Precision and Accuracy Sample Clauses

Precision and Accuracy. The Xxxxxx-Xxxxxxx models (2007, 2008) were calibrated to field-surveyed landslide and debris-flow- runout inventories conducted after extreme storms in February and November of 1996 (Xxxxxxx et al., 1999). Within the eight study areas, field crews walked up all channels with sustained gradients less than 40% and recorded the runout track and initiation location of every landslide and debris flow that deposited material in the channels. This method provided a census of all landslides that impacted channels. To associate the surveyed locations with topographic attributes, these locations were transcribed into a GIS and overlain on a digital elevation model. Locations were recorded using 1:6000- scale aerial photographs and 1:24,000-scale topographic maps. Most landslides were hidden under forest canopy and not visible on the photos. GPS units were used for location in only the two study areas surveyed after the November storm. The accuracy and precision of the digitized landslide locations is not known; Xxxxxx and Xxxxxxx (2007) assumed that the correct initiation point was located somewhere within a 60-meter-diameter circle centered on the digitized initiation point. This was consistent with the length scale to which topographic features could be resolved with the 10-meter-cell size DEMs derived by interpolation of 40-foot contour lines on 1:24,000-scale topographic maps available at that time. This length scale is sufficient to resolve the headwalls at the upper extent of the small headwater basins tributary to fish-bearing streams, but each headwall may contain dozens of bedrock hollows within which landslides typically originate. The calibrated model gives the landslide density associated with any set of topographic attributes, so when integrated over any study area it will produce the correct number of landslides, but variations in density are only resolved with a precision of 60 meters or more, insufficient to pinpoint individual hollows. Predictions can be no more precise or accurate than the data used to calibrate the models. Now, however, LiDAR-derived DEMs can provide far higher precision and accuracy. LiDAR point clouds are commonly interpolated to gridded DEMs with a cell size of one meter, a data density 100 times greater than the 10-meter DEMs previously available. With these DEMs, individual landslide initiation sites can be resolved. These newer, higher-precision DEMs were used with the Xxxxxx and Xxxxxxx (2007, 2008) models for the HCP and ...
AutoNDA by SimpleDocs

Related to Precision and Accuracy

  • Information provided to be accurate All financial and other information which is provided in writing by or on behalf of the Borrower under or in connection with any Finance Document will be true and not misleading and will not omit any material fact or consideration.

  • Information and Access 5.1 The Customer shall:

  • Certification of Accuracy The following parties have reviewed the information above and certify, to the best of their knowledge, that the information they have provided is true and accurate. Landlord's Signature Date: Print Name: Tenant’s Signature Date: Print Name: Tenant’s Signature Date: Print Name: Agent’s Signature Date:

  • Complete and Accurate Information Contractor represents and warrants that all statements and information provided to HHS are current, complete, and accurate. This includes all statements and information in this Contract and any related Solicitation Response.

  • Full and Accurate Disclosure No statement of fact made by Borrower in this Agreement or in any of the other Loan Documents contains any untrue statement of a material fact or omits to state any material fact necessary to make statements contained herein or therein not misleading. There is no material fact presently known to Borrower which has not been disclosed to Lender which adversely affects, nor as far as Borrower can foresee, might adversely affect, the Property or the business, operations or condition (financial or otherwise) of Borrower.

  • Data Accuracy The Custodian has no responsibility for, or duty to review, verify or otherwise perform any investigation as to the completeness, accuracy or sufficiency of, any data or information provided by or on behalf of the Client, any persons authorized by the Client, any Third Party Agent, any Market Participant or any Authorized Data Sources, except to the extent the Custodian has agreed in writing to perform reconciliations, variance or tolerance checks or other specific forms of data review under this Agreement.

  • Accuracy and Completeness of Information No written information, report or other papers or data (excluding financial projections and other forward looking statements) furnished to the Agent or any Lender by, on behalf of, or at the direction of, the Borrower, any other Obligor or any of their respective Subsidiaries in connection with or relating in any way to this Agreement, contained any untrue statement of a fact material to the creditworthiness of the Borrower, any other Obligor or any of their respective Subsidiaries or omitted to state a material fact necessary in order to make such statements contained therein, in light of the circumstances under which they were made, not misleading. The written information, reports and other papers and data with respect to the Borrower, any other Obligor or any of their respective Subsidiaries or the Unencumbered Assets (other than projections and other forward-looking statements) furnished to the Agent or the Lenders in connection with or relating in any way to this Agreement was, at the time so furnished, complete and correct in all material respects, or has been subsequently supplemented by other written information, reports or other papers or data, to the extent necessary to give in all material respects a true and accurate knowledge of the subject matter. All financial statements furnished to the Agent or any Lender by, on behalf of, or at the direction of, the Borrower, any other Obligor or any of their respective Subsidiaries in connection with or relating in any way to this Agreement, present fairly, in accordance with GAAP consistently applied throughout the periods involved, the financial position of the Persons involved as at the date thereof and the results of operations for such periods. All financial projections and other forward looking statements prepared by, or on behalf of the Borrower, any other Obligor or any of their respective Subsidiaries that have been or may hereafter be made available to the Agent or any Lender were or will be prepared in good faith based on reasonable assumptions. No fact or circumstance is known to the Borrower which has had, or may in the future have (so far as the Borrower can reasonably foresee), a Material Adverse Effect which has not been set forth in the financial statements referred to in Section 6.1(k) or in such information, reports or other papers or data or otherwise disclosed in writing to the Agent and the Lenders prior to the Effective Date.

  • Inspection and Access Landlord and its agents, representatives, and contractors may enter the Premises at any reasonable time to inspect the Premises and to make such repairs as may be required or permitted pursuant to this Lease and for any other business purpose. Landlord and Landlord’s representatives may enter the Premises during business hours on not less than 48 hours advance written notice (except in the case of emergencies in which case no such notice shall be required and such entry may be at any time) for the purpose of effecting any such repairs, inspecting the Premises, showing the Premises to prospective purchasers and, during the last year of the Term, to prospective tenants or for any other business purpose. Landlord may erect a suitable sign on the Premises stating the Premises are available to let or that the Project is available for sale. Landlord may grant easements, make public dedications, designate Common Areas and create restrictions on or about the Premises, provided that no such easement, dedication, designation or restriction materially, adversely affects Tenant’s use or occupancy of the Premises for the Permitted Use. At Landlord’s request, Tenant shall execute such instruments as may be necessary for such easements, dedications or restrictions. Tenant shall at all times, except in the case of emergencies, have the right to escort Landlord or its agents, representatives, contractors or guests while the same are in the Premises, provided such escort does not materially and adversely affect Landlord’s access rights hereunder.

  • Inclusion and accessibility The institution will provide support to incoming mobile participants with fewer opportunities, according to the requirements of the Erasmus Charter for Higher Education. Information and assistance can be provided by the following contact points and information sources: Country Available infrastructure adjusted for people with Description of infrastructure Contact e-mail and phone Website for information FROM TO CZ DE --- --- --- DE CZ --- --- xxxx://xxx.xxxxxxxxx.xxxx.xx/?la ng=en Country Available support services for people with Description of infrastructure Contact e-mail and phone Website for information FROM TO CZ DE --- --- --- DE CZ --- --- --- Information Although a brief overview is provided in this agreement, more detailed information is sent to the nominees in order for them to prepare their exchange.

  • Cooperation and Access The Cooperative Member agrees that it will cooperate in compliance with any reasonable requests for information and/or records made by the Cooperative. The Cooperative reserves the right to audit the relevant records of any Cooperative Member. Any breach of this provision shall be considered material and shall make the Agreement subject to termination on ten (10) days written notice to the Cooperative Member.

Time is Money Join Law Insider Premium to draft better contracts faster.