Product Manufacturer Sample Clauses

Product Manufacturer. (a) Parameters. For each accepted Company Product Schedule, Manufacturer will manufacture, test, package and deliver all items necessary to satisfy production and delivery requirements, and adjust work cell capacity as necessary to produce Products in accordance with the Product Specifications and Quality Requirements for the prices and fees set forth on the Fee and Price Schedule and in the Manufacturer's Exclusive Territory. Manufacturer shall use its good faith efforts to (i) provide design test support; (ii) identify the most cost efficient high quality ingredients and packaging to produce and ship the Products; (iii) provide a manufacturing work cell support volume and delivery requirements; (iv) test the Product in accordance with the Company Testing Procedures; and (v) package the Products in accordance with the "Company Packaging Specifications. In the absence of Company Testing Procedures and Company Packaging Specifications, Manufacturer may, at its option, use its own testing procedures and packaging specifications, or require Company to provide such procedures and specifications. When requested by Company, Manufacturer may, at its option and subject to agreed fee and cost adjustments, provide test development services, volume production and advanced packaging technologies for existing or future Products.
Product Manufacturer. NanoAxis shall incorporate Quantum Materials QD into NanoAxis products by modifying the QD to create new products to meet the demands of NanoAxis customers.
Product Manufacturer. All Product supplied to KYE pursuant to this Agreement shall be manufactured only by CATALYST’s designated Facility described in Schedule A, or at such other Affiliate or subcontractor as may be mutually agreed between the Parties in writing, such agreement not to be reasonably withheld, and which complies with the requirements of this Section 6. If CATALYST has the Product manufactured on its behalf, CATALYST shall cause and obligate its Facility to comply with all provisions hereof applicable to the manufacture of the Product, and any reference to CATALYST in such provisions shall, as appropriate, be deemed to include a reference to the applicable Facility of CATALYST. For avoidance of doubt, CATALYST shall not manufacture the Product in any other Facility that will result in a delay in supply to KYE, and until approval has been obtained from Health Canada (if applicable) and satisfactory audit, if necessary, and GMP status of the Facility are verified by KYE in writing.

Related to Product Manufacturer

  • Manufacturer The producer or provider of Agriculture and Lawn Equipment which possess the minimum quality, reliability, service, and value required by the Department and Customers. May be used interchangeably with Brand Name. Manufacturer’s Suggested Retail Price (MSRP) – The MSRP represents the Manufacturer’s recommended retail selling price, list price, published price, or other usual and customary price that would be paid by the Customer for specific Commodities without the benefit of a Contract resulting from this solicitation. It must be publicly listed, available, and verifiable by the Department. MSRP Credit – The MSRP price of OEM and Non-OEM Options, Parts, Accessory(ies) or Implements that are deducted from the Base Equipment price paid by the Customer if removed from the Base Equipment. MSRP List – The Manufacturer’s Suggested Retail Price List, a collection of MSRPs and related information broken down by specific Commodities. In the priority listed below, only the following are acceptable sources of current and revised MSRPs and MSRP Lists for use under the resulting Contract: • Manufacturer’s Annual U.S. Price Book, • Manufacturer’s official website or dealer software; and • Autodata, Inc. d/b/a Chrome Data’sTM Carbook Pro Fleet Edition.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Product Marking LICENSEE agrees to xxxx the LICENSED PRODUCTs sold in the United States with all applicable United States patent numbers. All LICENSED PRODUCTs shipped to or sold in other countries shall be marked in such a manner as to conform with the patent laws and practices of the country of manufacture or sale.

  • Product Labeling Xxx X’Xxxx shall affix a warning to the packaging, labeling, or directly on each Product provided for sale in retail outlets in California that states: WARNING: This product can expose you to DEHP, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to xxx.X00Xxxxxxxx.xx.xxx. Or, if Xxx X’Xxxx has testing data indicating the presence of other Proposition 65 listed chemicals in the Products in addition to DEHP, the following warning may be used: WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to xxx.X00Xxxxxxxx.xx.xxx.

  • Manufacturing Intrexon shall have the option and, in the event it so elects, shall use Diligent Efforts, to perform any manufacturing activities in connection with the Aquaculture Program that relate to the Intrexon Materials, including through the use of a suitable Third Party contract manufacturer. To the extent that Intrexon so elects, Intrexon may request that AquaBounty and Intrexon establish and execute a separate manufacturing and supply agreement, which agreement will establish and govern the production, quality assurance, and regulatory activities associated with manufacture of Intrexon Materials. Except as provided in Section 4.1, any manufacturing undertaken by Intrexon pursuant to the preceding sentence shall be performed in exchange for cash payments equal to Intrexon’s Fully Loaded Cost in connection with such manufacturing, on terms to be negotiated by the Parties in good faith. In the event that Intrexon does not manufacture Intrexon Materials or bulk quantities of other components of AquaBounty Products, then Intrexon shall provide to AquaBounty or a contract manufacturer selected by AquaBounty and approved by Intrexon (such approval not to be unreasonably withheld) all Information Controlled by Intrexon that is (a) related to the manufacturing of such Intrexon Materials or bulk qualities of other components of AquaBounty Products for use in the Field and (b) reasonably necessary to enable AquaBounty or such contract manufacturer (as appropriate) for the sole purpose of manufacturing such Intrexon Materials or bulk quantities of other components of AquaBounty Products. The costs and expenses incurred by Intrexon in carrying out such transfer shall be borne by Intrexon. Any manufacturing Information transferred hereunder to AquaBounty or its contract manufacturer shall not be further transferred to any Third Party, including any Product Sublicensee, or any AquaBounty Affiliate without the prior written consent of Intrexon; provided, however, that Intrexon shall not unreasonably withhold such consent if necessary to permit AquaBounty to switch manufacturers.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • Product Recall In the event that Warner or LeukoSite determines that an event, incident or circumstance has occurred which may result in the need for a recall or other removal of any Warner-LeukoSite Product, or any lot or lots thereof, from the market in any Designated Co-Promotion Country, it shall advise and consult with the other party with respect thereto. Warner shall make the final determination to recall or otherwise remove the Warner-LeukoSite Product or any lot or lots thereof from the market. Warner and LeukoSite shall share the costs and expenses of such recall or removal in each Designated Co-Promotion Country, including without limitation expenses and other costs or obligations to third parties, the cost and expense of notifying customers and costs and expenses associated with shipment of the recalled Product from a customer to either Warner or LeukoSite. Such costs shall be shared in proportion to their average shares of Total Profit during the two years preceding the giving of notice of recall to customers.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • Product Technical Support & Maintenance Licensee shall have the option of electing the Product technical support and maintenance (“maintenance”) set forth in the Contract by giving written notice to Contractor any time during the Centralized Contract term. Maintenance term(s) and any renewal(s) thereof are independent of the expiration of the Centralized Contract term and will not automatically renew. Maintenance shall include, at a minimum, (i) the provision of error corrections, updates, revisions, fixes, upgrade and new releases to Licensee, and (ii) Help Desk assistance with locally accessible “800” or toll free, local telephone service, or alternatively on-line Help Desk accessibility. Contractor shall maintain the Products so as to provide Licensee with the ability to utilize the Products in accordance with the Product documentation without significant functional downtime to its ongoing business operations during the maintenance term. Authorized User shall not be required to purchase maintenance for use of Product, and may discontinue maintenance at the end of any current maintenance term upon notice to Contractor. In the event that Authorized User does not initially acquire or discontinues maintenance of licensed Product, it may, at any time thereafter, reinstate maintenance for Product without any additional penalties or other charges, by paying Contractor the amount which would have been due under the Contract for the period of time that such maintenance had lapsed, at then current NYS net maintenance rates.