Product and Process Release Information Sample Clauses

Product and Process Release Information. The component and process are released after a PSW has been countersigned by an authorized Stoneridge Supplier Development employee. Changes of the process or component are not allowed after this point without prior notification to Stoneridge. Products from a mass-production process shall not be shipped to Stoneridge without a PPAP approval or an equivalent acceptable to Stoneridge in its sole discretion. Notification of PPAP approval is NOT an authorization to ship materials to a Stoneridge facility. Supplier shall follow Stoneridge shipping authorizations only. 5 Pre-Launch Process
AutoNDA by SimpleDocs
Product and Process Release Information. The Component and Process is released after a PSW has been countersigned by Continental SQM. Changes of the process or component are not allowed after this point without prior notification. Supplier’s components shall not be accepted by Continental for series production in case a product release has not been issued. Any production shipments received by Continental prior to obtaining a countersigned PSW will be rejected. The PSW does not constitute Application- or Manufacturing approval at Continental. In case a full approval cannot be achieved on time a written deviation approval is required prior to shipping parts to Continental for production. Continental shall inform the Supplier of such product release. .

Related to Product and Process Release Information

  • PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.

  • False Information The Borrower or any Obligor has given the Bank false or misleading information or representations.

  • Service Information Service Visit Date Mode of service Face-to face, telephone, etc. Responsibility for payment Used to exclude federal govt., WCB, etc. Main and secondary diagnoses ICD10-CA codes Main and other interventions and attributes CCI procedure codes and attributes Type of Anesthetic Identifies the type used for interventions (general, spinal, local, etc.) Provider types NACRS code assigned to provider type (MD, Dentist, RN, etc.) Doctor name and identifier Physician specific information Admit via Ambulance Used if a Client is brought to the service delivery site by ambulance Institution from and institution to Used when a Client is transferred from or to another acute care facility Visit disposition Discharged, admitted, left without being seen, etc. Schedule “D” Appendix 2 Additional Elements Required for Data Management (XXX) Client Identifying Information Province Client‟s Home Province AB, BC, SK, MB, NL, PE, NS, NB, QC, ON, NT, YT, NU, US, OC (Other Country), NR (Unsp. Non-resident) Service Information Facility Code AHS provided code that indicates service being provided. Facility Fee Dollar value of service being provided Alberta Health Physician Fee Billing Code Alberta Health Physician Service Fee code that further defines facility code Regional standard format and submission method remains as is via excel file and email. NOTE: Submission method may be adjusted in accordance with security standards of AHS. Schedule “D” Appendix 3

  • Service Information Pages Verizon shall include all VarTec NXX codes associated with the geographic areas to which each directory pertains, to the extent it does so for Verizon’s own NXX codes, in any lists of such codes that are contained in the general reference portion of each directory. VarTec’s NXX codes shall appear in such lists in the same manner as Verizon’s NXX information. In addition, when VarTec is authorized to, and is offering, local service to Customers located within the geographic area covered by a specific directory, at VarTec’s request, Verizon shall include, at no charge, in the “Customer Guide” or comparable section of the applicable alphabetical directories, VarTec’s critical contact information for VarTec’s installation, repair and Customer service, as provided by VarTec. Such critical contact information shall appear alphabetically by local exchange carrier and in accordance with Verizon’s generally applicable policies. VarTec shall be responsible for providing the necessary information to Verizon by the applicable close date for each affected directory.

  • zone Information Publication ICANN’s publication of root-zone contact information for the TLD will include Registry Operator and its administrative and technical contacts. Any request to modify the contact information for the Registry Operator must be made in the format specified from time to time by ICANN at xxxx://xxx.xxxx.xxx/domains/root/.

  • Course Materials The adoption of any course materials, print or electronic, after a Course Agreement is signed will require an agreed and signed addendum.

  • Submission of Grievance Information a) Upon appointment of the arbitrator, the appealing party shall within five days after notice of appointment forward to the arbitrator, with a copy to the School Board, the submission of the grievance which shall include the following:

  • Product Information EPIZYME recognizes that by reason of, inter alia, EISAI’s status as an exclusive licensee in the EISAI Territory under this Agreement, EISAI has an interest in EPIZYME’s retention in confidence of certain information of EPIZYME. Accordingly, until the end of all Royalty Term(s) in the EISAI Territory, EPIZYME shall keep confidential, and not publish or otherwise disclose, and not use for any purpose other than to fulfill EPIZYME’s obligations, or exercise EPIZYME’s rights, hereunder any EPIZYME Know-How Controlled by EPIZYME or EPIZYME Collaboration Know-How, in each case that are primarily applicable to EZH2 or EZH2 Compounds (the “Product Information”), except to the extent (a) the Product Information is in the public domain through no fault of EPIZYME, (b) such disclosure or use is expressly permitted under Section 9.3, or (c) such disclosure or use is otherwise expressly permitted by the terms and conditions of this Agreement. For purposes of Section 9.3, each Party shall be deemed to be both the Disclosing Party and the Receiving Party with respect to Product Information. For clarification, the disclosure by EPIZYME to EISAI of Product Information shall not cause such Product Information to cease to be subject to the provisions of this Section 9.2 with respect to the use and disclosure of such Confidential Information by EPIZYME. In the event this Agreement is terminated pursuant to Article 12, this Section 9.2 shall have no continuing force or effect, but the Product Information, to the extent disclosed by EPIZYME to EISAI hereunder, shall continue to be Confidential Information of EPIZYME, subject to the terms of Sections 9.1 and 9.3 for purposes of the surviving provisions of this Agreement. Each Party shall be responsible for compliance by its Affiliates, and its and its Affiliates’ respective officers, directors, employees and agents, with the provisions of Section 9.1 and this Section 9.2.

  • SITE INFORMATION General description The Xxxxx Power Station is situated approximately half way between Bethal and Ogies on the R545, being just over 30 km from each town and 10 km north-west of Kriel town. Xxxxx Power Station is situated in a summer rainfall area with an average annual precipitation of about 750 mm falling almost entirely during the months of October to April. The average rainfall per month generally exceeds 40 mm during this period, although drought periods do occur which can last for 20 days or longer. Drought periods occur most frequently during the months of October/November and March/April. January is statistically the highest rainfall month with an average monthly rainfall of about 130 mm. June has the lowest rainfall with an average monthly rainfall of about 7 mm. Approximately 85% of the annual rainfall occurs in the summer months and heavy falls of 125 to 150 mm occasionally occur in a single day. The annual average number of thunderstorms is about 75. These storms are often violent with severe lightning and strong (but short-lived) gusty winds and are sometimes accompanied by hail. This region has among the highest hail frequencies in South Africa; about 4 to 7 occurrences (depending mainly on altitude) may be expected annually. January is normally the hottest month with an average daily maximum temperature of 27°C with a mean daily temperature in winter being about 16°C. Winter average daily temperatures vary from 18, 5°C maximum to -1°C minimum. The extreme temperatures recorded range from 34, 7°C to minus 12, 4°C for the period 1920 - 1984. (Source: Weather Bureau, Pretoria) Winds are generally light to moderate except during thunderstorms. Generally the prevailing wind directions are from the North West during the day and from the east at night. During daytime, the prevailing winds are from the north-western direction. During night-time, the prevailing winds are from the north-eastern direction. The highest recorded average wind speed is 17, 6 km/hour. The average wind velocity over the year is 14, 5 km/hour. (Source: Xxxxxx & Xxxxxx, 1996, Reference 4, page 2.5.) Existing buildings, structures, and plant & machinery on the Site Not applicable. The Contractor to specify any information required if necessary. Subsoil information Not applicable. The Contractor to specify any information required if necessary. Hidden services All known services will be brought to the attention of the Contractor by Employers Representative. Should the Contractor encounter any other services in the work area, he will immediately bring them to the attention of the Employers Representative who will issue instructions as to what actions are to be taken. The protection of all pipes, gauges and plant is of extreme importance. Should any damage take place, which is due to the Contractors negligence, another Contractor will be brought onto site to affect repairs. All costs will be to the account of the Contractor who caused damage. Other reports and publicly available information The assumed 1 in 10 year rainfall figures are: Month Cumulative rain (mm) No of days with rainfall > 10mm January 200 6 February 150 6 March 120 5 April 110 4 May 40 3 June 20 2 July 30 2 August 30 2 September 60 3 October 140 6 November 160 7

  • Project Information Except for confidential information designated by the City as information not to be shared, Consultant agrees to share Project information with, and to fully cooperate with, those corporations, firms, contractors, public utilities, governmental entities, and persons involved in or associated with the Project. No information, news, or press releases related to the Project, whether made to representatives of newspapers, magazines, or television and radio stations, shall be made without the written authorization of the City’s Project Manager.

Time is Money Join Law Insider Premium to draft better contracts faster.