Common use of Point of Interconnection Clause in Contracts

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site metering and telemetering: Net metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert the Power Company’s Rules and Regulations for Distributed Resources and the Power Company’s Technical Guidelines for Interconnection and Parallel Operation] EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTION

Point of Interconnection. The point of interconnection will be at the point where the consumer’s secondary wires attach to the lugs inside the meter base. See Drawing No. [1], dated [Application date], which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company Cooperative Cooperative shall construct the following interconnection facilities: Not applicable. See the Power Company Cooperative Feasibility Study, a copy of which is attached hereto and made a part hereof. Not applicable. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Not applicable. Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company Cooperative hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company Cooperative for all actual costs, including any applicable taxes, associated with the Power CompanyCooperative’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power CompanyCooperative’s Interconnection Facilities is estimated to be $ $0.00. The Consumer will pay to the Power Company Cooperative a deposit of $ $0.00 coincident with the execution of the Agreement. EXHIBIT B This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. Cooperative The net metering facilities will be located at . Power Company[description of physical location] Cooperative, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site onsite metering and telemetering: Net metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Cooperative Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Cooperative Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company Cooperative will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company Cooperative all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power CompanyCooperative, which will own the meter(s). Consumer and Power Company Cooperative hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company Cooperative for all actual costs, including any applicable taxes, associated with the Power CompanyCooperative’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ $0.00. However, the Cooperative will require that each meter supplied by the Cooperative be capable of supplying Automated Meter Readings to the Cooperative and the Consumer will be assessed the monthly Automated Meter Reading Service charge specified in the Cooperative’s Special Service Charges Policy. EXHIBIT C POWER COMPANY COOPERATIVE REQUIREMENTS [insert the Power Company’s See attached Service Policy No SP425 “Rules and Regulations for Distributed Resources Qualifying CoGeneration and the Small Power Company’s Technical Guidelines for Interconnection Production Facilities” along with its Exhibits A and Parallel Operation] B. EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereofNot applicable. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTION

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site metering and telemetering: Net metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert the Power Company’s Rules and Regulations for Distributed Resources and the Power Company’s Technical Guidelines for Interconnection and Parallel Operation] EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTIONDESCRIPTION . A more detailed description of the Electric Generating Facility is attached.

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site metering and telemetering: Net metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert the Power Company’s Rules and Regulations for Distributed Resources and the Power Company’s Technical Guidelines for Interconnection and Parallel Operation] EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTIONDESCRIPTION . A more detailed description of the Electric Generating Facility is

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s and Power Company’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site metering and telemetering: Net metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert Attach the Power Company’s Rules and Regulations for Distributed Resources and the Power Company’s Technical Guidelines for Interconnection and Parallel Operation] EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTION

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B METERING EQUIPMENT This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering facilities will are to be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site metering and telemetering: Net metering Metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System Company’s electric distribution system to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert A visible and lockable disconnect switch for the Power Company’s Rules and Regulations for Distributed Resources generator must be accessible to power company personnel at all times. This disconnect switch must be able to interrupt the maximum output of the generator and the Power Company’s Technical Guidelines maximum load of the service connected to the power company. This switch is to be clearly labeled as a generator disconnect switch. The customer must provide adequate space and equipment for Interconnection and Parallel Operation] metering. The location of the meter will be at the sole discretion of the power company. A voltage study will be performed by the power company to determine the impact of the generator to the line drop compensation controls of voltage regulators. Three phase generator systems will be connected to the utility as a grounded-wye system. Lightning arrestors will be installed on the customer side of the service. EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by A transient stability study may be required before interconnection of the Transmission Owner and/or Transmission Provider generation equipment. This study will determine the impact on the regional grid in the event of transmission faults and generator bus faults. This study, a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by if required, will be at the Transmission Owner/Transmission Provider in connection with the construction expense of the necessary generator owner. A relay coordination study may be required before interconnection of the generation equipment. This study will calibrate the relays operating the transmission facilities/upgrades identified breakers for the change in fault currents and power flows. This study, if required, will be at the attached report.] expense of the generator owner. EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTIONE

Point of Interconnection. The point of interconnection will be at the point where the consumer’s secondary wires attach to the lugs inside the meter base. See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Not applicable. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Not applicable. Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering instrumentation as required for on site metering and telemetering: Net metering will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Equipment as set forth in this Exhibit B. The cost for the Net Metering Equipment is estimated to be $ . However, the Cooperative will require that each meter supplied by the Cooperative be capable of supplying Automated Meter Readings to the Cooperative and the Consumer will be assessed the monthly Automated Meter Reading Service charge specified in the Cooperative’s Special Service Charges Policy. EXHIBIT C POWER COMPANY REQUIREMENTS [insert the Power Company’s See attached Service Policy No SP425 “Rules and Regulations for Distributed Resources Qualifying CoGeneration and the Small Power Company’s Technical Guidelines for Interconnection Production Facilities” along with its Exhibits A and Parallel Operation] B. EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] Not applicable EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTION

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B NET BILLING EQUIPMENT This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering biling facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering billin instrumentation as required for on site metering and telemetering: Net metering billing will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Billing Equipment as set forth in this Exhibit B. The cost for the Net Metering Billing Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert the Power Company’s Rules and Regulations for Distributed Resources and the Power Company’s Technical Guidelines for Interconnection and Parallel Operation] EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTIONDESCRIPTION . A more detailed description of the Electric Generating Facility is

Point of Interconnection. The point of interconnection will be at the point where . See Drawing No. , dated , which drawing is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Power Company Power Company shall construct the following interconnection facilities: See the Power Company Feasibility Study, a copy of which is attached hereto and made a part hereof. Interconnection Facilities to be Furnished by Consumer Consumer shall construct the following interconnection facilities: Cost Responsibility Consumer shall be solely responsible for all costs associated with Consumer’s construction of Interconnection Facilities. Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s construction of Interconnection Facilities as set forth in this Exhibit A. The cost of the Power Company’s Interconnection Facilities is estimated to be $ . The Consumer will pay to the Power Company a deposit of $ coincident with the execution of the Agreement. EXHIBIT B NET BILLING EQUIPMENT This Exhibit B is a part of the Agreement for Interconnection and Parallel Operation between Consumer and Power Company. The net metering biling facilities will be located at . Power Company, at Consumer’s expense, will purchase, install, own, operate, and maintain the following net metering billin instrumentation as required for on site metering and telemetering: Net metering billing will be accomplished using a single meter or pair of meters capable of registering the flow of electricity in each direction from the Power Company Distribution System to Consumer’s electric consuming facilities located on the Premises, and from Consumer’s Electric Generating Facility to the Power Company Distribution System. If the existing electrical meter or meters in service at the Consumer’s Premises is/are not capable of measuring the flow of electricity in each direction, the Power Company will purchase, install, own, operate, and maintain an approved meter or meters that is/are capable of measuring electricity in each direction. The Consumer will pay the Power Company all expenses involved in either modifying the existing meter(s) or providing a new meter(s) capable of measuring the flow of electricity in each direction. Maintenance of the meter(s) will be the responsibility of the Power Company, which will own the meter(s). Consumer and Power Company hereby acknowledge and agree that the cost listed below is only an estimate and that Consumer hereby agrees to and shall reimburse Power Company for all actual costs, including any applicable taxes, associated with the Power Company’s installation of Net Metering Billing Equipment as set forth in this Exhibit B. The cost for the Net Metering Billing Equipment is estimated to be $ . EXHIBIT C POWER COMPANY REQUIREMENTS [insert the Power Company’s Rules and Regulations for Distributed Resources and the Power Company’s Technical Guidelines for Interconnection and Parallel Operation] EXHIBIT D TRANSMISSION OWNER AND/OR TRANSMISSION PROVIDER REQUIREMENTS [The Consumer shall pay for all facilities and upgrades identified by the Transmission Owner and/or Transmission Provider in the , a copy of which is attached hereto and made a part hereof. The Consumer shall enter into any facilities/construction agreements required by the Transmission Owner/Transmission Provider in connection with the construction of the necessary transmission facilities/upgrades identified in the attached report.] EXHIBIT E ELECTRIC GENERATING FACILITY DESCRIPTION