SPECIAL PACKAGING Items shall be packaged and cartoned so as to protect the contents from damage during shipment, handling and storage. Shipping container shall have a label with the following information: Name of Receiving Agency Agency Purchase Order Number Name of Supplier Item Description of Contents Manufacturer Name Model Name and Number
Funding Arrangements Minimum amounts/increments for Japan Local Currency Borrowings, repayments and prepayments: Same as Credit Agreement.
PROPOSED MOBILITY PROGRAMME The proposed mobility programme includes the indicative start and end months of the agreed study programme that the student will carry out abroad. The Learning Agreement must include all the educational components to be carried out by the student at the receiving institution (in table A) and it must contain as well the group of educational components that will be replaced in his/her degree by the sending institution (in table B) upon successful completion of the study programme abroad. Additional rows can be added as needed to tables A and B. Additional columns can also be added, for example, to specify the study cycle-level of the educational component. The presentation of this document may also be adapted by the institutions according to their specific needs. However, in every case, the two tables A and B must be kept separated, i.e. they cannot be merged. The objective is to make clear that there needs to be no one to one correspondence between the courses followed abroad and the ones replaced at the sending institutions. The aim is rather that a group of learning outcomes achieved abroad replaces a group of learning outcomes at the sending institution, without having a one to one correspondence between particular modules or courses. A normal academic year of full-time study is normally made up of educational components totalling 60 ECTS* credits. It is recommended that for mobility periods shorter than a full academic year, the educational components selected should equate to a roughly proportionate number of credits. In case the student follows additional educational components beyond those required for his/her degree programme, these additional credits must also be listed in the study programme outlined in table A. When mobility windows are embedded in the curriculum, it will be enough to fill in table B with a single line as described below: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Mobility window … Total: 30 Otherwise, the group of components will be included in Table B as follows: Component code (if any) Component title (as indicated in the course catalogue) at the sending institution Semester [autumn / spring] [or term] Number of ECTS* credits Course x … 10 Module y … 10 Laboratory work … 10 Total: 30 The sending institution must fully recognise the number of ECTS* credits contained in table A if there are no changes to the study programme abroad and the student successfully completes it. Any exception to this rule should be clearly stated in an annex of the Learning Agreement and agreed by all parties. Example of justification for non-recognition: the student has already accumulated the number of credits required for his/her degree and does not need some of the credits gained abroad. Since the recognition will be granted to a group of components and it does not need to be based on a one to one correspondence between single educational components, the sending institution must foresee which provisions will apply if the student does not successfully complete some of the educational components from his study programme abroad. A web link towards these provisions should be provided in the Learning Agreement. The student will commit to reach a certain level of language competence in the main language of instruction by the start of the study period. The level of the student will be assessed after his/her selection with the Erasmus+ online assessment tool when available (the results will be sent to the sending institution) or else by any other mean to be decided by the sending institution. A recommended level has been agreed between the sending and receiving institutions in the inter-institutional agreement. In case the student would not already have this level when he/she signs the Learning Agreement, he/she commits to reach it with the support to be provided by the sending or receiving institution (either with courses that can be funded by the organisational support grant or with the Erasmus+ online tutored courses). All parties must sign the document; however, it is not compulsory to circulate papers with original signatures, scanned copies of signatures or digital signatures may be accepted, depending on the national legislation. * In countries where the "ECTS" system it is not in place, in particular for institutions located in partner countries not participating in the Bologna process, "ECTS" needs to be replaced in all tables by the name of the equivalent system that is used and a weblink to an explanation to the system should be added. CHANGES TO THE ORIGINAL LEARNING AGREEMENT The section to be completed during the mobility is needed only if changes have to be introduced into the original Learning Agreement. In that case, the section to be completed before the mobility should be kept unchanged and changes should be described in this section. Changes to the mobility study programme should be exceptional, as the three parties have already agreed on a group of educational components that will be taken abroad, in the light of the course catalogue that the receiving institution has committed to publish well in advance of the mobility periods and to update regularly as ECHE holder. However, introducing changes might be unavoidable due to, for example, timetable conflicts. Other reasons for a change can be the request for an extension of the duration of the mobility programme abroad. Such a request can be made by the student at the latest one month before the foreseen end date. These changes to the mobility study programme should be agreed by all parties within four to seven weeks (after the start of each semester). Any party can request changes within the first two to five-week period after regular classes/educational components have started for a given semester. The exact deadline has to be decided by the institutions. The shorter the planned mobility period, the shorter should be the window for changes. All these changes have to be agreed by the three parties within a two-week period following the request. In case of changes due to an extension of the duration of the mobility period, changes should be made as timely as possible as well. Changes to the study programme abroad should be listed in table C and, once they are agreed by all parties, the sending institution commits to fully recognise the number of ECTS credits as presented in table C. Any exception to this rule should be documented in an annex of the Learning Agreement and agreed by all parties. Only if the changes described in table C affect the group of educational components in the student's degree (table B) that will be replaced at the sending institution upon successful completion of the study programme abroad, a revised version should be inserted and labelled as "Table D: Revised group of educational components in the student's degree that will be replaced at sending institution". Additional rows and columns can be added as needed to tables C and D. All parties must confirm that the proposed amendments to the Learning Agreement are approved. For this specific section, original or scanned signatures are not mandatory and an approval by email may be enough. The procedure has to be decided by the sending institution, depending on the national legislation.
Unbundled Copper Sub-Loop (UCSL) is a copper facility of any length provided from the cross-box in the field up to and including the End User’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the End User and the cross-box.
Unbundled Network Element Combinations 4.1 For purposes of this Section, references to “Currently Combined” Network Elements shall mean that the particular Network Elements requested by NewPhone are in fact already combined by BellSouth in the BellSouth network. References to “
Derivative Contracts (a) The Trustee shall, at the direction of the Master Servicer, on behalf of the Trust Fund, enter into Derivative Contracts, solely for the benefit of the Class SB Certificates. Any such Derivative Contract shall constitute a fully prepaid agreement. The Master Servicer shall determine, in its sole discretion, whether any Derivative Contract conforms to the requirements of Section 4.11(b) and (c). Any acquisition of a Derivative Contract shall be accompanied by an appropriate amendment to this Agreement, including an Opinion of Counsel, as provided in Section 11.01, and either (i) an Opinion of Counsel to the effect that the existence of the Derivative Contract will not adversely affect the availability of the exemptive relief afforded under ERISA by U.S. Department of Labor Prohibited Transaction Exemption 94-29, as most recently amended, 67 Fed. Reg. 54487 (August 22, 2002), or Prohibited Transaction Class Exemption 95-60, 60 Fed. Reg. 35925 (July 12, 1995), to the Holders of the Class A Certificates or the Class M Certificates, respectively, as of the date the Derivative Contract is entered into by the Trustee or (ii) the consent of each Holder of a Class A Certificate or a Class M Certificate to the acquisition of such Derivative Contract. All collections, proceeds and other amounts in respect of the Derivative Contracts payable by the Derivative Counterparty shall be distributed to the Class SB Certificates on the Distribution Date following receipt thereof by the Trustee. In no event shall such an instrument constitute a part of any REMIC created hereunder. In addition, in the event any such instrument is deposited, the Trust Fund shall be deemed to be divided into two separate and discrete sub-Trusts. The assets of one such sub-Trust shall consist of all the assets of the Trust other than such instrument and the assets of the other sub-Trust shall consist solely of such instrument.
Single-Premium Credit Life Insurance Policy In connection with the origination of any Mortgage Loan, no proceeds from any Mortgage Loan were used to finance a single-premium credit life insurance policy;
Single Premium Credit Life Insurance None of the proceeds of the Mortgage Loan were used to finance single-premium credit life insurance policies;
Derivative Counterparty Financial Information ▪ Determining current maximum probable exposure Depositor ▪ Determining current significance percentage Depositor ▪ Requesting required financial information (including any required accountants’ consent to the use thereof) or effecting incorporation by reference Depositor *This information need only be reported on the Form 10-D for the distribution period in which updated information is required pursuant to the Items. ADDITIONAL FORM 10-D DISCLOSURE Item on Form 10-D Party Responsible Item 8: Other Information Disclose any information required to be reported on Form 8-K during the period covered by the Form 10-D but not reported Any party responsible for the applicable Form 8-K Disclosure item Item 9: Exhibits Distribution Date Statement to Certificateholders Securities Administrator Exhibits required by Item 601 of Regulation S-K, such as material agreements Depositor EXHIBIT M ADDITIONAL FORM 10-K DISCLOSURE ADDITIONAL FORM 10-K DISCLOSURE Item on Form 10-K Party Responsible Item 1B: Unresolved Staff Comments Depositor Item 9B: Other Information Disclose any information required to be reported on Form 8-K during the fourth quarter covered by the Form 10-K but not reported Any party responsible for disclosure items on Form 8-K Item 15: Exhibits, Financial Statement Schedules Securities Administrator Depositor Reg AB Item 1112(b): Significant Obligors of Pool Assets Significant Obligor Financial Information* Depositor *This information need only be reported on the Form 10-D for the distribution period in which updated information is required pursuant to the Item. Reg AB Item 1114(b)(2): Credit Enhancement Provider Financial Information ▪ Determining applicable disclosure threshold Depositor ▪ Requesting required financial information (including any required accountants’ consent to the use thereof) or effecting incorporation by reference Depositor *This information need only be reported on the Form 10-D for the distribution period in which updated information is required pursuant to the Items. Reg AB Item 1115(b): Derivative Counterparty Financial Information ▪ Determining current maximum probable exposure Depositor ▪ Determining current significance percentage Depositor ▪ Requesting required financial information (including any required accountants’ consent to the use thereof) or effecting incorporation by reference Depositor *This information need only be reported on the Form 10-D for the distribution period in which updated information is required pursuant to the Items. ADDITIONAL FORM 10-K DISCLOSURE Item on Form 10-K Party Responsible Reg AB Item 1117: Legal Proceedings Any legal proceeding pending against the following entities or their respective property, that is material to Certificateholders, including any proceedings known to be contemplated by governmental authorities: ▪ Issuing Entity (Trust Fund) Trustee, Master Servicer, Securities Administrator and Depositor ▪ Sponsor (Seller) Seller (if a party to the Pooling and Servicing Agreement) or Depositor ▪ Depositor Depositor ▪ Trustee Trustee ▪ Securities Administrator Securities Administrator ▪ Master Servicer Master Servicer ▪ Custodian Custodian ▪ 1110(b) Originator Depositor ▪ Any 1108(a)(2) Servicer (other than the Master Servicer or the Securities Administrator) Servicer (as to itself) ▪ Any other party contemplated by 1100(d)(1) Depositor
Risk-Based Capital In the event that any Bank determines that (1) compliance with any judicial, administrative, or other governmental interpretation of any law or regulation or (2) compliance by such Bank or any corporation controlling such Bank with any guideline or request from any central bank or other governmental authority (whether or not having the force of law) has the effect of requiring an increase in the amount of capital required or expected to be maintained by such Bank or any corporation controlling such Bank, and such Bank determines that such increase is based upon its obligations hereunder, and other similar obligations, the Borrower shall pay to the Agent, for the account of the applicable Bank, such additional amount as shall be certified by such Bank to be the amount allocable to such Bank's obligations to the Borrower hereunder. Such Bank will notify the Borrower of any event occurring after the date of this Agreement that will entitle such Bank to compensation pursuant to this Section 2.11 as promptly as practicable after it obtains knowledge thereof and determines to request such compensation. Determinations by any Bank for purposes of this Section 2.11 of the effect of any increase in the amount of capital required to be maintained by such Bank and of the amount allocable to such Bank's obligations to the Borrower hereunder shall be conclusive, provided that such determinations are made on a reasonable basis.
