New Supply Agreements Sample Clauses

New Supply Agreements. Corixa shall notify GSK Canada in writing prior to entering, during the term of this Agreement, into any new supply agreement(s) relevant to the manufacture, storage or distribution of Products intended for use in the Territory or amending any Existing Supply Agreement in a manner that alters the manufacture, storage or distribution of Products intended for use in the Territory. Corixa shall provide GSK Canada with a reasonable time, after such notification, to review and comment upon any such supply agreement(s) or amendment(s), and Corixa shall make reasonable efforts to implement all reasonable GSK Canada comments, provided that such comments do not benefit GSK Canada at the expense of Corixa or any of Corixa's licensees or corporate partners in the Corixa Territory. Following the execution of any such new supply agreement(s) or amendment(s) of any Existing Supply Agreement, the Parties shall amend this Agreement as necessary to make it consistent with the applicable terms of such supply agreement(s) or amendment(s). GSK Canada may terminate this Agreement, pursuant to Section 10.5(a), if it is materially adversely affected by the terms of any such new supply agreement(s) or amendment(s) or the corresponding amendment of this Agreement. Redacted
Sample 1
AutoNDA by SimpleDocs
New Supply Agreements. The Obligors must within 2 Business Days of entering any new Supply Agreement, deliver to the purchaser an Irrevocable Payment Direction and provide confirmation and evidence satisfactory to the Agent that it has done so.
Sample 1
New Supply Agreements. At or prior to April 30, 2002, IMC or its Affiliate shall have entered into sulphur supply agreements to be effective at Closing with the suppliers separately agreed upon by the parties, which shall be consistent with the terms agreed upon by the parties.
Sample 1

Related to New Supply Agreements

  • Supply Agreements For a period of three years from the consummation of the IPO, Odetics shall not unilaterally terminate or assign its guarantee obligation with respect to any supply agreement pursuant to which it has guaranteed the performance by ATL of ATL's obligations, unless such suppliers have consented to the termination or assignment of such guarantee.

  • Supply Agreement Seller and Buyer, or their Affiliates, shall have executed the Supply Agreement.

  • TIPS Sales and Supplemental Agreements If awarded, when making a sale under this awarded contract, the terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, defects, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, AIA Contract, Invoice, etc.) (“Supplemental Agreement” as used herein) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement. The Supplemental Agreement shall dictate the scope of services, the project delivery expectations, the scheduling of projects and milestones, the support requirements, and all other terms applicable to the specific sale(s) between the Vendor and the TIPS Member.

  • Sales and Supplemental Agreements The terms of the specific TIPS order, including but not limited to: shipping, freight, insurance, delivery, fees, bonding, cost, delivery expectations and location, returns, refunds, terms, conditions, cancellations, order assistance, etc., shall be controlled by the purchase agreement (Purchase Order, Contract, Invoice, etc.) (hereinafter “Supplemental Agreement”) entered into between the TIPS Member Customer and Vendor only. TIPS is not a party to any Supplemental Agreement. All Supplemental Agreements shall include Vendor’s Name, as known to TIPS, and TIPS Contract Name and Number. Vendor accepts and understands that TIPS is not a legal party to TIPS Sales and Vendor is solely responsible for identifying fraud, mistakes, unacceptable terms, or misrepresentations for the specific order prior to accepting. Vendor agrees that any order issued from a customer to Vendor, even when processed through TIPS, constitutes a legal contract between the customer and Vendor only. When Vendor accepts or fulfills an order, even when processed through TIPS, Vendor is representing that Vendor has carefully reviewed the order for legality, authenticity, and accuracy and TIPS shall not be liable or responsible for the same. In the event of a conflict between the terms of this TIPS Vendor Agreement and those contained in any Supplemental Agreement, the provisions set forth herein shall control unless otherwise agreed to and authorized by the Parties in writing within the Supplemental Agreement.

  • Quality Agreement If appropriate or if required by Applicable Law, the parties will also agree upon a Quality Agreement containing quality assurance provisions for the Manufacture of Product (“Quality Agreement”), which agreement will also be attached to the applicable Work Order and incorporated by reference in the Work Order.

  • Indemnity for Underlying Sales and Supplemental Agreements Vendor shall be solely responsible for any customer claims or any disputes arising out of TIPS Sales or any Supplemental Agreement as if sold in the open-market. The Parties agree that TIPS shall not be liable for any claims arising out of Vendor’s TIPS Sales or Supplemental Agreements, including but not limited to: allegations of product defect or insufficiency, allegations of service defect or insufficiency, allegations regarding delivery defect or insufficiency, allegations of fraud or misrepresentation, allegations regarding pricing or amounts owed for TIPS sales, and/or allegations regarding payment, over-payment, under-payment, or non-payment for TIPS Sales. Payment/Drafting, overpayment/over-drafting, under- payment/under-drafting, or non-payment for TIPS Sales between customer and Vendor and inspections, rejections, or acceptance of such purchases shall be the exclusive respective obligations of Vendor/Customer, and disputes shall be handled in accordance with the terms of the underlying Supplemental Agreement(s) entered into between Vendor and Customer. Vendor acknowledges that TIPS is not a dealer, subcontractor, agent, or reseller of Vendor’s goods and services and shall not be responsible for any claims arising out of alleged insufficiencies or defects in Vendor’s goods and services, should any arise.

  • License Agreements (a) Each Borrower and Guarantor shall (i) promptly and faithfully observe and perform all of the material terms, covenants, conditions and provisions of the material License Agreements to which it is a party to be observed and performed by it, at the times set forth therein, if any, (ii) not do, permit, suffer or refrain from doing anything that could reasonably be expected to result in a default under or breach of any of the terms of any material License Agreement, (iii) not cancel, surrender, modify, amend, waive or release any material License Agreement in any material respect or any term, provision or right of the licensee thereunder in any material respect, or consent to or permit to occur any of the foregoing; except, that, subject to Section 9.19(b) below, such Borrower or Guarantor may cancel, surrender or release any material License Agreement in the ordinary course of the business of such Borrower or Guarantor; provided, that, such Borrower or Guarantor (as the case may be) shall give Agent not less than thirty (30) days prior written notice of its intention to so cancel, surrender and release any such material License Agreement, (iv) give Agent prompt written notice of any material License Agreement entered into by such Borrower or Guarantor after the date hereof, together with a true, correct and complete copy thereof and such other information with respect thereto as Agent may request, (v) give Agent prompt written notice of any material breach of any obligation, or any default, by any party under any material License Agreement, and deliver to Agent (promptly upon the receipt thereof by such Borrower or Guarantor in the case of a notice to such Borrower or Guarantor and concurrently with the sending thereof in the case of a notice from such Borrower or Guarantor) a copy of each notice of default and every other notice and other communication received or delivered by such Borrower or Guarantor in connection with any material License Agreement which relates to the right of such Borrower or Guarantor to continue to use the property subject to such License Agreement, and (vi) furnish to Agent, promptly upon the request of Agent, such information and evidence as Agent may reasonably require from time to time concerning the observance, performance and compliance by such Borrower or Guarantor or the other party or parties thereto with the material terms, covenants or provisions of any material License Agreement.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • License Agreement The Trust shall have the non-exclusive right to use the name "Invesco" to designate any current or future series of shares only so long as Invesco Advisers, Inc. serves as investment manager or adviser to the Trust with respect to such series of shares.

  • Complete Agreement; Amendments This Amendment and the Loan Documents represent the entire agreement about this subject matter and supersede prior negotiations or agreements with respect to such subject matter. All prior agreements, understandings, representations, warranties, and negotiations between the parties about the subject matter of this Amendment and the Loan Documents merge into this Amendment and the Loan Documents.

Time is Money Join Law Insider Premium to draft better contracts faster.