Common use of Metering Equipment Clause in Contracts

Metering Equipment. The Net Energy delivered to Buyer shall be derived from data measured by the meter(s) and associated telecommunications equipment installed at the Delivery Point by SCE&G Transmission ("Buyer's Meter(s)") pursuant to any agreement between SCE&G Transmission and Seller for generator interconnection of the Facility. Seller shall authorize SCE&G Transmission to provide meter data to Buyer, and hereby grants Buyer with rights to physically access the Buyer's Meter. Seller shall be responsible for paying SCE&G Transmission for all costs relating to the Buyer's Meter, including, without limitation, its procurement, installation, operation, calibration, and maintenance. Seller shall ensure in its arrangement with SCE&G Transmission for the Buyer's Meter to include communication equipment that enables Buyer to access and read the meter from a remote location. Seller shall provide Buyer (at Seller's cost) with appropriate telephonic/electronic communication to allow Buyer to remotely read the meter. Except as provided in Sections 7.2 and 7.3, Buyer's Meter(s) shall be used for quantity measurements and billing under this Agreement. Seller, at its sole expense, may install and maintain check meters and all associated measuring equipment necessary to permit an accurate determination of the quantities of Net Energy delivered under this Agreement; provided, however, that such equipment shall be operated and maintained in a manner that does not interfere with the installation, maintenance, and operation of Buyer's Meter(s).

Metering Equipment. The Net Energy delivered to Buyer Buyer, and the RECs and other Environmental Attributes Delivered to Buyer, shall be derived from data measured by the meter(s) and associated telecommunications equipment installed at the Delivery Point by SCE&G Transmission ("Buyer's Meter(s)") pursuant to any agreement between SCE&G Transmission and Seller for generator interconnection of the Facility. Seller shall authorize SCE&G Transmission to provide meter data to Buyer, and hereby grants Buyer with rights to physically access the Buyer's Meter. Seller shall be responsible for paying SCE&G Transmission for all costs relating to the Buyer's Meter, including, without limitation, its procurement, installation, operation, calibration, and maintenance. Seller shall ensure in its arrangement with SCE&G Transmission for the Buyer's Meter to include communication equipment that enables Buyer to access and read the meter from a remote location. Seller shall provide Buyer (at Seller's cost) with appropriate telephonic/electronic communication to allow Buyer to remotely read the meter. Except as provided in Sections 7.2 and 7.3, Buyer's Meter(s) shall be used for quantity measurements and billing under this Agreement. Seller, at its sole expense, may install and maintain check meters and all associated measuring equipment necessary to permit an accurate determination of the quantities of Net Energy delivered under this Agreement; provided, however, that such equipment shall be operated and maintained in a manner that does not interfere with the installation, maintenance, and operation of Buyer's Meter(s).

Metering Equipment. The amount of Net Energy delivered to Buyer shall be derived from data measured by the meter(s) and associated telecommunications equipment installed at the Delivery Point by SCE&G DESC Transmission ("“Buyer's ’s Meter(s)"”) pursuant to any agreement between SCE&G DESC Transmission and Seller for generator interconnection of the Facility. Seller shall authorize SCE&G DESC Transmission to provide meter data to Buyer, and hereby grants Buyer with rights to physically access the Buyer's Meter’s Meter(s). Seller shall be responsible for paying SCE&G DESC Transmission for all costs relating to the Buyer's Meter’s Meter(s), including, without limitation, its procurement, installation, operation, calibration, and maintenance. Seller shall ensure in its arrangement with SCE&G DESC Transmission for the Buyer's Meter ’s Meter(s) to include communication equipment that enables Buyer to access and read the meter from a remote location. Seller shall provide Buyer (at Seller's ’s cost) with appropriate telephonic/electronic ELECTRONICALLY FILED - 2019 September 20 5:06 PM - SCPSC - Docket # 2019-184-E - Page 30 of 66 communication to allow Buyer to remotely read the meter. Except as provided in Sections 7.2 and 7.3, Buyer's ’s Meter(s) shall be used for quantity measurements and billing under this Agreement. Seller, at its sole expense, may install and maintain check meters (“Seller’s Meter(s)”) and all associated measuring equipment necessary to permit an accurate determination of the quantities of Net Energy delivered under this Agreement; provided, however, that such equipment shall be operated and maintained in a manner that does not interfere with the installation, maintenance, and operation of Buyer's ’s Meter(s).

Metering Equipment. The amount of Net Energy delivered to Buyer shall be derived from data measured by the meter(s) and associated telecommunications equipment installed at the Delivery Point by SCE&G DESC Transmission ("“Buyer's ’s Meter(s)"”) pursuant to any agreement between SCE&G DESC Transmission and Seller for generator interconnection of the Facility. Seller shall authorize SCE&G DESC Transmission to provide meter data to Buyer, and hereby grants Buyer with rights to physically access the Buyer's Meter’s Meter(s). Seller shall be responsible for paying SCE&G DESC Transmission for all costs relating to the Buyer's Meter’s Meter(s), including, without limitation, its procurement, installation, operation, calibration, and maintenance. Seller shall ensure in its arrangement with SCE&G DESC Transmission for the Buyer's Meter ’s Meter(s) to include communication equipment that enables Buyer to access and read the meter from a remote location. Seller shall provide Buyer (at Seller's ’s cost) with appropriate telephonic/electronic communication to allow Buyer to remotely read the meter. Except as provided in Sections 7.2 and 7.3, Buyer's ’s Meter(s) shall be used for quantity measurements and billing under this Agreement. Seller, at its sole expense, may install and maintain check meters (“Seller’s Meter(s)”) and all associated measuring equipment necessary to permit an accurate determination of the quantities of Net Energy delivered under this Agreement; provided, however, that such equipment shall be operated and maintained in a manner that does not interfere with the installation, maintenance, and operation of Buyer's ’s Meter(s).

Metering Equipment. The Net Energy (and related Electrical Products) delivered to Buyer shall be derived from data measured by the meter(s) and associated telecommunications equipment installed at the Delivery Point by SCE&G Transmission ("Buyer's Meter(s)") pursuant Meter(s)")pursuant to any agreement between SCE&G Transmission and Seller for generator interconnection of the Facility. Seller shall authorize SCE&G Transmission to provide meter data to Buyer, and hereby grants Buyer with rights to physically access the Buyer's Meter. Seller shall be responsible for paying SCE&G Transmission for all costs relating to the Buyer's Meter, including, without limitation, its procurement, installation, operation, calibration, and maintenance. Seller shall ensure in its arrangement with SCE&G Transmission for the Buyer's Meter to include communication equipment that enables Buyer to access and read the meter from a remote location. Seller shall provide Buyer (at Seller's cost) with appropriate telephonic/electronic communication to allow Buyer to remotely read the meter. Except as provided in Sections 7.2 and 7.3, Buyer's Meter(s) shall be used for quantity measurements and billing under this Agreement. Seller, at its sole expense, may install and maintain check meters and all associated measuring equipment necessary to permit an accurate determination of the quantities of Net Energy delivered under this Agreement; provided, however, . that such equipment shall be operated and maintained in a manner that does not interfere with the installation, maintenance, and operation of Buyer's Meter(s).