing Roadside Signs Railroad Crossings Signals Work Zones DocuSign Envelope ID: 90904BDD-89A4-444C-95B3-9A27EBA1981B

Related to Roadway Inspection

  • Safety Inspection During inspection of County facilities conducted by the State Division of Occupational Safety and Health for the purpose of determining compliance with the California OSHA requirements, an OCEA designated employee shall be allowed to accompany the inspector while the inspector is in the employee's agency/department. The employee so designated shall suffer no loss of pay when this function is performed during the employee's regularly scheduled work hours.

  • Goods Inspection The Commissioner of DAS, in consultation with the Client Agency, shall determine the manner and prescribe the inspection of all Goods and the tests of all samples submitted to determine whether they comply with all of the specifications in the Contract. If any Goods fail in any way to meet the specifications in the Contract, the Client Agency or the Commissioner of DAS may, in its sole discretion, either reject it and owe nothing or accept it and pay for it on an adjusted price basis, depending on the degree to which the Goods meet the specifications. Any decision pertaining to any such failure or rejection shall be final and binding.

  • Property Inspection The Servicer is required to inspect each Delinquent Mortgaged Property at such time and in such manner as is in accordance with Prudent Servicing Practices. The Servicer must prepare a Property Inspection Report following each inspection. All Property Inspection Reports must be retained by the Servicer and copies thereof must be forwarded to the Master Servicer promptly upon request. All expenses related to the foregoing shall be recoverable by the Servicer from the Principal or from Liquidation Proceeds, Insurance Proceeds, payments on the related Mortgage Loan or any other source relating to the related Mortgage Loan or the related Mortgaged Property. The foregoing shall not preclude the Servicer from recovering such expenses from the Borrower to the extent permitted by applicable law and the related Mortgage Loan Documents.

  • Records Inspection Payor shall keep, and shall require its Permitted Sellers to keep, complete, true and accurate books of accounts and records for the purpose of determining the basis and accuracy of payments to be made under this Agreement. Such records shall be kept in accordance with GAAP, showing Net Sales on country-by-country and Licensed Product-by-Licensed Product basis, and Payor’s or its Permitted Sellers’ usual internal practices and procedures (which shall be commercially reasonable), consistently applied. Such books and records shall be kept for at least [*] ([*]) years following the end of the Calendar Quarter to which they pertain. Such records will be open for inspection by Payee during such five (5) year period by independent accountants reasonably acceptable to Payor, solely for the purpose of verifying the basis and accuracy of amounts in the payment statements hereunder. Such inspections shall be made no more than [*] each Calendar Year, at reasonable time and on reasonable notice and shall be limited to information related to Licensed Products. Results of any such inspection shall be deemed to be Confidential Information of Payor. If any errors in favor of Payor are discovered in the course of such inspection, then within thirty (30) days of written request by Payee, Payor shall pay Payee those amounts that Payee would have received in the absence of such errors, plus interest pursuant to and in accordance with Section 6.1(c). Inspections conducted under this Section 6.5 shall be at the expense of Payee, unless a variation or error in favor of Payor exceeding [*] percent ([*] %) of the amount due for the period covered by the inspection is established in the course of such inspection, whereupon all reasonable, documented costs relating to the inspection for such period will be paid promptly by Payor. In the event of overpayment to Payee, any amount of such overpayment shall be fully creditable against amounts payable for the immediately succeeding Calendar Quarter.

  • Property Inspections The Servicer shall conduct property inspections in accordance with the milestones of the repair and rehabilitation plan for such Mortgaged Property and prepare Property Inspection Reports on any Mortgaged Property involving property damage over $15,000. The Servicer shall furnish a copy of the repair and rehabilitation plan for such Mortgaged Property to the Master Servicer upon request.

  • SITE INSPECTION Where a site inspection is required by the Bid Specifications or Project Definition, Bidder shall be required to inspect the site, including environmental or other conditions for pre-existing deficiencies that may affect the installed Product, equipment, or environment or services to be provided and, which may affect Bidder’s ability to properly deliver, install or otherwise provide the required Product. All inquiries regarding such conditions shall be made in writing. Bidder shall be deemed to have knowledge of any deficiencies or conditions which such inspection or inquiry might have disclosed. Bidder must provide a detailed explanation with its Bid if additional work is required under this clause in order to properly complete the delivery and installation of the required Product or provide the requested service.

  • IN INSPECTION Before, at the time of the Tenant accepting possession, or shortly thereafter, the Landlord and Tenant: (check one) ☐ - Agree to inspect the Premises and write any present damages or needed repairs on a move-in checklist. ☐ - Shall not inspect the Premises or complete a move-in checklist.

  • Maintenance and Inspection Consultant shall maintain complete and accurate records with respect to all costs and expenses incurred under this Agreement. All such records shall be clearly identifiable. Consultant shall allow a representative of City during normal business hours to examine, audit, and make transcripts or copies of such records and any other documents created pursuant to this Agreement. Consultant shall allow inspection of all work, data, documents, proceedings, and activities related to the Agreement for a period of three (3) years from the date of final payment under this Agreement.

  • The Site The site of the Project Highway (the “Site”) shall comprise the site described in Schedule-A in respect of which the Right of Way shall be provided by the Authority to the Contractor. The Authority shall be responsible for:

  • Installation, Inspection, and Maintenance The Contractor is responsible for installation and maintenance of the BMPs as a part of its Bid. The Design Professional shall obtain the services of a qualified testing laboratory to inspect the BMPs in accordance with the permits, the costs of such inspections to be borne by the Owner. In the event of Abnormal Weather Conditions or force majeure, the Contractor shall be compensated for re-installation of BMPs at established Unit Prices.

Time is Money Join Law Insider Premium to draft better contracts faster.