Mobile measurement Clause Samples

Mobile measurement. Perform measurement in the field as follows. [1] Set the KR-12A measurement mode to Concentration mode, Totalize mode, or Audio mode. In any mode, the value sent to the RP monitor is the same as in Totalize mode (actual data). [2] Enter the predetermined Label name and Sampling Volume into the KR-12A. If the Sampling Volume settings are used for all measurement points, no change is required, but before measurement, the Label name must always be entered. [3] Perform measurement at each point with the KR-12A. When a measurement is completed, measurement data are stored automatically in the buffer memory of the KR-12A. [4] Measurement can be repeated until the buffer memory of the KR-12A (500 data) be- comes full. Other features: - Sequence of measurement points can be freely changed. Because data are stored and managed using the Label names, data can be col- lected in any sequence. - Measurement count can be freely changed. Even if the same measurement point is measured repeatedly, data will be man- aged properly using the date and time information. - Measurement cycle can be freely changed. The measurement cycle can be changed, such as switching from daily to weekly checks. - Multiple KR-12A units can be managed. Because the label name is used to manage measurement points, simultaneous measurement with several KR-12A units is possible provided that there are no duplicate label names. When receiving data from the same measurement point, always select the KR-12A with the oldest data first.